SOLVED: Can't write uboot env after upgrade to Debian Buster August 03, 2019 03:34PM |
Registered: 13 years ago Posts: 26 |
setenv mtdparts 'cmdlinepart.mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)'
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:17:19 -0700) Seagate GoFlex Net SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.1.14 (3921 ms) ** Getting IP Settings by DHCP (net_dhcp_c = 1): ** IP Address: 192.168.1.14 ** Subnet Mask: 255.255.255.0 ** Def Gateway: 192.168.1.254 ** Getting NFS Boot Server by DHCP (net_dhcp_s and net_dhcp_c = 1): ** NFS Boot Server: 192.168.1.1 ** Kernel Boot Arguments: ** console=ttyS0,115200 root=/dev/nfs rw rootfstype=nfs rootwait nfsroot=192.168.1.1:/srv/nfs/hosts/goflex-263BA8/,rsize=32768,wsize=32768,hard,intr,udp,v3 ip=192.168.1.14:192.168.1.1:192.168.1.254:255.255.255.0:dockstar:eth0:off mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) NFS loading uImage :192.168.1.1:/srv/nfs/hosts/goflex-263BA8/boot/uImage ... done Bytes transferred = 2043544 (1f2e98 hex) NFS loading uInitrd :192.168.1.1:/srv/nfs/hosts/goflex-263BA8/boot/uInitrd ... done Bytes transferred = 14739343 (e0e78f hex) NFS loading DTB :192.168.1.1:/srv/nfs/hosts/goflex-263BA8/boot/dts/kirkwood-goflexnet.dtb ... ### done Bytes transferred = 11397 (2c85 hex) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-4.19.0-5-marvell Created: 2019-07-27 19:14:38 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2043480 Bytes = 1.9 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-4.19.0-5-marvell Created: 2019-07-27 19:14:38 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 14739279 Bytes = 14.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 02000000 Booting using the fdt blob at 0x2000000 Loading Kernel Image ... OK Loading Ramdisk to 06cff000, end 07b0d74f ... OK Loading Device Tree to 06cf9000, end 06cfec84 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.0-5-marvell (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 Debian 4.19.37-5 (2019-06-19)
# fw_printenv arcNumber=3089 autoload=no bootargs=console=ttyS0,115200 root=/dev/nfs rw rootfstype=nfs rootwait nfsroot=192.168.1.1:/srv/nfs/hosts/dockstar/,rsize=32768,wsize=32768,hard,intr,udp,v3 ip=192.168.1.14:192.168.1.1:192.168.1.254:255.255.255.0:dockstar:eth0:off mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) bootcmd=run net_bootcmd bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=3 bootdev=usb bootfile=gpxelinux.0 console=ttyS0,115200 def_bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec device=0:1 devices=usb ide mmc disks=0 1 2 3 dnsip=192.168.1.254 dtb_file=/boot/dts/kirkwood-goflexnet.dtb ethact=egiga0 ethaddr=00:10:75:26:3B:A8 gatewayip=192.168.1.254 hostname=Goflex-Test if_netconsole=ping $serverip ipaddr=192.168.1.14 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x02000000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) net_bootcmd=run net_check_dhcp_c; run net_check_dhcp_s; run net_set_bootargs; run net_bootcmd_exec net_bootcmd_exec=run net_load_uimage; if run net_load_initrd; then if run net_load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi net_check_dhcp_c=if test $net_dhcp_c -eq 1 ; then run net_set_c_ip_dhcp; else run net_set_c_ip_stat; fi;echo ** IP Address: $ipaddr; echo ** Subnet Mask: $netmask; echo ** Def Gateway: $gatewayip net_check_dhcp_s=if test $net_dhcp_s -eq 1 && test $net_dhcp_c -eq 1 ; then run net_set_s_ip_dhcp; else run net_set_s_ip_stat; fi; echo ** NFS Boot Server: $net_nfs_server; echo net_dhcp_c=1 net_dhcp_s=1 net_load_dtb=echo NFS loading DTB :$net_nfs_server:$net_nfs_path/$net_nfs_dtb ... ; nfs $load_dtb_addr $net_nfs_server:$net_nfs_path/$net_nfs_dtb; echo net_load_initrd=echo NFS loading uInitrd :$net_nfs_server:$net_nfs_path/$net_nfs_initrd ...; nfs $load_initrd_addr $net_nfs_server:$net_nfs_path/$net_nfs_initrd; echo net_load_uimage=echo NFS loading uImage :$net_nfs_server:$net_nfs_path/$net_nfs_kernel ...; nfs $load_uimage_addr $net_nfs_server:$net_nfs_path/$net_nfs_kernel; echo net_nfs_dtb=boot/dts/kirkwood-goflexnet.dtb net_nfs_initrd=boot/uInitrd net_nfs_kernel=boot/uImage net_nfs_path=/srv/nfs/hosts/goflex-263BA8 net_nfs_server=192.168.1.1 net_set_bootargs=setenv serverip $net_nfs_server; setenv bootargs console=$console root=/dev/nfs rw rootfstype=nfs rootwait nfsroot=$net_nfs_server:$net_nfs_path/,rsize=32768,wsize=32768,hard,intr,udp,v3 ip=$ipaddr:$net_nfs_server:$gatewayip:$netmask:dockstar:eth0:off $mtdparts $custom_params; echo ** Kernel Boot Arguments:; echo ** $bootargs; echo net_set_c_ip_dhcp=dhcp; echo; echo ** Getting IP Settings by DHCP (net_dhcp_c = 1): net_set_c_ip_stat=setenv ipaddr $net_c_ipaddr; setenv netmask $net_c_netmask; setenv gatewayip $net_c_gatewayip; echo; echo ** Using static IP Settings (net_dhcp_c = 0): net_set_s_ip_dhcp=setenv net_nfs_server $serverip;echo; echo ** Getting NFS Boot Server by DHCP (net_dhcp_s and net_dhcp_c = 1): net_set_s_ip_stat=echo; echo ** Using static NFS Boot Server (net_dhcp_s or net_dhcp_c = 0) : netmask=255.255.255.0 partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.1.1 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_ready_retry=15 # cat /proc/cmdline console=ttyS0,115200 root=/dev/nfs rw rootfstype=nfs rootwait nfsroot=192.168.1.1:/srv/nfs/hosts/goflex-263BA8/,rsize=32768,wsize=32768,hard,intr,udp,v3 ip=192.168.1.14:192.168.1.1:192.168.1.254:255.255.255.0:dockstar:eth0:off mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) # cat /etc/fw_env.config # Configuration file for fw_(printenv/saveenv) utility. # Up to two entries are valid; in this case the redundant # environment sector is assumed present. # Note that "Number of sectors" is ignored on NOR. # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd0 0xc0000 0x20000 0x20000
# cat /etc/debian_version 9.9 # uname -a Linux dockstar 4.9.0-9-marvell #1 Debian 4.9.168-1 (2019-04-12) armv5tel GNU/Linux # cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "u-boot" mtd1: 00400000 00020000 "uImage" mtd2: 02000000 00020000 "rootfs" mtd3: 0db00000 00020000 "data" # dmesg | grep -e mtd -e boot -e 0x000 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nfs rw rootfstype=nfs rootwait nfsroot=192.168.1.1:/srv/nfs/hosts/goflex-263BA8/,rsize=32768,wsize=32768,hard,intr,udp,v3 ip=192.168.1.14:192.168.1.1:192.168.1.254:255.255.255.0:dockstar:eth0:off mtdparts=orion_nand:1M(u-boo ),4M(uImage),32M(rootfs),-(data) [ 1.914595] 0x000000000000-0x000000100000 : "u-boot" [ 1.920794] 0x000000100000-0x000000500000 : "uImage" [ 1.926926] 0x000000500000-0x000002500000 : "rootfs" [ 1.933162] 0x000002500000-0x000010000000 : "data" # ls -l /dev/mtd* crw------- 1 root root 90, 0 2019-08-03 18:30 /dev/mtd0 crw------- 1 root root 90, 1 2019-08-03 18:30 /dev/mtd0ro crw------- 1 root root 90, 2 2019-08-03 18:30 /dev/mtd1 crw------- 1 root root 90, 3 2019-08-03 18:30 /dev/mtd1ro crw------- 1 root root 90, 4 2019-08-03 18:30 /dev/mtd2 crw------- 1 root root 90, 5 2019-08-03 18:30 /dev/mtd2ro crw------- 1 root root 90, 6 2019-08-03 18:30 /dev/mtd3 crw------- 1 root root 90, 7 2019-08-03 18:30 /dev/mtd3ro brw-rw---- 1 root disk 31, 0 2019-08-03 18:30 /dev/mtdblock0 brw-rw---- 1 root disk 31, 1 2019-08-03 18:30 /dev/mtdblock1 brw-rw---- 1 root disk 31, 2 2019-08-03 18:30 /dev/mtdblock2 brw-rw---- 1 root disk 31, 3 2019-08-03 18:30 /dev/mtdblock3 # fw_setenv test 1 # fw_printenv | grep test= test=1 #
# cat /etc/debian_version 10.0 # uname -a Linux goflexnet 4.19.0-5-marvell #1 Debian 4.19.37-5 (2019-06-19) armv5tel GNU/Linux # cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "u-boot" mtd1: 00400000 00020000 "uImage" mtd2: 02000000 00020000 "pogoplug" mtd3: 0d800000 00020000 "root" # dmesg | grep -e mtd -e boot -e 0x000 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nfs rw rootfstype=nfs rootwait nfsroot=192.168.1.1:/srv/nfs/hosts/goflex-263BA8/,rsize=32768,wsize=32768,hard,intr,udp,v3 ip=192.168.1.14:192.168.1.1:192.168.1.254:255.255.255.0:dockstar:eth0:off mtdparts=orion_nand:1M(u-boo ),4M(uImage),32M(rootfs),-(data) [ 20.049178] 0x000000000000-0x000000100000 : "u-boot" [ 20.070147] 0x000000100000-0x000000500000 : "uImage" [ 20.104547] 0x000000500000-0x000002500000 : "pogoplug" [ 20.138798] 0x000002500000-0x00000fd00000 : "root" # ls -l /dev/mtd* crw------- 1 root root 90, 0 2019-08-03 16:10 /dev/mtd0 crw------- 1 root root 90, 1 2019-08-03 16:10 /dev/mtd0ro crw------- 1 root root 90, 2 2019-08-03 16:10 /dev/mtd1 crw------- 1 root root 90, 3 2019-08-03 16:10 /dev/mtd1ro crw------- 1 root root 90, 4 2019-08-03 16:10 /dev/mtd2 crw------- 1 root root 90, 5 2019-08-03 16:10 /dev/mtd2ro crw------- 1 root root 90, 6 2019-08-03 16:10 /dev/mtd3 crw------- 1 root root 90, 7 2019-08-03 16:10 /dev/mtd3ro # fw_setenv test 2 Can't open /dev/mtd0: Permission denied Error: can't write fw_env to flash # fw_printenv | grep test= test=1 #
Re: Can't write uboot env after upgrade to Debian Buster August 04, 2019 12:41AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Can't write uboot env after upgrade to Debian Buster August 04, 2019 02:41AM |
Registered: 13 years ago Posts: 26 |
Re: Can't write uboot env after upgrade to Debian Buster August 04, 2019 05:04AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Can't write uboot env after upgrade to Debian Buster August 04, 2019 07:43AM |
Registered: 5 years ago Posts: 255 |
partition@0 { label = "u-boot"; reg = <0x0000000 0x100000>; read-only; };
Re: Can't write uboot env after upgrade to Debian Buster August 04, 2019 08:27AM |
Admin Registered: 13 years ago Posts: 18,821 |
> partition@0 { > label = "u-boot"; > reg = <0x0000000 0x100000>; > read-only; > }; >>
Re: Can't write uboot env after upgrade to Debian Buster August 04, 2019 09:27AM |
Registered: 5 years ago Posts: 255 |
~# cd /boot /boot# grep -i parts config-4.19.0-5-armmp # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AFS_PARTS is not set CONFIG_MTD_OF_PARTS=m CONFIG_MTD_AR7_PARTS=m
Re: Can't write uboot env after upgrade to Debian Buster August 04, 2019 09:48AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Can't write uboot env after upgrade to Debian Buster August 04, 2019 10:10AM |
Registered: 5 years ago Posts: 255 |
Re: Can't write uboot env after upgrade to Debian Buster August 04, 2019 01:15PM |
Admin Registered: 13 years ago Posts: 18,821 |
# uname -a Linux dockstar 4.9.0-9-marvell #1 Debian 4.9.168-1 (2019-04-12) armv5tel GNU/Linux # cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "u-boot" mtd1: 00400000 00020000 "uImage" mtd2: 02000000 00020000 "rootfs" mtd3: 0db00000 00020000 "data"
Re: Can't write uboot env after upgrade to Debian Buster August 04, 2019 04:45PM |
Registered: 13 years ago Posts: 26 |
/usr/lib/linux-image-${LINUXVER}/kirkwood-dockstar.dtb or /usr/lib/linux-image-${LINUXVER}/kirkwood-goflexnet.dtb
# grep -i parts goflex-263BA8.debian9/boot/config* # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set CONFIG_MTD_OF_PARTS=y CONFIG_MTD_AR7_PARTS=m
# grep -i parts goflex-263BA8.debian10/boot/config* # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=m # CONFIG_MTD_AFS_PARTS is not set CONFIG_MTD_OF_PARTS=m CONFIG_MTD_AR7_PARTS=m
> partition@0 { > label = "u-boot"; > reg = <0x0000000 0x100000>; > read-only; > };I fetched the debian kernel source for Stretch (linux-source-4.9_4.9.168-1+deb9u4_all.deb) & Buster (linux-source-4.19_4.19.37-5+deb10u1_all.deb), the goflexnet partition definition is the same in both and matches the one you provided from Linus' github.
# uname -a Linux goflexnet 4.19.0-5-marvell #1 Debian 4.19.37-5 (2019-06-19) armv5tel GNU/Linux # md5sum /usr/lib/linux-image-4.19.0-5-marvell/kirkwood-goflexnet.dtb c665de1049fc547761e2466c94c31701 /usr/lib/linux-image-4.19.0-5-marvell/kirkwood-goflexnet.dtb # md5sum /boot/dts/kirkwood-goflexnet.dtb c665de1049fc547761e2466c94c31701 /boot/dts/kirkwood-goflexnet.dtb # dmesg | grep -ie mtd -e 0x000 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nfs rw rootfstype=nfs rootwait nfsroot=192.168.1.1:/srv/nfs/hosts/goflex-263BA8/,rsize=32768,wsize=32768,hard,intr,udp,v3 ip=192.168.1.14:192.168.1.1:192.168.1.254:255.255.255.0:dockstar:eth0:off mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) [ 20.346396] 4 fixed-partitions partitions found on MTD device orion_nand [ 20.353177] Creating 4 MTD partitions on "orion_nand": [ 20.383129] 0x000000000000-0x000000100000 : "u-boot" [ 20.395002] 0x000000100000-0x000000500000 : "uImage" [ 20.402591] 0x000000500000-0x000002500000 : "pogoplug" [ 20.412498] 0x000002500000-0x00000fd00000 : "root" # fw_setenv test 2 Can't open /dev/mtd0: Permission denied Error: can't write fw_env to flash # fw_printenv | grep test= test=1
# uname -a Linux goflexnet 4.19.0-5-marvell #1 Debian 4.19.37-5 (2019-06-19) armv5tel GNU/Linux # md5sum /root/bodhi/dts/kirkwood-goflexnet.dtb 4921e765a003be6a0d104138f18c3484 bodhi/dts/kirkwood-goflexnet.dtb # md5sum /boot/dts/kirkwood-goflexnet.dtb 4921e765a003be6a0d104138f18c3484 /boot/dts/kirkwood-goflexnet.dtb # dmesg | grep -ie mtd -e 0x000 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nfs rw rootfstype=nfs rootwait nfsroot=192.168.1.1:/srv/nfs/hosts/goflex-263BA8/,rsize=32768,wsize=32768,hard,intr,udp,v3 ip=192.168.1.14:192.168.1.1:192.168.1.254:255.255.255.0:dockstar:eth0:off mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) [ 19.838046] 4 fixed-partitions partitions found on MTD device orion_nand [ 19.844822] Creating 4 MTD partitions on "orion_nand": [ 19.867901] 0x000000000000-0x000000100000 : "u-boot" [ 19.886798] 0x000000100000-0x000000500000 : "uImage" [ 19.899049] 0x000000500000-0x000002500000 : "pogoplug" [ 19.917017] 0x000002500000-0x00000fd00000 : "root" # fw_setenv test 2 # fw_printenv | grep test= test=2
# diff goflex-263BA8.deb9/boot/config-4.9.0-9-marvell goflex-263BA8.deb10/boot/config-4.19.0-5-marvell | grep -i mtd < CONFIG_MTD=y > CONFIG_MTD=m < CONFIG_MTD_CMDLINE_PARTS=y > CONFIG_MTD_CMDLINE_PARTS=m < CONFIG_MTD_OF_PARTS=y > CONFIG_MTD_OF_PARTS=m < CONFIG_MTD_BLKDEVS=y < CONFIG_MTD_BLOCK=y > CONFIG_MTD_BLKDEVS=m > CONFIG_MTD_BLOCK=m > CONFIG_MTD_BLOCK_RO=m < CONFIG_MTD_CFI=y < CONFIG_MTD_JEDECPROBE=y < CONFIG_MTD_GEN_PROBE=y > CONFIG_MTD_CFI=m > CONFIG_MTD_JEDECPROBE=m > CONFIG_MTD_GEN_PROBE=m < CONFIG_MTD_CFI_INTELEXT=y < CONFIG_MTD_CFI_AMDSTD=y > CONFIG_MTD_CFI_INTELEXT=m > CONFIG_MTD_CFI_AMDSTD=m < CONFIG_MTD_CFI_UTIL=y > CONFIG_MTD_CFI_UTIL=m < CONFIG_MTD_PHYSMAP=y > CONFIG_MTD_PHYSMAP=m < CONFIG_MTD_PHYSMAP_OF=y > CONFIG_MTD_PHYSMAP_OF=m > # CONFIG_MTD_MCHP23K256 is not set < CONFIG_MTD_NAND_ECC=y > # CONFIG_MTD_ONENAND is not set > CONFIG_MTD_NAND_ECC=m < CONFIG_MTD_NAND=y < CONFIG_MTD_NAND_BCH=y > CONFIG_MTD_NAND=m > CONFIG_MTD_NAND_BCH=m < # CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set < CONFIG_MTD_NAND_IDS=y < # CONFIG_MTD_NAND_PXA3xx is not set > # CONFIG_MTD_NAND_MARVELL is not set < CONFIG_MTD_NAND_ORION=y < # CONFIG_MTD_NAND_HISI504 is not set < # CONFIG_MTD_NAND_MTK is not set < # CONFIG_MTD_ONENAND is not set > CONFIG_MTD_NAND_ORION=m > # CONFIG_MTD_SPI_NAND is not set > CONFIG_SFC_MTD=y > CONFIG_SFC_FALCON_MTD=y < CONFIG_SFC_MTD=y
Re: Can't write uboot env after upgrade to Debian Buster August 04, 2019 05:52PM |
Registered: 5 years ago Posts: 255 |
Re: Can't write uboot env after upgrade to Debian Buster August 05, 2019 12:33AM |
Registered: 13 years ago Posts: 26 |
# lsmod | grep mtd mtd 44525 9 nand_bch,ofpart,nand,cmdlinepart,orion_nand # cat /etc/modules # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. # cat /etc/modules-load.d/modules.conf # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. # find /usr/lib/modules/4.19.0-5-marvell/ | grep mtd /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/ubi /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/ubi/ubi.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/ar7part.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/lpddr /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/lpddr/qinfo_probe.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/lpddr/lpddr_cmds.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/mtdblock_ro.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/chips /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/chips/cfi_cmdset_0001.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/chips/cfi_cmdset_0002.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/chips/gen_probe.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/chips/cfi_util.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/chips/cfi_cmdset_0020.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/chips/cfi_probe.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/chips/chipreg.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/chips/jedec_probe.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/ftl.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/mtd.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/ofpart.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/devices /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/devices/sst25l.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/devices/m25p80.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/devices/mtd_dataflash.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/nand /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/nand/raw /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/nand/raw/nandsim.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/nand/raw/nand_bch.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/nand/raw/nand.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/nand/raw/r852.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/nand/raw/sm_common.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/nand/raw/orion_nand.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/nand/raw/nand_ecc.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/mtdswap.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/spi-nor /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/spi-nor/spi-nor.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/maps /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/maps/physmap_of.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/maps/physmap.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/mtdblock.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/cmdlinepart.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/mtd_blkdevs.ko /usr/lib/modules/4.19.0-5-marvell/kernel/drivers/mtd/nftl.ko
Re: Can't write uboot env after upgrade to Debian Buster August 05, 2019 12:39AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Can't write uboot env after upgrade to Debian Buster August 05, 2019 12:43AM |
Admin Registered: 13 years ago Posts: 18,821 |
> # cat /etc/modules > # /etc/modules: kernel modules to load at boot > time. > # nand cmdlinepart orion_nand
Re: Can't write uboot env after upgrade to Debian Buster August 05, 2019 03:45AM |
Registered: 13 years ago Posts: 26 |
# cat /etc/modules # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. nand cmdlinepart orion_nand nand_bch ofpart # update-initramfs -u update-initramfs: Generating /boot/initrd.img-4.19.0-5-marvell #cd /boot # LINUXVER=$(basename /boot/vm* | head -n 1| sed 's/[\/a-z]*-//') && echo $LINUXVER 4.19.0-5-marvell #mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-${LINUXVER} -d /boot/initrd.img-${LINUXVER} /boot/uInitrd Image Name: initramfs-4.19.0-5-marvell Created: Mon Aug 5 08:28:09 2019 Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 14738344 Bytes = 14392.91 KiB = 14.06 MiB Load Address: 00000000 Entry Point: 00000000 # reboot # dmesg | grep -ie mtd -e 0x000 -ie nand -ie orion [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nfs rw rootfstype=nfs rootwait nfsroot=192.168.1.1:/srv/nfs/hosts/goflex-263BA8/,rsize=32768,wsize=32768,hard,intr,udp,v3 i p=192.168.1.14:192.168.1.1:192.168.1.254:255.255.255.0:dockstar:eth0:off mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.021114] clocksource: Switched to clocksource orion_clocksource [ 2.488165] libphy: orion_mdio_bus: probed [ 2.732101] ehci-orion: EHCI orion driver [ 2.751887] orion-ehci f1050000.ehci: EHCI Host Controller [ 2.757519] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 2.767642] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 2.789133] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 23.564249] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 23.570678] nand: Micron MT29F2G08AAD [ 23.574374] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 24.813065] 4 fixed-partitions partitions found on MTD device orion_nand [ 24.819845] Creating 4 MTD partitions on "orion_nand": [ 24.849181] 0x000000000000-0x000000100000 : "u-boot" [ 24.869418] 0x000000100000-0x000000500000 : "uImage" [ 24.885597] 0x000000500000-0x000002500000 : "pogoplug" [ 24.901599] 0x000002500000-0x00000fd00000 : "root" [ 26.228906] orion_wdt: Initial timeout 21 sec # fw_setenv test 2 Can't open /dev/mtd0: Permission denied Error: can't write fw_env to flash
Re: Can't write uboot env after upgrade to Debian Buster August 05, 2019 11:41AM |
Registered: 5 years ago Posts: 255 |
Re: Can't write uboot env after upgrade to Debian Buster August 05, 2019 12:09PM |
Registered: 13 years ago Posts: 26 |
setenv mtdparts 'cmdlinepart.mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)'
setenv mtdparts 'mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)'
# dmesg | grep -ie mtd -e 0x000 -ie nand -ie orion [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nfs rw rootfs type=nfs rootwait nfsroot=172.20.20.1:/srv/nfs/hosts/goflex-263BA8/,rsize=32768, wsize=32768,hard,intr,udp,v3 ip=172.20.20.14:172.20.20.1:172.20.20.254:255.255.2 55.0:dockstar:eth0:off cmdlinepart.mtdparts=orion_nand:1M(u-boot),4M(uImage),32M (rootfs),-(data) [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xff ffffff, max_idle_ns: 9556302233 ns [ 0.021131] clocksource: Switched to clocksource orion_clocksource [ 2.476246] libphy: orion_mdio_bus: probed [ 2.717748] ehci-orion: EHCI orion driver [ 2.730525] orion-ehci f1050000.ehci: EHCI Host Controller [ 2.742342] orion-ehci f1050000.ehci: new USB bus registered, assigned bus nu mber 1 [ 2.762963] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 2.785154] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 16.474003] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 16.480422] nand: Micron MT29F2G08AAD [ 16.484124] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 64 [ 17.613657] 4 cmdlinepart partitions found on MTD device orion_nand [ 17.620072] Creating 4 MTD partitions on "orion_nand": [ 17.637206] 0x000000000000-0x000000100000 : "u-boot" [ 17.718203] 0x000000100000-0x000000500000 : "uImage" [ 17.729629] 0x000000500000-0x000002500000 : "rootfs" [ 17.753268] 0x000002500000-0x000010000000 : "data" [ 19.173492] orion_wdt: Initial timeout 21 sec # fw_setenv test 3 # fw_printenv | grep test= test=3
Re: Can't write uboot env after upgrade to Debian Buster August 05, 2019 01:32PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Can't write uboot env after upgrade to Debian Buster August 05, 2019 01:40PM |
Registered: 13 years ago Posts: 26 |
It is indeed the same bug and the proposed workaround works fine. Still, I think that the choice of compiling the corresponding driver as a module instead of embedding it in the kernel is a decision that will impact many users when they upgrade their plug device from Debian Stretch to Buster. Most of them are bound to meet the same issue. Any chance this choice would be reconsidered? Le lun. 5 août 2019 à 18:42, Ben Hutchings <ben@decadent.org.uk> a écrit : > > This appears to be the same as bug #931852, where you will find a > workaround: https://bugs.debian.org/931852. > > Ben. > > -- > Ben Hutchings > Beware of programmers who carry screwdrivers. - Leonard Brandwein
rhemberger
Re: SOLVED: Can't write uboot env after upgrade to Debian Buster August 12, 2019 01:51PM |