Quote root@pogo:~# apt-get install u-boot-tools Reading package lists... Done Building dependency tree Reading state information... Done u-boot-tools is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. root@pogo:~# uname -a Linux pogo 3.16.0-kirkwood-tld-2 #2 PREEMPT Sun Aug 31 18:56:01 PDT 2014 armv5tel GNU/Linux root@pogo:~# uboot is lateby jst818 - Debian
Where can i find "fw_setenv & fw_printenv " ? My debian says "comand not found".by jst818 - Debian
"cnd" means https://wiki.debian.org/DebianGeoMirror Meaning if debian server find your ip is from Japan, is will redirect you Japan debian mirror, this way update will be faster it and save them traffic. Debian Sources List Generator http://debgen.simplylinux.ch/by jst818 - Debian
Cheaptest j1900 mobo http://geizhals.eu/asrock-q1900b-itx-90-mxgtr0-a0uayz-a1089506.html 56 eur 2 gb ram 22 eur , psu/case http://www.lc-power.de/index.php?id=345 https://geizhals.at/lc-power-lc-1350mi-75w-extern-a893279.html 48 eur == 126 eur anc you have monster compared to arm SoC.by jst818 - Debian
Along with "setenv" you must enter "saveenv" (save to nand), otherwise changes will be forgotten on next boot.by jst818 - Debian
Than for your responses. Now rescue is working & booting from usb. + i finaly managed to restore to life my USB to TTL Converter: http://blog.qnology.com/2013/10/pogoplug-e02-v2-serial-connection.html my initial connection was: gnd -> gnd txd -> txd rxd -> rxd But when you look picture carefully you see txd is connected with rxd (and rxd to txd). http://4.bp.blogsby jst818 - uBoot
Yesterday evening i managed to convert string from "uboot.2014.07-tld-1.environment.img" into more human form with notepad ++ Quote arcNumber=3542 machid=0xdd6 ipaddr=192.168.1.100 serverip=192.168.1.2 mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) baudrate=115200 bootcmd=run bootcmd_usb; run bootcmd_mmc; run bootcmd_sata; reset bootcmd_mmc=run mmc_iby jst818 - uBoot
Is this the latest completed set of U-Boot envs ? http://forum.doozan.com/read.php?3,16148,16148#msg-16148 I can edit my env with "setenv" within uboot serial console and the save it.by jst818 - uBoot
How can i right now flash default envs from section B or reset envs to more default vaules bcz now i only have u-boot commands available http://www.denx.de/wiki/DULG/Manual?by jst818 - uBoot
pogoplug e02 I am unable to see anything through putty, my USB to TTL Converter is http://www.ebay.com/itm/New-1PCS-5PIN-PL2303-USB-To-TTL-Auto-Converter-Adapter-Module-unit-For-arduino-/141150349286 I am following this guide: http://blog.qnology.com/2013/10/pogoplug-e02-v2-serial-connection.html Tested on 2 compters, winxp/win7 x32. Putty window just stays blank. If i connect sby jst818 - uBoot
Now i flashed with method A, now pogo e02 wont boot, with/without usb hdd. \nc111nt_rodneybeede>nc -l -u -p 6666 output: Quote U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:29:52) Pogo E02 gcc (Debian 4.6.3-14) 4.6.3 GNU ld (GNU Binutils for Debian) 2.22 Unknown command 'fw_setenv' - try 'help' U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:29:52) Pogo E02 gcc (Debian 4.6.by jst818 - uBoot
pogoplug e02 I am unable to see anything through putty, my USB to TTL Converter is http://www.ebay.com/itm/New-1PCS-5PIN-PL2303-USB-To-TTL-Auto-Converter-Adapter-Module-unit-For-arduino-/141150349286 I am following this guide: http://blog.qnology.com/2013/10/pogoplug-e02-v2-serial-connection.html Tested on 2 compters, winxp/win7 x32. Putty window just stays blank. If i connect sataby jst818 - uBoot
I am not sure how to do it. This is my /etc/rc.local http://pastebin.com/LB5xz1sL Quote root@pogo:~# ls -l /etc/rc.local -rwxr-xr-x 1 root root 1356 Jun 14 2013 /etc/rc.localby jst818 - Debian
Do i need to enter this command every time debian arm device is restarted ?by jst818 - Debian
This is strange. Try using this, it might teel you what FS is used: http://www.partitionwizard.com/free-partition-manager.html What result do you get connecting hdd into usb 2.0 ?by jst818 - Debian
Meanwhile i searched some more and found promising link: http://lazydroid.com/2013/05/raspberry-pi-peerguardian-moblock-setup/ Now i have peerguardian up & running, first i got error 170, log showed iptables are missing, "apt-get install iptables" did the job done. Be carefull to edit /etc/pgl/pglcmd.conf , otherwise you will be blocked accessing arm device from local lan tooby jst818 - Debian
Looking for PeerGuardian / MoBlock that works on armel debian (device pogo plug e02). I searched on http://packages.debian.org, google, and cannot find anything usefull.by jst818 - Debian
Check your hdd with "Data Lifeguard Diagnostic for DOS" (full scan, it will take a while to complete) http://support.wdc.com/product/download.asp?groupid=612&sid=2&lang=en I see you are using Western Digital Raptor 10k rpm 74Gb drive through eSATA, has it enough power juice ? Try changing esata cable, external power supply. Found similar problem: https://newit.co.uk/forby jst818 - Rescue System
my qoute QuoteLooks like someone has modified bootloader, because without usb it should boot into stock pogo firmware, but it doesnt, because pogo is not recognized under my.pogoplug.com site. This was my assumption, and could be wrong, cause there are 2 possibilities 1. stock fw with stopped Pogoplug software (hbwd) 2. debian on nand Taking into account tutorial from http://rustybytes.comby jst818 - Debian
Noob question: Device: Pogoplug E02 arcNumber 3542 I first installed this: http://rolandsoft.blogspot.com/2013/02/installing-debian-wheezy-for.html Quote 2. Install Arch Linux or some other Linux derivative, boot from that, login and: Install Rescue system (this replaces the Pogoplug partition with a powerful rescue system. cd /tmp wget http://jeff.doozan.com/debian/rescue/instalby jst818 - Rescue System
QuoteSo its booting into this "squeezeplug" distro from USB? I guess so, but i dont have that particular usb stick. QuoteLooking at the instructions, I bet you could just boot a brand new stick built from bohdi's 3.12.0-kirkwood-tld3 rootfs http://forum.doozan.com/read.php?2,12096 QuoteUpdated 14 Dec 2013: Rootfs Debian-3.12.0-kirkwood-tld-3 was uploaded. This rootfs is to keby jst818 - Debian
Ok, here is the sittuation, i bought 2nd hand Pogoplug E02 with uknown ssh password, previous owner says this distro was installed:http://rustybytes.com/2011/02/16/setup-your-pogoplug-as-a-squeezebox-server/#more-42 . Looks like someone has modified bootloader, because without usb it should boot into stock pogo fimrware, but it doesnt, because pogo is not recognized under my.pogoplug.com site.by jst818 - Debian