Show all posts by user
Mele A1000/A2000/MK802/A10 tablet discussions
Re: Lede on Pogo E02 HowTo - 6 years ago
hallo bodhi, i´ve tried your suggestion and it worked also without any arcNumber.... LEDE and debian -- joerg_999by joerg_999 - Rescue System
Re: Lede on Pogo E02 HowTo - 6 years ago
konus Wrote: ------------------------------------------------------- > OK that seems to have done the trick > > setenv arcNumber 3542 > saveenv > reset > > Then follow all the steps in joerg_999's original > description at the top of the page. > > This results in a lede install in nand. It still > boots debian when I reboot while the correct uby joerg_999 - Rescue System
Re: HOW2: Repair Pogo E02 with Raspberry PI (1,2 or 3) JTAG and OpenOCD - 6 years ago
Try this: adapter_khz 200 and nand write should succeded. (see some posts above) --joerg_999by joerg_999 - uBoot
Re: Pogo E02 u-boot envs for LEDE - 6 years ago
bodhi, that worked, your new bootcmd_exec did it. - could maybe implemented fix in the next uenvs... - thank you very much again. joerg_999by joerg_999 - Rescue System
Re: Pogo E02 u-boot envs for LEDE - 6 years ago
thanks for the quick reply, i will test and report as soon as possible. best regards and marry christmas -joerg_999by joerg_999 - Rescue System
Re: Pogo E02 u-boot envs for LEDE - 6 years ago
Hello Bodhi , here is the log: [ 99.274476] reboot: Restarting system U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2by joerg_999 - Rescue System
Pogo E02 u-boot envs for LEDE - 6 years ago
need help to figure out the right boot-envs and order: Whats my problem: i ve put LEDE on my Pogo-e02 changed the envs based on bodhis uboot.2016.05-tld-1.environment like this: # envs PogoE02 @debian (checked with uboot.2016.05-tld-1.environment): fw_setenv mtdparts 'mtdparts=orion_nand:0x100000@0x0(u-boot),-@0x100000(ubi)' fw_setenv set_bootargs_lede 'setenv bootargsby joerg_999 - Rescue System
Re: Original English Version Xiaomi Mi WiFi Router 3 under $28 - 6 years ago
You are welcome, i did my upgrade 6 weeks ago - a little bit confusing because of the chinese webpage but possible an only for the first upgrade. Every further update/upgrade works like a normal sysupgrade you normaly do with LEDE. don't hesitate, if you have any questions. good succeed joerg_999by joerg_999 - Off-Topic
Re: Original English Version Xiaomi Mi WiFi Router 3 under $28 - 6 years ago
of course, see the update instructions here: you have to take the mir3g from snapshots here: LEDE_nightly 1. Unbox router 2. Connect to the router using WiFi 3. Goto http://192.168.31.11 4. Go through the wizard to set passwords for the router + wifi 5. Reconnect to the router using WiFi 6. Goto http://192.168.31.11 7. Logon and find the page where you can upgrade the firmware look forby joerg_999 - Off-Topic
Re: Original English Version Xiaomi Mi WiFi Router 3 under $28 - 6 years ago
I think this is the better choice for 10 bucks more: Original Xiaomi WiFi Router 3G - WHITE 214613301 1167Mbps 802.11ac Dual Band Gigabit USB 3.0 256MB DDR3-1200 Original Xiaomi Mi WiFi Router 3G Original Xiaomi Mi WiFi Router 3G is the updated version of the Original Xiaomi Mi WiFi Router 3. With 867Mbps wireless speeds over the crystal clear 5GHz band and 300Mbps over the 2.4GHz band.by joerg_999 - Off-Topic
OpenWrt (Lede) on Pogo E02 HowTo - 6 years ago
How to install LEDE/openwrt on a Pogo E02: You can do this similar with all the kirkwoodplugs using the matching files... Note: If you dont have serial console (USB/serial adapter), NC (NetCat) should be configured properly! 1. Upgrade the Uboot + uboot-envs to most recent bodhi version (atm = uboot.2017.07-tld-1.pogo_e02.bodhi + uboot.2016.05-tld-1.environment) download, (rename) anby joerg_999 - Rescue System
Re: LEDE on a dockstar device with now openwrt - 6 years ago
@bobafetthotmail Do you have some hints for putting Lede on a POGO E02 nand containing bodhis latest uboot + envs? specially for the part "mtdparts" in the uboot envs. The procedure should be nearly the same like dockstar but in my case the log tells me from broken pipes... what have i done, whats working and whats not: * updated uboot to the latest uboot.2017.07-tld-1.pogo_e02.mby joerg_999 - Rescue System
Re: Unbricking Pogoplug E02 using Jtag. Help with pinout? - 7 years ago
Hi dumdedumda should be PIN 8 TRST at your Busblaster --joerg_999by joerg_999 - uBoot
Re: HOW2: Repair Pogo E02 with Raspberry PI (1,2 or 3) JTAG and OpenOCD - 7 years ago
youxiaojie Wrote: ------------------------------------------------------- > dear joerg, the image of connexion to pogo is miss > ing. can you attached again here? of course, dropbox have changed something with my public folder, i will resend the pictures links. -joerg_999 -should work again ;-)by joerg_999 - uBoot
Re: Linux Kernel 4.10.0 Kirkwood package and Debian rootfs - 7 years ago
@ bodhi I had problems using my stick with your latest rootfs on different plugs. maybe you could advice user to change the following in their rootfs if the use the stick/cf-card on different Plugs to avoid network issues: nano /etc/udev/rules.d/70-persistent-net.rules clear everything and paste the following: # Pogoplug: net device () SUBSYSTEM=="net", ACTION=="add&qby joerg_999 - Debian
Re: HOW2: Repair Pogo E02 with Raspberry PI (1,2 or 3) JTAG and OpenOCD - 7 years ago
Thanks for your feedback, i changed the following in raspberrypi123-native.cfg on page1: # adapter speed in khz # my Raspi/Pogo combo accepted 2000 khz but safely it should work with adapter_khz 200 # adapter nsrst delay in ms # if you try to flash goflexnet or iomega uncomment next line to increase delay from 200ms to 500ms # adapter_nsrst_delay 500 -joerg_999by joerg_999 - uBoot
Re: HOW2: Repair Pogo E02 with Raspberry PI (1,2 or 3) JTAG and OpenOCD - 7 years ago
Nice to hear J.Carlos, sorry for answering so late, we had bad weather with freezing rain today, but I´m happy that your dockstar is back in live now. -joerg_999by joerg_999 - uBoot
Re: HOW2: Repair Pogo E02 with Raspberry PI (1,2 or 3) JTAG and OpenOCD - 7 years ago
Hi J. Carlos please see post http://forum.doozan.com/read.php?3,21789,27701#msg-27701 this is JTAG connection for Dockstar, GoflexNet and GoflexHome -joerg_999by joerg_999 - uBoot
Re: OrangePi H3 based - 8 years ago
Thank´s for your Response, nice to hear that you´r happy with banana pro. banana pi pro is maybe the better choice for something like to build a NAS or fast copying of large files, but costs more like a OPI PC i think. But for the price, there is no other SOC to beat the OPI one. I`ve used mine for a small inhouse cardserver for watching TV and there is no need for SATA or handling big filby joerg_999 - Allwinner A10
Re: HOW2: Repair Pogo E02 with Raspberry PI (1,2 or 3) JTAG and OpenOCD - 8 years ago
Mark Wrote: ------------------------------------------------------- > Does this work on Dockstar Also? > > Thanks Yes, should also work on a dockstar but you´ve to use dockstar.cfg from member z3bram3n some posts above. You also have to use the fitting uboot files for dockstar, envs are the same. Pinout should look like: #######################################################by joerg_999 - uBoot
Re: install new uBoot on GoFlex Net - 8 years ago
1 bytes read in 242 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 3166793 bytes read in 360 ms (8.4 MiB/s) loading uInitrd ... 7179935 bytes read in 423 ms (16.2 MiB/s) loading DTB /boot/dts/kirkwood-pogo_e02.dtb ... 10446 bytes read in 1102 ms (8.8 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-4.4.0-kirkwood-tld-1 Created:by joerg_999 - uBoot
Re: OrangePi H3 based - 8 years ago
Gravelrash Wrote: ------------------------------------------------------- > I have ordered its bigger brother, which has > onboard wifi and sata, hopefully this should prove > to be equally as performant and will form the > basis of an ISCSI setup im toying with. Let us know your experience with the bigger ones.... PS: I would also try the fitting Images for the bigger onesby joerg_999 - Allwinner A10
Re: OrangePi H3 based - 8 years ago
Let´s test the Orange 10$ Pi, I got mine 2 pieces from China today. Took about 4 Weeks for shipping to Europe. First Impression - much more smaller than the Raspi. Let`s see if he do his Job well..... -joerg_999 Update: the on and only Image who did do it´s Job out of the box is from Igor pecovnik: http://mirror.igorpecovnik.com for the orange pi one take the "Armbian_5.05_Orby joerg_999 - Allwinner A10
Re: C.H.I.P $9 (actually $16) computer - 8 years ago
Thanks for all the Information on OPI-one, i ordered also 2 with power-to USB-strips. 25$ incl.shipping to Europe - WOW I think thats a good price for new men toys. PS: I´ve revised my HOW2: POGO repair with Raspi-Jtag because i found a scribal in the reset pin configuration.....by joerg_999 - Allwinner A10
Re: HOW2: Repair Pogo E02 with Raspberry PI (JTAG) and OpenOCD - 8 years ago
Haven´t had some Pogo, I´ll start some tests in nativ mode today...... Good news, i got it working. It was a timing and reset problem. I will change my discription on page 1, but before i´ll do some more tests for better Performance the main changes: 1.) switched to raspi-nativ mode for more speed (you have to compile with new nativ option enabled), 2.) set adapter_khz 2000 speedby joerg_999 - uBoot
Re: HOW2: Repair Pogo E02 with Raspberry PI (JTAG) and OpenOCD - 8 years ago
I think there are some timing problems, i´ll try to find a solution, please have patience. joerg_999by joerg_999 - uBoot
Re: HOW2: Repair Pogo E02 with Raspberry PI (JTAG) and OpenOCD - 8 years ago
If you see this output, start from the beginning: > nand probe 0 # unknown NAND flash device found, manufacturer id: 0x00 device id: 0x00 ## not OK! # in procedure 'nand' --joerg_999by joerg_999 - uBoot
Re: HOW2: Repair Pogo E02 with Raspberry PI (JTAG) and OpenOCD - 8 years ago
"pogo_init" don´t work like it should, i´ll try to find a solution, please have patience. joerg_999 Note: see solution in post# 1by joerg_999 - uBoot
Re: HOW2: Repair Pogo E02 with Raspberry PI (JTAG) and OpenOCD - 8 years ago
The only difference at the time i started (april 2015), was the Raspi OS it was wheezy and now we use jessie. The second point was the version of openOCD, i used 0.9.0, but that shouldn´t matter. In the next week(s) i´ll certainly get a defektiv Pogo and give it a try. The speed of my raspi B+ was 900Mhz (at this time i think it should also work with another speed...) My last Pogo stuck alby joerg_999 - uBoot
Re: HOW2: Repair Pogo E02 with Raspberry PI (JTAG) and OpenOCD - 8 years ago
Maybe a good try, dont forget to decrease your Raspi Speed to 700Mhz. Thanks for your Input.I´ll also do some tests.by joerg_999 - uBoot