bodhi Wrote: ------------------------------------------------------- > Dale, > > > Finallly, check TOP, very little CPU/Mem > > usage, everyone said the V4 was no good for > this, > > I think it's running just fine :) > > Very nice :) > > > [ 0.000000] Machine: Marvell OpenRD Ultimate > > Board > > This is the reason.by rustyspoons - uBoot
Hi Bodhi, Dmesg output All seems to be working well, even picks up the SATA controller! # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.9.4-200.fc18.armv5tel.kirkwood (mockbuild@arm04-builder21.arm.fedoraproject.org) (gcc version 4.7.2 20121109 (Red Haby rustyspoons - uBoot
Bodhi, Fedora doesn't boot with a machid and has no control over the LED, so both green and red light up, is there anything in uBOOT I can change just so I get green LED?by rustyspoons - uBoot
Bodhi, It's working :D Few little tweaks and I'll make a script to install the env's, amazing, boots quicker than E02 and playing music right now :D :D, thanks for your assistance :D Fedora release 18 (Spherical Cow) Kernel 3.9.4-200.fc18.armv5tel.kirkwood on an armv5tel (ttyS0) localhost login: root Password: # [ 174.858681] usb 2-1: new full-speed USB device nby rustyspoons - uBoot
Thought this might help Pogoplug E02 with VAMP, Working uBOOT Env U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USby rustyspoons - uBoot
bodhi Wrote: ------------------------------------------------------- > rustyspoons Wrote: > -------------------------------------------------- > ----- > > bodhi Wrote: > > > -------------------------------------------------- > > > ----- > > > Make sure your u-boot env rootfstype matches > > what > > > fs you have on the USB driby rustyspoons - uBoot
bodhi Wrote: ------------------------------------------------------- > Make sure your u-boot env rootfstype matches what > fs you have on the USB drive (ext2,3,4). I've tried ext4 but still the same.by rustyspoons - uBoot
This is my solution for serial connections, this one is an E02, I de-soldered the header and fit 3.5mm PCB mount female sockets, they fit perfectly and I just glue them to the plastic/usb port. I also use CP2102 for most things :) https://lh3.googleusercontent.com/-byLMEurJhXM/VELoLItWScI/AAAAAAAAK1E/KS2G2BCPTHE/w1598-h899-no/2014-10-18.jpg https://lh5.googleusercontent.com/-feqZ5LwYRE4/VEby rustyspoons - Off-Topic
Booting.... setenv machid setenv archnumber Now get as far as.... [ 20.602809] scsi 0:0:0:0: Direct-Access Lexar USB Flash Drive 8.07 PQ: 0 ANSI: 4 [ 20.616490] sd 0:0:0:0: 15659008 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 20.626105] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.637734] sd 0:0:0:0: Write Protect is off [ 20.649733] sd 0:0:0:0: Write cby rustyspoons - uBoot
Current NAND env (without me overiding) Of My V4 Pogov4> printenv arcNumber=3960 baudrate=115200 bootargs=console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext3 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) bootcmd=run bootcmd_usb; run bootcmd_mmc; run bootcmd_sata; reset bootcmd_mmc=run mmc_init; run set_bootargs_mmc; run mmc_boot bootcmd_satby rustyspoons - uBoot
U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45) Pogoplug V4 SoC: Kirkwood 88F6192_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 128 MiB MMC: kwsdio: 0 In: serial Out: serial Err: serial Net: egiga0 No link on egiga0 ping failed; host 192.168.1.100 is not alive Hit any key to stop autoboot: 0 Pogov4> setenv usb_load_uimage ext2load usb $device 0x800000 /uImaby rustyspoons - uBoot
Netconsole, Will get serial up soon, lost my CP2012, hunting around for it :)by rustyspoons - uBoot
rustyspoons Wrote: ------------------------------------------------------- > UPDATE, > > Re-installed your > uboot.2014.07-tld-1.environment.img, now entering > the 2 commands at Uboot console gets it booting > off VAMP kernel... > > Progress is happening!! U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45) Pogoplug V4 gcc (Debian 4.6.3-14) 4.6.3 GNU ld (GNUby rustyspoons - uBoot
UPDATE, Re-installed your uboot.2014.07-tld-1.environment.img, now entering the 2 commands at Uboot console gets it booting off VAMP kernel... Progress is happening!!by rustyspoons - uBoot
This is what I get if I manually insert the environemnts listed in Post 1 and try and boot the VAMP image. Pogov4> boot b o o t (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found ** Bad device usb 0x800000 ** ** Bad device usb 0x1100000 ** Wrong Image Format for bootm comby rustyspoons - uBoot
Bodhi, I have your UBOOT installed and also have a working copy of Debian on a flash stick, device is working fine, can boot to Debian perfectly, got root access and SSH. It will not boot from VAMP image as I expected, the green light flashes then flashes red and re-boots, I just need to figure out what the environment differences are to boot the VAMP image. Thanks, Daleby rustyspoons - uBoot
bodhi Wrote: ------------------------------------------------------- > @Dale, > > With the new u-boot you can set whatever envs you > need. If it's a Fedora image, then it should boot > without problem. However, as always, it is prudent > to try it out without flashing to NAND if you can. > The Pogo V4 has UART booting, so you should try > that since you havby rustyspoons - uBoot
Sorry just realised there was a word missing in my reply and didn't make sense. In my original post I put environment commands in a code box, which is what's needed to boot the image. I wanted to know if that environment is compatible with the U-Boot for the V4, I know those strings work with the U-Boot for the E02 with the U-Boot from here. However the VAMP image will notby rustyspoons - uBoot
bodhi Wrote: ------------------------------------------------------- > rustyspoons, > > > will the environments script in this > > guide work? or will I brick the V4 > > > > > http://vortexbox.org/forum/vortexbox/general/51318 > > > -install-vamp-0-6 > > You will brick it with that procedure! See this > u-boot: > http://forumby rustyspoons - uBoot
I have a collection of Pogoplugs thank's to the great U-Boot on here, brilliant little devices. I also have serial access on them all. On one of them I run VAMP 0.6 as a music player, I have tried a squeezelite install on ARCH/Debian but it does not seem to work as well as the Fedora based VAMP image that they have created on Vortexbox. As the E02 is getting harder to find, I have oby rustyspoons - uBoot