Just now I discovered a very "historical story" situation. I used the dtc tool to dts restore the ox820-pogoplus-classic.dtb and found the description of the NAND segment. But in the ox820-akitio.dtb file, the 'reg' is diffrent... nand-controller@41000000 { compatible = "oxsemi,ox820-nand"; regby Popo - Rescue System
I had already upgrade Linux iSharing 4.14.180-oxnas-tld-1 #1 SMP PREEMPT Wed May 13 02:38:34 PDT 2020 armv6l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyriby Popo - Rescue System
Hi, bodhi: Finally , I boot success to debian rootfs system. But, I must use 'ox820-pogov3-classic.dtb' please see the console log OX820 # printenv dt_bootm=bootm $uimage_addr $uinitrd_addr $dtb_addr autoload=no baudrate=115200 bootargs=console=ttyS0,115200n8 bootcmd=run dt_bootcmd_ide bootdelay=3 console=console=ttyS0,115200n8 dt_bootcmd_ide=ide start; run dt_ide_boby Popo - Rescue System
I change uImage to the original from download file. I use ox820-pogov3-classic.dtb then .... I got confused.. U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** File not found /booby Popo - Rescue System
Hi, bodhi : It seems got better than before. But still stuck.... I use Latest released rootfs: Debian-4.14.180-oxnas-tld-1-rootfs-bodhi.tar.bz2 (17 May 2020) do as following cp -a uImage uImage.orig cp -a zImage-4.14.180-oxnas-tld-1 zImage.fdt cat dts/ox820-akitio.dtb >> zImage.fdt mkimage -A arm -O linux -C none -T kernel -a 0x60008000 -e 0x60008000 -n 'Linux-4.1by Popo - Rescue System
Hi, Bodhi : https://forum.doozan.com/read.php?3,93499,93729#msg-93729 After this preparation of the boot area of the disk you have to write the linux file system to the SATA drive: I have used the current latest version for this: Debian-4.4.54-oxnas-tld-1-rootfs-bodhi.tar.bz2 Unpack the archive to a temporary directory on your system (all this still logged in as root (sudo -i)) to aby Popo - Rescue System
OK, I got new ERROR after I re-create rescue hdd cause by I put rootfs to primary partition 2 after ok by put rootfs to primary partition 1 But, I remove /boot U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Seby Popo - Rescue System
It's OK, I can confirm for this way to make a rescue hdd for akitio mycloud mini. But, I got error this error after i boot from hdd. No matter if I format rootfs into ext2/ext3/ext4 U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b pllby Popo - Rescue System
Hi, Bodhi : When I was using an empty hard disk to place the rootfs and u-boot files, I saw these two instructions in the guide, which confused me. Latest released kernel: linux-5.4.224-oxnas-tld-1.bodhi.tar.bz2 (16 Nov 2022) Latest released rootfs: Debian-4.14.180-oxnas-tld-1-rootfs-bodhi.tar.bz2 (17 May 2020) Note: If this is your first time installation, then you only need rootfsby Popo - Rescue System
Yes, Bodhi : After I took a nap, I realized how stupid I was!! My machine can successfully load the kernel, but the UBIFS mount fails. Carefully observing the boot process, you can find that both USB and STA have been initialized successfully. Going back to the most basic Linux knowledge, U-Boot (Boot-Loader) passes the boot parameters to the kernel, and the kernel performs root mountingby Popo - Rescue System
BTW, I have had a plan in mind for many years. This was due to the fact that the specifications of Rasperberry pi in the past few years in terms of storage speed, memory, and network were too low-end. As a result, I was unable to successfully construct a supercomputer and perform parallel computing with Rasperberry PI. . I plan to use 12 Akitio Mycloud Minis for supercomputer parallel compuby Popo - Rescue System
Maybe it's because I can't successfully execute the ping/tftpboot command in the U-boot function on my machine. It always prompts that the PHY is not recognized, and then it is waiting for the connection to the TFTP Server without prompting. timeout. So I think the manufacturer seems to have taken advantage of a certain firmware update to rewrite the U-boot program, causing the tftp booby Popo - Rescue System
Has anyone ever try to use JTAG to flash U-boot on this machine? I want to try use JTAG to flash the U-boot firmware from Bodhi.by Popo - Rescue System
Sign , Bodhi : After I Backup all of files from NAS to my NFS Server. Power Off and Remove HDD. I alway got this error every each time after I power on . I really want to boot from HDD. I know, I must use stock kernel to flash new u-boot then Unlock all features further and possibilities. I know , if I can use tftp boot from U-boot, seems like the other way to play. have any otherby Popo - Rescue System
I found a way to change root password ..... after boot, the lastest kernel force to change shadow file. I can use any 'service' as root to execute shell script to 'make it auto' to moify shadow file to what I want. So that, I can use telnet to login as root. One more thing .. I must flash openWRT u-boot to make HDD boot ? my u-boot can't tftpboot ....(PHY causeby Popo - Rescue System
Thanks, Bodhi , It's very funny for playing system. I will try it ! Now, Everything fine. I can login into web and startup telnet after I try to force single mode again. I put 'htdigest' file into nas profile directory, everything is find. But I still can't login as root. I found that, 'the last firmware'(20170630) may check the root password, if diffrentby Popo - Rescue System
OK, After I cool down machine and Myself. I reboot again ! amazing ..... It works !! But, I can't login from web, becase there is a file called "htdigest" ,I don't know where to put .... so , my akitio web page still can't login . I still can't user serial console to type any word....so , I can't try login root in Putty. I forgot to open telnet startup ...sby Popo - Rescue System
Finally... I forced into single mode on my system used "run boot_cmd" after I use easy linux command be like "cat > XXXX << EOF" to fix all of the file . I used "sync;sync;sync;" to flash to ubifs" aftr I typed "exit" but ... error .... kernel panic .... I try to force power button and boot again , "can’t inby Popo - Rescue System
unfortunately ... I try tftpboot in u-boot shell, I got these log and waiting long long time had no response. have any suggestion or idea ? I just want to force into single mode to rescue my system .....sigh!! U-Boot 1.1.2 (Dec 24 2010 - 12:42:28) U-Boot code: 60D00000 -> 60D1A0D8 BSS: -> 60D1E790 RAM Configuration: Bank #0: 60000000 256 MB SRAM Configurationby Popo - Rescue System
Please ref. https://forum.doozan.com/read.php?4,136213 I have no compile env to make U-Boot 1.1.4 com from WarheadsSE on github. can someone publish binary file to help me ? I wan to flash this U-Boot version on mycloudmini to replace 1.1.2 to 1.1.4 and boot stock kernel force into linux single mode to rescue system. or , and has any one have ArchLinuxArm for Oxnas820 ? Maybe Iby Popo - uBoot
Hi, I have akitio mycloudmini used oem factory firmware, at yesterday , I want to try to modify root's passord. So, I backup and save the zip file. open it, modify 'shadow ' file to my admin password for root. after did that, I use 'Restore' to upload zip file to server then click 'restart' to reboot. at the long long time, i can't 'Pingby Popo - Rescue System
sorry , wrong topic. please ref. https://forum.doozan.com/read.php?4,136213,136213#msg-136213 https://forum.doozan.com/read.php?3,136214,136214#msg-136214 for rescue mycloudminiby Popo - Debian