pogoplus 02

hello all...
i have a pogoplus E02 which i used to run archlinux arm on it...long ago...i think flashed jeff uboot at that time and used to run arch linux...

now i want to use pogoplus e02 but i cant ssh into it...how can i ssh into it....please can anyone point me to the complete guide..Thanks

I cannot help you with Arch. However, you can boot Debian with Jeff 's u-boot.

Use a USB flash drive, install the rootfs Debian-6.5.7-kirkwood-tld-1-rootfs-bodhi.tar.bz2 from the release thread.

https://forum.doozan.com/read.php?2,12096

And try booting with it.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> I cannot help you with Arch. However, you can boot
> Debian with Jeff 's u-boot.
>
> Use a USB flash drive, install the rootfs
> Debian-6.5.7-kirkwood-tld-1-rootfs-bodhi.tar.bz2
> from the release thread.
>
> https://forum.doozan.com/read.php?2,12096
>
> And try booting with it.


yeah bro I know I cannot install arch now as it is no longer available..I managed to ssh into pogoplu..here is my file system...pls guide me how to go about it

Pogoplug:/$ ls -l
drwxr-xr-x    2 root     root            0 Nov  4  2009 bin
drwxr-xr-x    5 root     root            0 Feb 26  2008 dev
drwxr-xr-x    5 root     root            0 Mar 17  2013 etc
drwxr-xr-x    2 root     root            0 Nov  4  2009 lib
lrwxrwxrwx    1 root     root           11 Nov  4  2009 linuxrc -> bin/busybox
drwxr-xr-x    2 root     root            0 Dec 18  2008 mnt
dr-xr-xr-x   39 root     root            0 Jan  1  1970 proc
drwxr-xr-x    2 root     root            0 Mar 17  2013 root
drwxr-xr-x    2 root     root            0 Nov  4  2009 sbin
drwxr-xr-x   10 root     root            0 Jan  1  1970 sys
drwxrwxrwt    3 root     root           80 Jan  1 00:01 tmp
-rw-r--r--    1 root     root       524288 Mar 17  2013 uboot-original-mtd0.kwb
drwxr-xr-x    7 root     root            0 Apr  9  2012 usr
lrwxrwxrwx    1 root     root            8 Nov  4  2009 var -> /tmp/var

Edited 1 time(s). Last edit at 02/09/2024 08:26AM by gov.

<hi @bodhi >

<bro I haven't done anything yet but Pogoplug E02 does not show any pen drive attached to it..I tried front port and back port and 2 pen drives..one new one with usb 3 and one old one .o usb..both sandsisk ones.....I tried this command in terminal dmesg..with following output>

Pogoplug:~$ dmesg
[    0.000000] Linux version 2.6.22.18 (bdietrich@buildman) (gcc version 4.2.1) #81 Tue Oct 19 16:05:00 PDT 2010
[    0.000000] CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053177
[    0.000000] Machine: Feroceon-KW
[    0.000000] Using UBoot passing parameters structure
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65536
[    0.000000]   DMA zone: 512 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 65024 pages, LIFO batch:15
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000] CPU0: D VIVT write-back cache
[    0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
[    0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
[    0.000000] Built 1 zonelists.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 ro
[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.010000] Memory: 256MB 0MB 0MB 0MB = 256MB total
[    0.010000] Memory: 255872KB available (3592K code, 253K data, 124K init)
[    0.010000] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)
[    0.250000] Mount-cache hash table entries: 512
[    0.250000] CPU: Testing write buffer coherency: ok
[    0.250000] NET: Registered protocol family 16
[    0.250000] 
[    0.250000] CPU Interface
[    0.250000] -------------
[    0.250000] SDRAM_CS0 ....base 00000000, size 256MB 
[    0.250000] SDRAM_CS1 ....disable
[    0.250000] SDRAM_CS2 ....disable
[    0.250000] SDRAM_CS3 ....disable
[    0.250000] PEX0_MEM ....base e8000000, size 128MB 
[    0.250000] PEX0_IO ....base f2000000, size   1MB 
[    0.250000] INTER_REGS ....base f1000000, size   1MB 
[    0.250000] NFLASH_CS ....base fa000000, size   2MB 
[    0.250000] SPI_CS ....base f4000000, size  16MB 
[    0.250000] BOOT_ROM_CS ....no such
[    0.250000] DEV_BOOTCS ....no such
[    0.250000] CRYPT_ENG ....base f0000000, size   2MB 
[    0.250000] 
[    0.250000]   Marvell Development Board (LSP Version KW_LSP_4.2.7_patch21_with_rx_desc_tuned)-- SHEEVA PLUG  Soc: 88F6281 A0 LE
[    0.250000] 
[    0.250000]  Detected Tclk 200000000 and SysClk 400000000 
[    0.250000] MV Buttons Device Load
[    0.250000] Marvell USB EHCI Host controller #0: c0652600
[    0.750000] PEX0 interface detected no Link.
[    0.750000] PCI: bus0: Fast back to back transfers enabled
[    0.750000] SCSI subsystem initialized
[    0.750000] usbcore: registered new interface driver usbfs
[    0.750000] usbcore: registered new interface driver hub
[    0.750000] usbcore: registered new device driver usb
[    0.750000] NET: Registered protocol family 2
[    0.760000] Time: kw_clocksource clocksource has been installed.
[    0.850000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.850000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.850000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.850000] TCP: Hash tables configured (established 8192 bind 8192)
[    0.850000] TCP reno registered
[    0.880000] RTC has been updated!!!
[    0.880000] RTC registered
[    0.880000] Use the XOR engines (acceleration) for enhancing the following functions:
[    0.880000]   o RAID 5 Xor calculation
[    0.880000]   o kernel memcpy
[    0.880000]   o kenrel memzero
[    0.880000] Number of XOR engines to use: 4
[    0.880000] cesadev_init(c00117b0)
[    0.880000] mvCesaInit: sessions=640, queue=64, pSram=f0000000
[    0.880000] MV Buttons Driver Load
[    0.880000] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[    0.880000] squashfs: LZMA suppport for slax.org by jro
[    0.880000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.880000] io scheduler noop registered
[    0.880000] io scheduler anticipatory registered (default)
[    0.900000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[    0.900000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[    0.910000] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
[    0.920000] Loading Marvell Ethernet Driver:
[    0.920000]   o Cached descriptors in DRAM
[    0.920000]   o DRAM SW cache-coherency
[    0.930000]   o Single RX Queue support - ETH_DEF_RXQ=0
[    0.930000]   o Single TX Queue support - ETH_DEF_TXQ=0
[    0.940000]   o TCP segmentation offload enabled
[    0.940000]   o Receive checksum offload enabled
[    0.950000]   o Transmit checksum offload enabled
[    0.950000]   o Network Fast Processing (Routing) supported
[    0.960000]   o Driver ERROR statistics enabled
[    0.960000]   o Driver INFO statistics enabled
[    0.970000]   o Proc tool API enabled
[    0.970000]   o Rx descripors: q0=128
[    0.970000]   o Tx descripors: q0=532
[    0.980000]   o Loading network interface(s):
[    0.990000]     o eth0, ifindex = 1, GbE port = 0
[    0.990000]     o eth1, ifindex = 2, GbE port = 1
[    1.000000] 
[    1.000000] mvFpRuleDb (cfdf6000): 2048 entries, 8192 bytes
[    1.000000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[    1.010000] Copyright (c) 1999-2006 Intel Corporation.
[    1.020000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[    1.020000] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.030000] 
[    1.030000] Warning Sata is Powered Off
[    1.030000] NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
[    1.040000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
[    1.050000] Scanning device for bad blocks
[    1.100000] Using static partition definition
[    1.110000] Creating 4 MTD partitions on "nand_mtd":
[    1.110000] 0x00000000-0x00100000 : "u-boot"
[    1.120000] 0x00100000-0x00500000 : "uImage"
[    1.120000] 0x00500000-0x02500000 : "root"
[    1.130000] 0x02500000-0x08000000 : "data"
[    1.130000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
[    1.140000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
[    1.180000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
[    1.200000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    1.200000] usb usb1: configuration #1 chosen from 1 choice
[    1.210000] hub 1-0:1.0: USB hub found
[    1.210000] hub 1-0:1.0: 1 port detected
[    1.330000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.330000] USB Universal Host Controller Interface driver v3.0
[    3.730000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[    3.730000] usbcore: registered new interface driver usblp
[    3.740000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[    3.740000] Initializing USB Mass Storage driver...
[    3.750000] usbcore: registered new interface driver usb-storage
[    3.750000] USB Mass Storage support registered.
[    3.760000] mice: PS/2 mouse device common for all mice
[    3.760000] i2c /dev entries driver
[    3.770000] Linux telephony interface: v1.00
[    3.770000] md: linear personality registered for level -1
[    3.780000] md: raid0 personality registered for level 0
[    3.780000] md: raid1 personality registered for level 1
[    3.960000] raid6: int32x1     97 MB/s
[    4.130000] raid6: int32x2    114 MB/s
[    4.300000] raid6: int32x4    122 MB/s
[    4.470000] raid6: int32x8    110 MB/s
[    4.470000] raid6: using algorithm int32x4 (122 MB/s)
[    4.470000] md: raid6 personality registered for level 6
[    4.480000] md: raid5 personality registered for level 5
[    4.480000] md: raid4 personality registered for level 4
[    4.490000] raid5: measuring checksumming speed
[    4.540000]    arm4regs  :  1083.600 MB/sec
[    4.590000]    8regs     :   754.800 MB/sec
[    4.640000]    32regs    :   900.000 MB/sec
[    4.640000] raid5: using function: arm4regs (1083.600 MB/sec)
[    4.650000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[    4.650000] dm_crypt using the OCF package.
[    4.660000] sdhci: Secure Digital Host Controller Interface driver
[    4.660000] sdhci: Copyright(c) Pierre Ossman
[    7.050000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[    7.050000] usbcore: registered new interface driver usbhid
[    7.060000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    7.060000] TCP cubic registered
[    7.070000] NET: Registered protocol family 1
[    7.070000] NET: Registered protocol family 17
[    7.080000] md: Autodetecting RAID arrays.
[    7.080000] md: autorun ...
[    7.080000] md: ... autorun DONE.
[    8.810000] Empty flash at 0x009ac208 ends at 0x009ac800
[   12.610000] VFS: Mounted root (jffs2 filesystem) readonly.
[   12.620000] Freeing init memory: 124K
[   14.760000] eth0: link down
[   14.760000] eth0: started
[   15.680000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   17.960000] eth0: link up, full duplex, speed 1 Gbps
[   18.110000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   20.540000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   22.980000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   25.450000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   27.860000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   30.290000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   32.730000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   35.170000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   37.610000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   40.050000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   42.480000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   44.920000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   47.360000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   49.800000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   52.230000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   54.670000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   57.110000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   61.990000] printk: 1 messages suppressed.
[   61.990000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   66.860000] printk: 1 messages suppressed.
[   66.860000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   71.740000] printk: 1 messages suppressed.
[   71.740000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   76.610000] printk: 1 messages suppressed.
[   76.610000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   81.490000] printk: 1 messages suppressed.
[   81.490000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   86.360000] printk: 1 messages suppressed.
[   86.360000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   91.240000] printk: 1 messages suppressed.
[   91.240000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[   96.110000] printk: 1 messages suppressed.
[   96.110000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  100.990000] printk: 1 messages suppressed.
[  100.990000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  105.870000] printk: 1 messages suppressed.
[  105.870000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  110.740000] printk: 1 messages suppressed.
[  110.740000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  118.050000] printk: 2 messages suppressed.
[  118.050000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  122.930000] printk: 1 messages suppressed.
[  122.930000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  127.810000] printk: 1 messages suppressed.
[  127.810000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  132.680000] printk: 1 messages suppressed.
[  132.680000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  137.560000] printk: 1 messages suppressed.
[  137.560000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  142.430000] printk: 1 messages suppressed.
[  142.430000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  147.310000] printk: 1 messages suppressed.
[  147.310000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  152.180000] printk: 1 messages suppressed.
[  152.180000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  157.060000] printk: 1 messages suppressed.
[  157.060000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  161.930000] printk: 1 messages suppressed.
[  161.930000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  166.810000] printk: 1 messages suppressed.
[  166.810000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  171.680000] printk: 1 messages suppressed.
[  171.680000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  176.560000] printk: 1 messages suppressed.
[  176.560000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  181.440000] printk: 1 messages suppressed.
[  181.440000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  186.310000] printk: 1 messages suppressed.
[  186.310000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  191.190000] printk: 1 messages suppressed.
[  191.190000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  196.060000] printk: 1 messages suppressed.
[  196.060000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  200.940000] printk: 1 messages suppressed.
[  200.940000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  205.810000] printk: 1 messages suppressed.
[  205.810000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  210.690000] printk: 1 messages suppressed.
[  210.690000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  218.000000] printk: 2 messages suppressed.
[  218.000000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  222.880000] printk: 1 messages suppressed.
[  222.880000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  227.750000] printk: 1 messages suppressed.
[  227.750000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  232.630000] printk: 1 messages suppressed.
[  232.630000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  237.500000] printk: 1 messages suppressed.
[  237.500000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[  242.380000] printk: 1 messages suppressed.
[  242.380000] hub 1-0:1.0: connect-debounce failed, port 1 disabled

<and on and on....>

<Another command df -h gives this output with pen drive attached...>

Pogoplug:~$ df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/mtdblock2           32.0M     17.2M     14.8M  54% /
none                    125.0M      4.0k    125.0M   0% /tmp

<what does this point too...USB port failures??>

<I have tried attaching wd ultra portable usb hdd and its power indicator lights up and seems to be working ok..but Pogoplug as with the pen drives does not detect it..
<df -h or df says the same as mentioned above>

<pls guide me...Thanks>



Edited 3 time(s). Last edit at 02/09/2024 08:27AM by gov.

hello Bodhi ser..

I have flashed new boot image and I don't know how to go forward after this step.

Pogoplug:/tmp$ ./flash_erase /dev/mtd0 0 4
Erasing 128 Kibyte § 60000 -- 100 % complete 
Pogoplug:/tmp$ ./nandwrite /dev/mtd0 uboot.2017.07-tld-1.pogo_e02.mtd0.kwb 
Writing data to block 0 at offset 0x0
Writing data to block 1 at offset 0x20000
Writing data to block 2 at offset 0x40000
Writing data to block 3 at offset 0x60000

Pogoplug:/tmp$ /usr/sbin/flash_erase /dev/mtd0 0xc0000 1
Erase Total 1 Units
Performing Flash Erase of length 131072 at offset 0xc0000 done

Pogoplug:/tmp$ /usr/sbin/nandwrite -s 786432 /dev/mtd0 uboot.2016.05-tld-1.environment.img
Writing data to block 6 at offset 0xc0000

I am no sure how to set ens now...pls guide me..I have not restarted the Pogoplug yet...pogoplug does not detect any usb....
I have imported files through scp command in the /tmp folder...but I know the files will be lost after I reboot....and I can't copy those files either..it says "read only"

++(((((Then for all boxes, restore these 2 envs using the saved envs text in step c (replace xxx with the real saved values))))++

what does these lines mean..?
do I have to change the ethaddr with the same value the Pogoplug had it before?

Pogoplug:/tmp$ ./fw_printenv ethaddr                                                                                                                                                                       
ethaddr=52:xx:xx:xx:11:xx

Pogoplug:/tmp$ ./fw_printenv ethaddr 00:xx:31:xx:xx:xx                  
ethaddr=52:xx:xx:xx11:xx
## Error: "00:xx:31:xx:F2:xx" not defined

if I copy paste the command which u gave and add the ethaddr Pogoplug had it before it gives this error

my ethaddr before in the current_envs.txt is not the ethhaddr which now displays..

pls guide me how to go about it..

Thanks



Edited 5 time(s). Last edit at 02/09/2024 08:28AM by gov.

gov Wrote:
-------------------------------------------------------
> hello Bodhi ser..
>
> I have flashed new boot image and I don't know how
> to go forward after this step.
>
SNIP
> Pogoplug:/tmp$ ./fw_printenv ethaddr
>
>
>
>
> ethaddr=52:xx:xx:xx:11:xx
>
>
> Pogoplug:/tmp$ ./fw_printenv ethaddr 00:xx:31:xx:xx:xx
> ethaddr=52:xx:xx:xx11:xx
> ## Error: "00:xx:31:xx:F2:xx" not defined
>
> if I copy paste the command which u gave and add
> the ethaddr Pogoplug had it before it gives this
> error
>
> my ethaddr before in the current_envs.txt is not
> the ethhaddr which now displays..
>
> pls guide me how to go about it..
>
> Thanks

Your command for setting the address is incorrect. Change:

./fw_printenv ethaddr 00:xx:31:xx:xx:xx

to

 ./fw_setenv ethaddr 00:xx:31:xx:xx:xx

To set the variable. You can then check it by entering:

./fw_printenv ethaddr

Ray

gov Wrote:
-------------------------------------------------------
> hello Bodhi ser..
>
> I have flashed new boot image and I don't know how
> to go forward after this step.
>
> Pogoplug:/tmp$ ./flash_erase /dev/mtd0 0 4
> Erasing 128 Kibyte § 60000 -- 100 % complete
> Pogoplug:/tmp$ ./nandwrite /dev/mtd0
> uboot.2017.07-tld-1.pogo_e02.mtd0.kwb
> Writing data to block 0 at offset 0x0
> Writing data to block 1 at offset 0x20000
> Writing data to block 2 at offset 0x40000
> Writing data to block 3 at offset 0x60000
>
>
> Pogoplug:/tmp$ /usr/sbin/flash_erase /dev/mtd0
> 0xc0000 1
> Erase Total 1 Units
> Performing Flash Erase of length 131072 at offset
> 0xc0000 done
>
> Pogoplug:/tmp$ /usr/sbin/nandwrite -s 786432
> /dev/mtd0 uboot.2016.05-tld-1.environment.img
> Writing data to block 6 at offset 0xc0000
>

The flashing looks good.

> I am no sure how to set ens now...pls guide me..I
> have not restarted the Pogoplug yet...pogoplug
> does not detect any usb....
> I have imported files through scp command in the
> /tmp folder...but I know the files will be lost
> after I reboot....and I can't copy those files
> either..it says "read only"
>
> ++(((((Then for all boxes, restore these 2 envs
> using the saved envs text in step c (replace xxx
> with the real saved values))))++
>
> what does these lines mean..?
> do I have to change the ethaddr with the same
> value the Pogoplug had it before?

Yes. That's preferable.

But the box still would boot ok with the temporary MAC adress in the defaul envs image that you've just flashed.

>
> Pogoplug:/tmp$ ./fw_printenv ethaddr
>
>
>
>
> ethaddr=52:xx:xx:xx:11:xx
>
>
> Pogoplug:/tmp$ ./fw_printenv ethaddr
> 00:xx:31:xx:xx:xx
> ethaddr=52:xx:xx:xx11:xx
> ## Error: "00:xx:31:xx:F2:xx" not defined
>
> if I copy paste the command which u gave and add
> the ethaddr Pogoplug had it before it gives this
> error
>
> my ethaddr before in the current_envs.txt is not
> the ethhaddr which now displays..


At this point, you can boot with the new USB rootfs.


>
> pls guide me how to go about it..
>
> Thanks

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

rayknight Wrote:

> Your command for setting the address is incorrect.
> Change:
>

> ./fw_printenv ethaddr 00:xx:31:xx:xx:xx
>

> to
>

>  ./fw_setenv ethaddr 00:xx:31:xx:xx:xx
>

>
> To set the variable. You can then check it by
> entering:
>

> ./fw_printenv ethaddr
>

>
> Ray

yeah bro i figured that out...but as said it before my pogoplug was not detecting any usb drives the pogoplug is now failing to reboot..i did everything correctly..wait i am going to my paste the netconsole message here



Edited 1 time(s). Last edit at 02/08/2024 10:48AM by gov.

>
> At this point, you can boot with the new USB
> rootfs.
>
>
> >
> > pls guide me how to go about it..
> >
> > Thanks

bodhi ser i did everything write...took some time to read all the post u gave it in wiki thread...but as i was saying that dmesg on pogoplug isn't detecting any usb drives..i made a rootfs dribe drom debian exactly as u have mentioned in wiki thread..but the pogoplug light now turns orange after initiallly being green on startup...and it isn't booting now even without usb to the stock os..here is the netconsole messages..

U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700)
Pogo E02
gcc (Debian 6.3.0-18) 6.3.0 20170516
GNU ld (GNU Binutils for Debian) 2.28
Hit any key to stop autoboot:  0 
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... cannot reset port 1!?
1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Unknown command 'ide' - try 'help'
Unknown command 'mmc' - try 'help'
loading envs from usb 0 ...
** Bad device usb 0 **
loading envs from usb 1 ...
** Bad device usb 1 **
loading envs from usb 2 ...
** Bad device usb 2 **
loading envs from usb 3 ...
** Bad device usb 3 **
loading envs from ide 0 ...
** Bad device ide 0 **
loading envs from ide 1 ...
** Bad device ide 1 **
loading envs from ide 2 ...
** Bad device ide 2 **
loading envs from ide 3 ...
** Bad device ide 3 **
loading envs from mmc 0 ...
** Bad device mmc 0 **
loading envs from mmc 1 ...
** Bad device mmc 1 **
loading envs from mmc 2 ...
** Bad device mmc 2 **
loading envs from mmc 3 ...
** Bad device mmc 3 **
running scan_disk ...
Scan device usb
device usb 0:1
** Bad device usb 0 **
device usb 1:1
** Bad device usb 1 **
device usb 2:1
** Bad device usb 2 **
device usb 3:1
** Bad device usb 3 **
Scan device ide
Unknown command 'ide' - try 'help'
device ide 0:1
** Bad device ide 0 **
device ide 1:1
** Bad device ide 1 **
device ide 2:1
** Bad device ide 2 **
device ide 3:1
** Bad device ide 3 **
Scan device mmc
Unknown command 'mmc' - try 'help'
device mmc 0:1
** Bad device mmc 0 **
device mmc 1:1
** Bad device mmc 1 **
device mmc 2:1
** Bad device mmc 2 **
device mmc 3:1
** Bad device mmc 3 **
loading uImage ...
** Bad device usb 0 **
loading uInitrd ...
** Bad device usb 0 **
loading DTB /boot/dts/kirkwood-pogo_e02.dtb ...
** Bad device usb 0 **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
PogoE02>

what to do now....how to get it working..i thought i will run pihole on it..but it gets stucked there only..light turns from green to orange



Edited 2 time(s). Last edit at 02/09/2024 08:28AM by gov.

here is the printenv from netconsole terminal window..

PogoE02> printenv
printenv
arcNumber=2097
bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi; sleep 3
bootdelay=10
bootdev=usb
device=0:1
device_type=mmc
devices=usb ide mmc
disk_number=3
disks=0 1 2 3
dtb_file=/boot/dts/kirkwood-pogo_e02.dtb
ethact=egiga0
ethaddr=00:25:31:02:F2:79
if_netconsole=ping $serverip
init_ide=ide reset
init_mmc=mmc rescan
init_usb=usb start
ipaddr=192.168.1.2
led_error=orange blinking
led_exit=green off
led_init=green blinking
load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file
load_dtb_addr=0x1c00000
load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd
load_initrd_addr=0x1100000
load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage
load_uimage_addr=0x800000
machid=0x831
mainlineLinux=yes
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
ncip=192.168.1.7
partition=nand0,2
preboot=run if_netconsole start_netconsole
preboot_nc=run if_netconsole start_netconsole
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start";  setenv scan_ide "ide reset";  setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
scan_ide=ide reset
scan_mmc=mmc rescan
scan_usb=usb start
serverip=192.168.1.7
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=nc
stdin=nc
stdout=nc
uenv_addr=0x810000
uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize
uenv_init_devices=setenv init_usb "usb start";  setenv init_ide "ide reset";  setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in $disks; do if test $uenv_loaded -eq 0; then setenv device_type $devtype; setenv disk_number $disknum; run uenv_read; fi; done; done;
uenv_loaded=0
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read;  fi; else if $devtype part $disknum; then run uenv_read; fi;  fi
usb_ready_retry=15

Edited 5 time(s). Last edit at 02/09/2024 08:32AM by gov.

Everything else looks good. But the USB drive is not detected.

U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700) 
Pogo E02 
gcc (Debian 6.3.0-18) 6.3.0 20170516 
GNU ld (GNU Binutils for Debian) 2.28 
Hit any key to stop autoboot: 0 
starting USB... 
USB0: USB EHCI 1.00 
scanning bus 0 for devices... cannot reset port 1!? 
1 USB Device(s) found 
scanning usb for storage devices... 0 Storage Device(s) found

So you need to try all 3 USB ports, to see if the problem is with the port or the USB flash drive itself. If the behavior is the same for each port, then try using a different USB flash drive.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

yeah i did try all ports and with different usb stick too..one is sandisk cruzer blade and the other is from kingston....

i earlier before flashing new uboot tried "dmesg" and it did not show any usb drives.....

but now pogoplug do not goes back stock os even with no usb plugged....

not a big deal though....but can u tell me any other way to get the usb ports working or anyother way to get the pogoplug working....

bodhi ser...thanks for replying to my noob question though. :-)

linux is fun though..will learn it..

:-)

i did post it here though in this thread usb ports not being detecting any pen drives....

here is my post and results the commands threw before upadting u-boot------

Pogoplug:~$ dmesg
[ 0.000000] Linux version 2.6.22.18 (bdietrich@buildman) (gcc version 4.2.1) #81 Tue Oct 19 16:05:00 PDT 2010
[ 0.000000] CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053177
[ 0.000000] Machine: Feroceon-KW
[ 0.000000] Using UBoot passing parameters structure
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65024 pages, LIFO batch:15
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] CPU0: D VIVT write-back cache
[ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
[ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
[ 0.000000] Built 1 zonelists. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 ro
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.010000] Memory: 256MB 0MB 0MB 0MB = 256MB total
[ 0.010000] Memory: 255872KB available (3592K code, 253K data, 124K init)
[ 0.010000] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)
[ 0.250000] Mount-cache hash table entries: 512
[ 0.250000] CPU: Testing write buffer coherency: ok
[ 0.250000] NET: Registered protocol family 16
[ 0.250000]
[ 0.250000] CPU Interface
[ 0.250000] -------------
[ 0.250000] SDRAM_CS0 ....base 00000000, size 256MB
[ 0.250000] SDRAM_CS1 ....disable
[ 0.250000] SDRAM_CS2 ....disable
[ 0.250000] SDRAM_CS3 ....disable
[ 0.250000] PEX0_MEM ....base e8000000, size 128MB
[ 0.250000] PEX0_IO ....base f2000000, size 1MB
[ 0.250000] INTER_REGS ....base f1000000, size 1MB
[ 0.250000] NFLASH_CS ....base fa000000, size 2MB
[ 0.250000] SPI_CS ....base f4000000, size 16MB
[ 0.250000] BOOT_ROM_CS ....no such
[ 0.250000] DEV_BOOTCS ....no such
[ 0.250000] CRYPT_ENG ....base f0000000, size 2MB
[ 0.250000]
[ 0.250000] Marvell Development Board (LSP Version KW_LSP_4.2.7_patch21_with_rx_desc_tuned)-- SHEEVA PLUG Soc: 88F6281 A0 LE
[ 0.250000]
[ 0.250000] Detected Tclk 200000000 and SysClk 400000000
[ 0.250000] MV Buttons Device Load
[ 0.250000] Marvell USB EHCI Host controller #0: c0652600
[ 0.750000] PEX0 interface detected no Link.
[ 0.750000] PCI: bus0: Fast back to back transfers enabled
[ 0.750000] SCSI subsystem initialized
[ 0.750000] usbcore: registered new interface driver usbfs
[ 0.750000] usbcore: registered new interface driver hub
[ 0.750000] usbcore: registered new device driver usb
[ 0.750000] NET: Registered protocol family 2
[ 0.760000] Time: kw_clocksource clocksource has been installed.
[ 0.850000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.850000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.850000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.850000] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.850000] TCP reno registered
[ 0.880000] RTC has been updated!!!
[ 0.880000] RTC registered
[ 0.880000] Use the XOR engines (acceleration) for enhancing the following functions:
[ 0.880000] o RAID 5 Xor calculation
[ 0.880000] o kernel memcpy
[ 0.880000] o kenrel memzero
[ 0.880000] Number of XOR engines to use: 4
[ 0.880000] cesadev_init(c00117b0)
[ 0.880000] mvCesaInit: sessions=640, queue=64, pSram=f0000000
[ 0.880000] MV Buttons Driver Load
[ 0.880000] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 0.880000] squashfs: LZMA suppport for slax.org by jro
[ 0.880000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.880000] io scheduler noop registered
[ 0.880000] io scheduler anticipatory registered (default)
[ 0.900000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 0.900000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 0.910000] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
[ 0.920000] Loading Marvell Ethernet Driver:
[ 0.920000] o Cached descriptors in DRAM
[ 0.920000] o DRAM SW cache-coherency
[ 0.930000] o Single RX Queue support - ETH_DEF_RXQ=0
[ 0.930000] o Single TX Queue support - ETH_DEF_TXQ=0
[ 0.940000] o TCP segmentation offload enabled
[ 0.940000] o Receive checksum offload enabled
[ 0.950000] o Transmit checksum offload enabled
[ 0.950000] o Network Fast Processing (Routing) supported
[ 0.960000] o Driver ERROR statistics enabled
[ 0.960000] o Driver INFO statistics enabled
[ 0.970000] o Proc tool API enabled
[ 0.970000] o Rx descripors: q0=128
[ 0.970000] o Tx descripors: q0=532
[ 0.980000] o Loading network interface(s):
[ 0.990000] o eth0, ifindex = 1, GbE port = 0
[ 0.990000] o eth1, ifindex = 2, GbE port = 1
[ 1.000000]
[ 1.000000] mvFpRuleDb (cfdf6000): 2048 entries, 8192 bytes
[ 1.000000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 1.010000] Copyright (c) 1999-2006 Intel Corporation.
[ 1.020000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[ 1.020000] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.030000]
[ 1.030000] Warning Sata is Powered Off
[ 1.030000] NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
[ 1.040000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
[ 1.050000] Scanning device for bad blocks
[ 1.100000] Using static partition definition
[ 1.110000] Creating 4 MTD partitions on "nand_mtd":
[ 1.110000] 0x00000000-0x00100000 : "u-boot"
[ 1.120000] 0x00100000-0x00500000 : "uImage"
[ 1.120000] 0x00500000-0x02500000 : "root"
[ 1.130000] 0x02500000-0x08000000 : "data"
[ 1.130000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
[ 1.140000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
[ 1.180000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
[ 1.200000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.200000] usb usb1: configuration #1 chosen from 1 choice
[ 1.210000] hub 1-0:1.0: USB hub found
[ 1.210000] hub 1-0:1.0: 1 port detected
[ 1.330000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.330000] USB Universal Host Controller Interface driver v3.0
[ 3.730000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 3.730000] usbcore: registered new interface driver usblp
[ 3.740000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 3.740000] Initializing USB Mass Storage driver...
[ 3.750000] usbcore: registered new interface driver usb-storage
[ 3.750000] USB Mass Storage support registered.
[ 3.760000] mice: PS/2 mouse device common for all mice
[ 3.760000] i2c /dev entries driver
[ 3.770000] Linux telephony interface: v1.00
[ 3.770000] md: linear personality registered for level -1
[ 3.780000] md: raid0 personality registered for level 0
[ 3.780000] md: raid1 personality registered for level 1
[ 3.960000] raid6: int32x1 97 MB/s
[ 4.130000] raid6: int32x2 114 MB/s
[ 4.300000] raid6: int32x4 122 MB/s
[ 4.470000] raid6: int32x8 110 MB/s
[ 4.470000] raid6: using algorithm int32x4 (122 MB/s)
[ 4.470000] md: raid6 personality registered for level 6
[ 4.480000] md: raid5 personality registered for level 5
[ 4.480000] md: raid4 personality registered for level 4
[ 4.490000] raid5: measuring checksumming speed
[ 4.540000] arm4regs : 1083.600 MB/sec
[ 4.590000] 8regs : 754.800 MB/sec
[ 4.640000] 32regs : 900.000 MB/sec
[ 4.640000] raid5: using function: arm4regs (1083.600 MB/sec)
[ 4.650000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 4.650000] dm_crypt using the OCF package.
[ 4.660000] sdhci: Secure Digital Host Controller Interface driver
[ 4.660000] sdhci: Copyright(c) Pierre Ossman
[ 7.050000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 7.050000] usbcore: registered new interface driver usbhid
[ 7.060000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 7.060000] TCP cubic registered
[ 7.070000] NET: Registered protocol family 1
[ 7.070000] NET: Registered protocol family 17
[ 7.080000] md: Autodetecting RAID arrays.
[ 7.080000] md: autorun ...
[ 7.080000] md: ... autorun DONE.
[ 8.810000] Empty flash at 0x009ac208 ends at 0x009ac800
[ 12.610000] VFS: Mounted root (jffs2 filesystem) readonly.
[ 12.620000] Freeing init memory: 124K
[ 14.760000] eth0: link down
[ 14.760000] eth0: started
[ 15.680000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 17.960000] eth0: link up, full duplex, speed 1 Gbps
[ 18.110000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 20.540000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 22.980000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 25.450000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 27.860000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 30.290000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 32.730000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 35.170000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 37.610000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 40.050000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 42.480000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 44.920000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 47.360000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 49.800000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 52.230000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 54.670000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 57.110000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 61.990000] printk: 1 messages suppressed.
[ 61.990000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 66.860000] printk: 1 messages suppressed.
[ 66.860000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 71.740000] printk: 1 messages suppressed.
[ 71.740000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 76.610000] printk: 1 messages suppressed.
[ 76.610000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 81.490000] printk: 1 messages suppressed.
[ 81.490000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 86.360000] printk: 1 messages suppressed.
[ 86.360000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 91.240000] printk: 1 messages suppressed.
[ 91.240000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 96.110000] printk: 1 messages suppressed.
[ 96.110000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 100.990000] printk: 1 messages suppressed.
[ 100.990000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 105.870000] printk: 1 messages suppressed.
[ 105.870000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 110.740000] printk: 1 messages suppressed.
[ 110.740000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 118.050000] printk: 2 messages suppressed.
[ 118.050000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 122.930000] printk: 1 messages suppressed.
[ 122.930000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 127.810000] printk: 1 messages suppressed.
[ 127.810000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 132.680000] printk: 1 messages suppressed.
[ 132.680000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 137.560000] printk: 1 messages suppressed.
[ 137.560000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 142.430000] printk: 1 messages suppressed.
[ 142.430000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 147.310000] printk: 1 messages suppressed.
[ 147.310000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 152.180000] printk: 1 messages suppressed.
[ 152.180000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 157.060000] printk: 1 messages suppressed.
[ 157.060000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 161.930000] printk: 1 messages suppressed.
[ 161.930000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 166.810000] printk: 1 messages suppressed.
[ 166.810000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 171.680000] printk: 1 messages suppressed.
[ 171.680000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 176.560000] printk: 1 messages suppressed.
[ 176.560000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 181.440000] printk: 1 messages suppressed.
[ 181.440000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 186.310000] printk: 1 messages suppressed.
[ 186.310000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 191.190000] printk: 1 messages suppressed.
[ 191.190000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 196.060000] printk: 1 messages suppressed.
[ 196.060000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 200.940000] printk: 1 messages suppressed.
[ 200.940000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 205.810000] printk: 1 messages suppressed.
[ 205.810000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 210.690000] printk: 1 messages suppressed.
[ 210.690000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 218.000000] printk: 2 messages suppressed.
[ 218.000000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 222.880000] printk: 1 messages suppressed.
[ 222.880000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 227.750000] printk: 1 messages suppressed.
[ 227.750000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 232.630000] printk: 1 messages suppressed.
[ 232.630000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 237.500000] printk: 1 messages suppressed.
[ 237.500000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
[ 242.380000] printk: 1 messages suppressed.
[ 242.380000] hub 1-0:1.0: connect-debounce failed, port 1 disabled

<and on and on....>

<Another command df -h gives this output with pen drive attached...>

Pogoplug:~$ df -h
Filesystem Size Used Available Use% Mounted on
/dev/mtdblock2 32.0M 17.2M 14.8M 54% /
none 125.0M 4.0k 125.0M 0% /tmp

what does this point too...USB port failures??
have tried attaching wd ultra portable usb hdd and its power indicator lights up and seems to be working ok..but Pogoplug as with the pen drives does not detect it..
df -h or df says the same as mentioned above[/color]



Edited 9 time(s). Last edit at 02/09/2024 08:41AM by gov.

gov,

> what does this point too...USB port failures??

Yes it looks like a HW problem. Normally, I would recommend checking the power supply first to make sure it is not a power problem. However, this plug has an internal power supply, so even it is removable, you can't do much with another power supply.

If you have a local network with other Linux boxes, you could store the Debian rootfs in one of those box storage and use NFS rootfs. The current u-boot 2017.07 should boot NFS rootfs without problem. See the Wiki thread..

Quote

NFS

NFS - HowTo set up NFS shares (and boot NFS rootfs), see also Debian 12 (bookworm) settings
Boot your Dockstar (and other plugs) using NFS rootfs, see also Debian 12 (bookworm) settings
Increase NFSD max_block_size
Reduce NFS threads

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> gov,
>
> > what does this point too...USB port failures??
>
> Yes it looks like a HW problem. Normally, I would
> recommend checking the power supply first to make
> sure it is not a power problem. However, this plug
> has an internal power supply, so even it is
> removable, you can't do much with another power
> supply.
>
> If you have a local network with other Linux
> boxes, you could store the Debian rootfs in one of
> those box storage and use NFS rootfs. The current
> u-boot 2017.07 should boot NFS rootfs without
> problem. See the
> Wiki
> thread..
>
>

Quote

NFS
>
> NFS - HowTo set up NFS shares (and boot NFS
> rootfs), see also Debian 12 (bookworm) settings
> Boot your Dockstar (and other plugs) using NFS
> rootfs, see also Debian 12 (bookworm) settings
> Increase NFSD max_block_size
> Reduce NFS threads

Thanks ser..will give it a try...