David Rao
Following Jeff's instructions I fail to do the dockstar_config July 07, 2011 01:07AM |
David Rao
Re: Following Jeff's instructions I fail to do the dockstar_config July 07, 2011 04:56AM |
dockstar arm arm926ejs - Seagate kirkwood
dockstar arm arm926ejs - Marvell kirkwood
make u-boot.kwb ... ... Preparing kirkwood boot image to boot from nand Nand ECC mode = default Nand page size = 0x800 Image Type: Kirkwood Boot from NAND Flash Image Data Size: 335456 Bytes = 327.59 kB = 0.32 MB Load Address: 00600000 Entry Point: 00600000 root@slackware:/tmp/clash/build/u-boot-2010.09#
David Rao
Re: Following Jeff's instructions I fail to do the dockstar_config July 07, 2011 05:07AM |
Marvell>> usb start (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Marvell>> ext2load usb 0:3 0x800000 tmp/clash/build/u-boot-2010.09/uboot.mtd0.kb Loading file "tmp/clash/build/u-boot-2010.09/uboot.mtd0.kwb" from usb device 0:) 524288 bytes read Marvell>> go 0x800200 ## Starting application at 0x00800200 ... ### ERROR ### Please RESET the board ###
Marvell>> ext2load usb 0:3 0x800000 tmp/clash/build/u-boot-2010.09/u-boot.kwb Loading file "tmp/clash/build/u-boot-2010.09/u-boot.kwb" from usb device 0:3 (u) 335972 bytes read Marvell>> go 0x800200 ## Starting application at 0x00800200 ... ### ERROR ### Please RESET the board ###
pazos
Re: Following Jeff's instructions I fail to do the dockstar_config July 07, 2011 03:07PM |
David Rao
Re: Following Jeff's instructions I fail to do the dockstar_config July 07, 2011 04:41PM |
pazos
Re: Following Jeff's instructions I fail to do the dockstar_config July 08, 2011 04:30AM |