I use this information on my Dockstar but have this errors I hope some one can help me out root@raspberrypi:~# openocd -f pogo.cfg Open On-Chip Debugger 0.10.0-dev-00024-gd28ab08 (2015-09-26-12:03) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html SysfsGPIO nums: tck = 11, tms = 25, tdi = 10, tdo = 9 SysfsGPIO num: srst = 24 Info : auto-sby markweng - uBoot
ebbes Wrote: ------------------------------------------------------- > Okay, I tried to change the initialization > sequence to more closely match Marvell U-Boot. > Please try this file. > But if you don't feel like the drive is rotating, > then maybe staggered spin-up is still a valid > option... here is output, I still don't feel the hard driver is rotatingby markweng - uBoot
ebbes Wrote: ------------------------------------------------------- > Please test the uboot in attachment, it has > timeout increased to 20000 µs and prints (very > few) debug messages. The hard driver is conneted directly into SATA port. I don't feel the hard driver is running U-Boot 2014.01-pogoplugv4-dirty (Mar 08 2014 - 18:40:46) Pogoplug v4/Mobile SoC: Kirkby markweng - uBoot
bodhi Wrote: ------------------------------------------------------- > Agreed. But you are running modified stock Marvell > uBoot from Malc. Not the latest from mainline > u-Boot source tree. It's most likely the timing > problem, IMO. > > So perhaps the waittime was adjusted in Marvell > code. I don't know the coding much, but I do willing to test anby markweng - uBoot
When I tried another uboot from Malc http://forum.doozan.com/read.php?3,15091 Ide reset is OK. so should not be the power problem. Hope this help. 99 % [....................................] U-Boot 1.1.4 (Feb 12 2014 - 19:25:05) Cloud Engines 1.1.2 (3.4.27) MW1402121924 SATA PHYADDR=0 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFBE0 Soc: 88F6192 A1 (DDR2) CPU runby markweng - uBoot
I plug it in the SATA port directlyby markweng - uBoot
Here is the output when I tried the uboot on my seagate backup plus 1TB when I did a ide reset it shows "ide_preinit failed" 83 % [......................................................................] 85 % [......................................................................] 87 % [......................................................................] 88 % [...........by markweng - uBoot
bodhi Wrote: ------------------------------------------------------- > Mark, > > Here it is: > > kwboot > md5: > 0efd011bdb244436e432a8de33e639a1 bodhi, Thank you very much for your help. I run kwboot on E02 then test on NSA320, when I turn on the NSA320, it just pick up the uboot right the way root@debian:/test# kwboot -t -B 115200 /dev/ttyUSB0 -b ubootby markweng - Debian
bodhi Wrote: ------------------------------------------------------- > Hi Mark, > > > I do like to try UART Booting but I only have > one > > PC with WIN7. > > I have kwboot binary only for ARM. I'm not sure if > there is such a version for x86. Do you have > another Kirwood plug that you can run it from? I > thought you do have both the Pogoby markweng - Debian
Hi bodhi, Do you have kwboot can work under Linux Kernel 3.12.0 Kirkwood ? I do like to try UART Booting but I only have one PC with WIN7. If you do can you send me a copy Thanks Markby markweng - Debian
Does the stock OS still work if I install the uboot from here? Thanksby markweng - Debian
I just ordered NSA320 couple days ago, I will get it next week sometime. I am willing to copy the the uboot for you if you tell me how to do it. Markby markweng - uBoot
nsa320 Now is $60 NSA320(rakuten) If you are member of rakuten(Buy.com) they give you 1000 super point (which is $10) so total cost should be around $50 if you pay by CCby markweng - Debian
Hi bodhi, Your Kernel 3.2.28 works, I set machid to dd6 then I have the LED in Green, and the pan/tilt work,too. Thank you very much. Markby markweng - Debian
Hi bodhi, Yes my POGO-E02 has latest uBoot. I would like to try your 3.2.26 and 3.2.28 kernel, I really appreciate your help. Thanks again Markby markweng - Debian
Hi bodhi, Can I use your patch on kernel 3.2 for POGO-E02 LED ? I have Logitech Sphere pan/tilt with Motion working well for years under 3.2.0 on pogo-E02. I have been using your kernel on other and I really like it. So I have tried your kernel and others for Logitech Sphere pan/tilt with Motion, the problem is the wencam works fine but the pan/tilt stop working. I found the kernel higherby markweng - Debian
Hi bodhi I have tried to download the files couple time. When I try to open it shows error tar -xjf uboot.2013.10.goflexnet.bodhi.tar.bz2 bzip2: (stdin) is not a bzip2 file. tar: Child returned status 2 tar: Error is not recoverable: exiting nowby markweng - uBoot
http://1sale.com/electronics/other/nsa320/by markweng - Debian
I download Johannes's rescue system files which runs in RAM from here : http://www.sendspace.com/file/afgz0q (MD5: 495a32cbb2818111d7dc437805d2630e) Thanks Johannes When I tried to load Johannes's uImage at 0x800000 it always fail on the end, so I change the location to 0x680000 then is fine. I have tired Debian installer from http://www.cyrius.com/debian/kirkwood/sheevaplug/ tby markweng - Debian
Thanks Varkey, I finally found a way to load the uImage and uInitrd from tftp so now I can boot into Jeff Doozan's Dockstar/Pogoplug Recovery Systemby markweng - Debian
patrick0525 Wrote: ------------------------------------------------------- > I need some help , This is the serial console > output. > Any comments? Hi patrick0525, I have the same console output, after I installed the uboot, no longer boot in pogo. Have you fond the solution yet?by markweng - Debian
archat68 Wrote: ------------------------------------------------------- > I'm trying to follow this guide > > Unbricking with serial cable > > But I can't issue the "resetenv" command - it says > command not found. I have done this myself,,,, You better freash back to the Org Uboot before you do this.by markweng - Debian
Hi aperson After you update the uboot from AbsoluteNirvana When you but into Pogo OS do you still see the 256MB of RAM also? Thanks Markby markweng - uBoot
Hi EWTUC I really don't know about Linux much... I didn't recompile "motion" ,I installed by apt-get I have 3 logitech webcams but only the oldest one Pro3000 won't work, So I downloaded the kernel and follow the infomation how to compile the module I compiled it on my Dockstar, it tool long time to finish but it solved my problem. Markby markweng - Debian
I have Logitech Pro3000 and when I plug in the webcam seems everything OK,lsusb and lsmod I can see the system detect the webcam, but when I run the "motion" it shows that it has problem connect to /dev/video0. So finally I compiled all the modules and installed then "motion" works fine.. hope it helps. Markby markweng - Debian
Hi noplan Does the u-Boot still working? If the u-boot still work then you can try what I did on mine,, http://forum.doozan.com/read.php?2,519,538#msg-538by markweng - Debian
I found this information from http://www.webmin.com/deb.html It works find for me. If you like to install and update Webmin via APT, edit the /etc/apt/sources.list file on your system and add the line : deb http://download.webmin.com/download/repository sarge contrib cd /root wget http://www.webmin.com/jcameron-key.asc apt-key add jcameron-key.asc apt-get update apt-get instalby markweng - Debian
Hello gorgone Can you put uvcvideo and pwc in the kernel Thanksby markweng - Debian
Hi gorgone My Cam won't work any more with the kernel with Motion.by markweng - Debian
karamazov1 Wrote: ------------------------------------------------------- > Thanks Mark. I'm not sure what went wrong, but I > had to reinstall uboot image since I couldn't boot > into plugbox anymore. To start, booted into > pogoplug and applyied the flash erase and > nandwrite. Rebooted a couple times, and kept > ending up at pogoplug. So I had ro reinstall ubby markweng - uBoot