Welcome! Log In Create A New Profile

Advanced

Stubborn Stora

Posted by Avispao 
Stubborn Stora
January 15, 2019 02:44PM
Hi,

I hope anyone can help me to put one of my stora in right working order.

For the last three months I've been using one of my stora after having flash the last u-boot available from bodhi and updated the rootfs with 4.19 kernel files.
It was working untill last week, when the flash drive (I suppose that was the problem) started to make the system halt (I checked dmesg and I found that the filesystem didn't respond on time, many times)
So, I checked the filesystem in the usb flashdrive and I recreated it. I couldn't make the system boot.
I tried to use the backups of the kernel files, from 4.12 to 4.19... I checked and re-checked the environment variables values... I recreated three or four times the filesystem in the usb flashdrive... and nothing...
I'm starting to think about use the third newton's law with a hammer and the stora...

Please, can anyone give me a hint on how to fix this stubborn stora?

PS.: I've uploaded the complete (until it halts) bootlog, and the env variables archive. I have TTL serial access.
Attachments:
open | download - bootlog.stora.txt (3.6 KB)
open | download - env.stora.txt (3.3 KB)
Re: Stubborn Stora
January 15, 2019 10:34PM
Avispao,

> I'm starting to think about use the third newton's
> law with a hammer and the stora...

:) This problem should be easy to solve with serial console.

Power up, interrupt serial console at countdown and

setenv set_bootargs 'setenv bootargs console=ttys0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts earlyprintk=serial'
boot

And post the entire serial console log here (don't need to attach log file).

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Stubborn Stora
January 16, 2019 12:23PM
Hi again,

First of all, thank you very much for your time.

Second....

I can't imagine why this stora is trying to pull on my leg.
Now, after changing the bootargs as you suggested, the kernel hangs later... but it gives us a clarifier message. It tries to boot, but it stalls. Like someone said in my country "...es un comienzo."

Here is the console log:

"
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:38:05 -0700)
Netgear Stora MS2110

SoC:   Kirkwood 88F6281_A0
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0
Netgear Stora> setenv set_bootargs 'setenv bootargs console=ttys0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts earlyprintk=serial'
Netgear Stora> saveenv
Saving Environment to NAND...
Erasing NAND...
Erasing at 0xc0000 -- 100% complete.
Writing to NAND... OK
Netgear Stora> boot
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80
unable to get device descriptor (error=-1) retry: 5
2 USB Device(s) found
       scanning usb for storage devices...
Use USB retry period from the environment: 5 second(s)
1 Storage Device(s) found

Reset IDE: Bus 0: OK Bus 1: OK
  Device 0: Model: WDC WD30EZRX-00SPEB0 Firm: 80.00A80 Ser#:  WD-WCC4E0373115
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 2861588.4 MB = 2794.5 GB (5860533168 x 512)
  Device 1: Model: WDC WD30EZRX-00SPEB0 Firm: 80.00A80 Ser#:  WD-WCC4E0366238
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 2861588.4 MB = 2794.5 GB (5860533168 x 512)

Partition Map for USB device 0  --   Partition Type: DOS

Part    Start Sector    Num Sectors     UUID            Type
  1     2048            3991552         0c4ea8d9-01     83 Boot

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0
loading envs from usb 0 ...
** File not found /boot/uEnv.txt **

Partition Map for IDE device 0  --   Partition Type: EFI

Part    Start LBA       End LBA         Name
        Attributes
        Type GUID
        Partition GUID
  1     0x00000022      0x15d50a38e     "primary"
        attrs:  0x0000000000000000
        type:   ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
        type:   data
        guid:   e85015e8-c49a-447a-933f-c3ce63bfe7cd


Partition Map for IDE device 1  --   Partition Type: EFI

Part    Start LBA       End LBA         Name
        Attributes
        Type GUID
        Partition GUID
  1     0x00000022      0x15d50a38e     "primary"
        attrs:  0x0000000000000000
        type:   ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
        type:   data
        guid:   ee6d64bf-3fca-4520-a17d-a7a533559e77
running scan_disk ...
Scan device usb
device usb 0:1
1 bytes read in 691 ms (0 Bytes/s)
Found bootable drive on usb 0
loading uImage ...
4065608 bytes read in 1032 ms (3.8 MiB/s)
loading uInitrd ...
8691155 bytes read in 1259 ms (6.6 MiB/s)
loading DTB /boot/dts/kirkwood-netgear_stora_ms2000.dtb ...
11499 bytes read in 2615 ms (3.9 KiB/s)
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-4.16.1-kirkwood-tld-1
   Created:      2018-05-31  19:23:58 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4065544 Bytes = 3.9 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
   Image Name:   initramfs-4.16.1-kirkwood-tld-1
   Created:      2018-05-31  19:26:20 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    8691091 Bytes = 8.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
   Booting using the fdt blob at 0x1c00000
   Loading Kernel Image ... OK
   Loading Ramdisk to 037b6000, end 03fffd93 ... OK
   Loading Device Tree to 037b0000, end 037b5cea ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.16.1-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Mon Apr 9 00:51:18 PDT 2018
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: NETGEAR MS2000 / MS2110 aka Stora
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] Memory policy: Data cache writeback
[    0.000000] random: fast init done
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttys0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) earlyprintk=serial
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 108008K/131072K available (8192K kernel code, 754K rwdata, 2088K rodata, 1024K init, 282K bss, 23064K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (9184 kB)
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 755 kB)
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 283 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000011] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.007906] Switching to timer-based delay loop, resolution 5ns
[    0.014553] Console: colour dummy device 80x30
[    0.019117] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[    0.029761] pid_max: default: 32768 minimum: 301
[    0.034776] Security Framework initialized
[    0.039139] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.045806] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.054099] CPU: Testing write buffer coherency: ok
[    0.060386] Setting up static identity map for 0x100000 - 0x100058
[    0.066931] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[    0.072482] Hierarchical SRCU implementation.
[    0.081040] devtmpfs: initialized
[    0.090338] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.100347] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.106970] prandom: seed boundary self test passed
[    0.116973] prandom: 100 self tests passed
[    0.121145] pinctrl core: initialized pinctrl subsystem
[    0.127970] NET: Registered protocol family 16
[    0.133059] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.140813] audit: initializing netlink subsys (disabled)
[    0.147506] audit: type=2000 audit(0.130:1): state=initialized audit_enabled=0 res=1
[    0.155462] cpuidle: using governor ladder
[    0.159734] cpuidle: using governor menu
[    0.164310] Feroceon L2: Enabling L2
[    0.168047] Feroceon L2: Cache support initialised.
[    0.173372] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[    0.189978] No ATAGs?
[    0.199985] vgaarb: loaded
[    0.205367] SCSI subsystem initialized
[    0.209729] usbcore: registered new interface driver usbfs
[    0.215314] usbcore: registered new interface driver hub
[    0.220848] usbcore: registered new device driver usb
[    0.227166] clocksource: Switched to clocksource orion_clocksource
[    0.348006] VFS: Disk quotas dquot_6.6.0
[    0.352043] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.370103] NET: Registered protocol family 2
[    0.375379] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[    0.383193] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.390267] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.396663] TCP: Hash tables configured (established 1024 bind 1024)
[    0.403203] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.409117] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.415676] NET: Registered protocol family 1
[    0.420755] RPC: Registered named UNIX socket transport module.
[    0.426706] RPC: Registered udp transport module.
[    0.431526] RPC: Registered tcp transport module.
[    0.436254] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.443080] Unpacking initramfs...
[    1.371288] Freeing initrd memory: 8488K
[    1.375445] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.383305] Initialise system trusted keyrings
[    1.387916] Key type blacklist registered
[    1.392148] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    1.398803] zbud: loaded
[    1.402491] NFS: Registering the id_resolver key type
[    1.407681] Key type id_resolver registered
[    1.411882] Key type id_legacy registered
[    1.415926] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.422727] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.429488] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.436810] fuse init (API version 7.26)
[    1.441240] orangefs_debugfs_init: called with debug mask: :none: :0:
[    1.447948] orangefs_init: module version upstream loaded
[    1.453374] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled
[    8.621921] Key type asymmetric registered
[    8.626047] Asymmetric key parser 'x509' registered
[    8.631345] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    8.638921] io scheduler noop registered
[    8.642866] io scheduler deadline registered
[    8.647340] io scheduler cfq registered (default)
[    8.653645] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    8.663539] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[    8.671249] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    8.677584] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    8.684501] pci_bus 0000:00: root bus resource [bus 00-ff]
[    8.690432] PCI: bus0: Fast back to back transfers disabled
[    8.696050] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    8.704322] PCI: bus1: Fast back to back transfers enabled
[    8.709928] pci 0000:00:01.0: PCI bridge to [bus 01]
[    8.715621] mv_xor f1060800.xor: Marvell shared XOR driver
[    8.778161] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    8.785779] mv_xor f1060900.xor: Marvell shared XOR driver
[    8.848150] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    8.856003] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    8.863991] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[    8.880892] loop: module loaded
[    8.884722] sata_mv f1080000.sata: slots 32 ports 2
[    8.892877] scsi host0: sata_mv
[    8.896626] scsi host1: sata_mv
[    8.900082] ata1: SATA max UDMA/133 irq 33
[    8.904206] ata2: SATA max UDMA/133 irq 33
[    8.909289] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
[    8.915788] nand: Samsung NAND 256MiB 3,3V 8-bit
[    8.920476] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    8.928114] Scanning device for bad blocks
[    8.955180] Bad eraseblock 212 at 0x000001a80000
[    8.964540] Bad eraseblock 256 at 0x000002000000
[    8.969256] Bad eraseblock 257 at 0x000002020000
[    8.980217] Bad eraseblock 316 at 0x000002780000
[    8.984910] Bad eraseblock 317 at 0x0000027a0000
[    9.088864] Bad eraseblock 1236 at 0x000009a80000
[    9.098315] Bad eraseblock 1280 at 0x00000a000000
[    9.103092] Bad eraseblock 1281 at 0x00000a020000
[    9.114264] Bad eraseblock 1341 at 0x00000a7a0000
[    9.195620] 4 cmdlinepart partitions found on MTD device orion_nand
[    9.201971] Creating 4 MTD partitions on "orion_nand":
[    9.207199] 0x000000000000-0x000000100000 : "u-boot"
[    9.213376] 0x000000100000-0x000000500000 : "uImage"
[    9.219504] 0x000000500000-0x000002500000 : "rootfs"
[    9.225813] 0x000002500000-0x000010000000 : "data"
[    9.234825] libphy: Fixed MDIO Bus: probed
[    9.239995] libphy: orion_mdio_bus: probed
[    9.244143] [Firmware Warn]: /ocp@f1000000/mdio-bus@72004/ethernet-phy@8: Whitelisted compatible string. Please remove
[    9.261296] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    9.407224] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[    9.416013] ata1.00: ATA-9: WDC WD30EZRX-00SPEB0, 80.00A80, max UDMA/133
[    9.422789] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    9.432214] ata1.00: configured for UDMA/133
[    9.447119] scsi 0:0:0:0: Direct-Access     ATA      WDC WD30EZRX-00S 0A80 PQ: 0 ANSI: 5
[    9.456485] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    9.464877] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    9.477323] sd 0:0:0:0: [sda] Write Protect is off
[    9.487309] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.580952]  sda: sda1
[    9.588095] sd 0:0:0:0: [sda] Attached SCSI disk
[    9.967208] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[    9.987370] ata2.00: ATA-9: WDC WD30EZRX-00SPEB0, 80.00A80, max UDMA/133
[    9.994112] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   10.009769] ata2.00: configured for UDMA/133
[   10.024610] scsi 1:0:0:0: Direct-Access     ATA      WDC WD30EZRX-00S 0A80 PQ: 0 ANSI: 5
[   10.033932] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[   10.042131] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[   10.047519] sd 1:0:0:0: [sdb] Write Protect is off
[   10.052486] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   10.117968] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:26:f2:bb:20:6c
[   10.127081] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.134021] ehci-pci: EHCI PCI platform driver
[   10.139107]  sdb: sdb1
[   10.142384] ehci-orion: EHCI orion driver
[   10.146693] orion-ehci f1050000.ehci: EHCI Host Controller
[   10.153175] sd 1:0:0:0: [sdb] Attached SCSI disk
[   10.157944] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[   10.165852] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[   10.197213] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[   10.203549] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   10.210414] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.217699] usb usb1: Product: EHCI Host Controller
[   10.222601] usb usb1: Manufacturer: Linux 4.16.1-kirkwood-tld-1 ehci_hcd
[   10.229356] usb usb1: SerialNumber: f1050000.ehci
[   10.234802] hub 1-0:1.0: USB hub found
[   10.238694] hub 1-0:1.0: 1 port detected
[   10.243430] usbcore: registered new interface driver usb-storage
[   10.249947] mousedev: PS/2 mouse device common for all mice
[   10.607211] usb 1-1: new high-speed USB device number 2 using orion-ehci
[   10.808231] usb 1-1: New USB device found, idVendor=1e3d, idProduct=2096
[   10.814986] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   10.822187] usb 1-1: Product: Flash Disk
[   10.826671] usb 1-1: Manufacturer: USB 2.0
[   10.830898] usb 1-1: SerialNumber: CCBB0406031257390582548400
[   10.837455] usb-storage 1-1:1.0: USB Mass Storage device detected
[   10.844025] scsi host2: usb-storage 1-1:1.0
[   11.297222] rtc-mv f1010300.rtc: internal RTC not ticking
[   11.302848] i2c /dev entries driver
[   11.313500] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
[   11.323563] hidraw: raw HID events driver (C) Jiri Kosina
[   11.329491] drop_monitor: Initializing network drop monitor service
[   11.336132] NET: Registered protocol family 17
[   11.340743] Key type dns_resolver registered
[   11.345955] registered taskstats version 1
[   11.350121] Loading compiled-in X.509 certificates
[   11.355008] zswap: loaded using pool lzo/zbud
[   11.386610] Key type big_key registered
[   11.402966] Key type encrypted registered
[   11.410378] rtc-pcf8563 0-0051: setting system clock to 2019-01-16 19:13:54 UTC (1547666034)
[   11.419751] Warning: unable to open an initial console.
[   11.428599] Freeing unused kernel memory: 1024K
[   11.433861] Checked W+X mappings: passed, no W+X pages found
[   11.554437] systemd-udevd[113]: starting version 232
[   11.858378] scsi 2:0:0:0: Direct-Access     USB 2.0  Flash Disk       5.00 PQ: 0 ANSI: 2
[   11.875719] sd 2:0:0:0: [sdc] 3993600 512-byte logical blocks: (2.04 GB/1.90 GiB)
[   11.889809] sd 2:0:0:0: [sdc] Write Protect is off
[   11.899572] sd 2:0:0:0: [sdc] No Caching mode page found
[   11.904962] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[   11.927291]  sdc: sdc1
[   11.934795] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[   12.073646] usbcore: registered new interface driver uas
[   12.544869] md127: Warning: Device sdb1 is misaligned
[   12.561227] md127: detected capacity change from 0 to 6001185521664
[   13.219193] raid6: int32x1  gen()    72 MB/s
[   13.387704] raid6: int32x1  xor()    50 MB/s
[   13.557454] raid6: int32x2  gen()    92 MB/s
[   13.727246] raid6: int32x2  xor()    72 MB/s
[   13.897548] raid6: int32x4  gen()    98 MB/s
[   14.067295] raid6: int32x4  xor()    67 MB/s
[   14.237481] raid6: int32x8  gen()   103 MB/s
[   14.407541] raid6: int32x8  xor()    70 MB/s
[   14.411834] raid6: using algorithm int32x8 gen() 103 MB/s
[   14.417288] raid6: .... xor() 70 MB/s, rmw enabled
[   14.422105] raid6: using intx1 recovery algorithm
[   14.432275] xor: measuring software checksum speed
[   14.528839]    arm4regs  :   902.800 MB/sec
[   14.627266]    8regs     :   542.000 MB/sec
[   14.727286]    32regs    :   788.400 MB/sec
[   14.731494] xor: using function: arm4regs (902.800 MB/sec)
[   14.749176] async_tx: api initialized (async)
[   30.157420] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   30.327034] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200
[   30.327034]
[   30.336226] CPU: 0 PID: 1 Comm: init Not tainted 4.16.1-kirkwood-tld-1 #1
[   30.343046] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[   30.349377] [<c010f3f4>] (unwind_backtrace) from [<c010b734>] (show_stack+0x10/0x14)
[   30.357173] [<c010b734>] (show_stack) from [<c01198a8>] (panic+0xc0/0x258)
[   30.364094] [<c01198a8>] (panic) from [<c011b92c>] (do_exit+0x5e4/0xa64)
[   30.370834] [<c011b92c>] (do_exit) from [<c011ceac>] (do_group_exit+0xec/0xf0)
[   30.378096] [<c011ceac>] (do_group_exit) from [<c011cec0>] (SyS_exit_group+0x10/0x14)
[   30.385968] [<c011cec0>] (SyS_exit_group) from [<c0101000>] (ret_fast_syscall+0x0/0x50)
[   30.394007] Exception stack(0xc783bfa8 to 0xc783bff0)
[   30.399086] bfa0:                   00000000 00000004 00000002 00000000 00000002 00000001
[   30.407302] bfc0: 00000000 00000004 0000037c 000000f8 be99bf04 00000000 00000002 00000000
[   30.415513] bfe0: b6e42804 be99b918 004796e4 b6e42814
[   30.420600] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200
[   30.420600]
[   50.177232] random: crng init done
"

I'm now preparing another usb flashdrive...

Any hint on this problem?

As I said before, thank you very much.
Re: Stubborn Stora
January 17, 2019 02:46AM
Avispao,

> I'm now preparing another usb flashdrive...
>
> Any hint on this problem?

This problem does not seem to be kernel-related. So good to create a new rootfs on USB and boot that to verify.

-bodhi
===========================
Forum Wiki
bodhi's corner
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: