Welcome! Log In Create A New Profile

Advanced

Dockstar fw_printenv error

Posted by pentolino 
Dockstar fw_printenv error
November 16, 2011 03:58AM
Hello and thanks for all the info here, they are really helpful.

I have a perfectly working installation of ArchLinuxArm, but since a few days the fw_printenv command is giving me this output:

Read error on /dev/mtd0: Cannot allocate memory

It started as random but now it seems permanent.
Would it be safe to reboot it to see if the error still remains?
May I risk to write something with fw_setenv?
I have a serial cable and I already reflashed another DOA dockstar, so as long as uboot is non compromised I guess I can recover, but I would need some pointer about what to do in this situation.

thanks,
Riccardo
Re: Dockstar fw_printenv error
November 27, 2011 03:40AM
Free up some RAM (stop some services) and run the command again.
Re: Dockstar fw_printenv error
November 27, 2011 06:19AM
Well it actually works now, with 55MB of free RAM; strange it didn't work with over 60MB free...
Thanks for the feedback, it seems it is not NAND related, but more RAM related...
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: