Welcome! Log In Create A New Profile


uBoot & Pogoplug V1 (wallwart-ish)

Posted by davygravy 
uBoot & Pogoplug V1 (wallwart-ish)
September 28, 2011 08:47PM
I have just purchased a PogoPlug V1 (wallwart-ish) - the model w/ a singleton USB port.

Is there a uBoot posted here that will work correctly on it? If so, can you point me to docs that explicitly list:
•correct env var values in uBoot, both for booting Debian
•__important__ if this newer uBoot will also launch the original initrd/initramfs/ramdiskiimage and kernel? It would be nice if I could just write a script to launch it into Debian on a flash drive.
Re: uBoot & Pogoplug V1 (wallwart-ish)
September 29, 2011 07:36AM
I believe Jeff's original uboot install script will work.
wget http://jeff.doozan.com/debian/uboot/install_uboot_mtd0.sh

Take a look at the script. There is a part near the end which asks what type of device you have so that it sets the arcNumber correctly, and Pogoplug v1 is in the list.
Re: uBoot & Pogoplug V1 (wallwart-ish)
September 29, 2011 06:15PM
thnx @ kraqh3d, will check out the script...

Your Email:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.