I saw a random blog post suggesting the SOC of this device might support sata port multiplication through it's single connector. I don't have current access to my 4 disk port multiplication compatible external box. Anybody have the means to try this? Was thinking this could be turned into the brains of a half decent NAS with the speed it seems to have. You would need to cut a holeby LeggoMyEggo - Debian
bodhi Wrote: ------------------------------------------------------- > Did you do any thing extra to get the USB host for > internal SD card activated? I thought that the internal SD card was actually a chip embedded on the device. IIRC, it's 4GB? I hope I am not confusing devices but I think this is the one where it would only initialize once per reset cycle, that is, you couby LeggoMyEggo - Debian
bodhi Wrote: ------------------------------------------------------- > But that UBI rootfs > rootfs-debian6.0-gti-mirabox-v5-0-1-120924.img > probably no good! > It booted until the error (dmesg showed the volume > was not found). > > > UBI error: ubi_read_volume_table: the layout > volume was not found > UBI error: ubi_init: cannot attach mtd2 > 0by LeggoMyEggo - Debian
bodhi Wrote: ------------------------------------------------------- > Hi Leggo, > > I'm downloading the FTP files. But looks like > there is no indication of where the U-Boot GPL > source is on that site? Globalscale is so piss poor with support that your observation would not surprise me. Read the reviews of their latest offering, the Espressobin, and lots ofby LeggoMyEggo - Debian
Bodhi, I am away from my Mirabox right now so can't get the mtd's directly off of it but the links at this website should be able to get you what you need: Reflashing Globalscale Mirabox Filesystem Just checked and the google docs archive is still active. LME Edit: Globalscale still has an active archive of files for the Mirabox here: Downloads Mirabox at Globalscale FTby LeggoMyEggo - Debian
OP, I see that kw boot might not work but it appears it will accept commands at the uboot command line if uboot is interupted. Can you do setenv commands? If so we might be able to netboot the Debian network installer ( for a similar Marvell device) and install the OS that way. Michael Michlmayr provides guidance here Plug computer Debian network install. I would try it just to see if you canby LeggoMyEggo - Debian
JDS420 Wrote: ---------------------------------------------------> > Here's some pictures of the CPU side of the board. > Sorry about the quality... I don't suppose you can snap a pic of the topside.......by LeggoMyEggo - Debian
Yes, the proper dtb file is most definitely in both bz2 files. BUT, in order to use this command "mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.12.4-mvebu-tld-1 -d zImage.fdt uImage" to embed dtb in uImage, I need the 'Linux-4.12.4-mvebu-tld-1' file which I cannot find anywhere. Have I overlooked it?by LeggoMyEggo - Debian
bodhi Wrote: ------------------------------------------------------- > However, first verify whether they have ported > the FDT. At serial consle prompt: > > > help > fdt > I typed 'fdt' at the Marvell>> command prompt and it said the command does not exist. Marvell>> help ? - alias for 'help' SatR - Sample At Resby LeggoMyEggo - Debian
It's been a while since I have posted, lurked mostly with nothing new to add. Picked up a Globalscale Mirabox cheaply and have tried to load bodhi Debian on it. Not sure what env's to use on the stock u-boot to get Debian-4.12.4-mvebu-tld-1 to boot from the external micro sd slot (mmcblk0). Globalscale Mirabox specs: 1.2Ghz Marvell Armada CPU ARMADA 370 ARM v7 compliant 802.by LeggoMyEggo - Debian
Curl command backdoor did not work on Pogoplug Pro/V3 for whatever reason. Like I said, only way to update u-boot was with serial console. At least that was my experience.by LeggoMyEggo - Off-Topic
Last plug I Debianized, option never appeared in Pogoplug online console even after waiting for an hour or so. Back door method with curl command didn't work either. Ended up doing the conversion via serial console. Anybody else have the same experience?by LeggoMyEggo - Off-Topic
FYI, I also enabled squeezelite on the same device running logitechmediaserver and both services running together seem to behave fine. I'll tuck the Guruplug it's running on someplace out of the way and control it's play either from the desktop or from Squeezer on my Android phone. Cool.by LeggoMyEggo - Debian
dexter Wrote: ------------------------------------------------------- > Mine works great as a client with Debian using > firmware-ralink and OpenWRT with kmod-rt2800-pci. > But not in AP mode. It there a hardware or driver > issue with using it as an AP? Not if you get the right card. In my case it's a Atheros AR9287. I had to configure the network in a way that was nby LeggoMyEggo - Off-Topic
Instructions worked for me on a Guruplug running OEM Debian Jessie with two exceptions. The download link you provided timed out so the one I used for the server deb package was 'wget http://downloads.slimdevices.com/nightly/7.9/sc/f67047a/logitechmediaserver_7.9.0~1466571941_all.deb'. That link can change daily so go here to get the latest file package link url. Also I needed to omby LeggoMyEggo - Debian
silox Wrote: ------------------------------------------------------- > The call history logs in the UCP interface however > don't have any icons/buttons to click allowing you > to listen to or download the recorded call like > the /recordings2 interface has. The 'CDR Reports' > page also doesn't have any listen/download > buttons. Is that to be expecby LeggoMyEggo - Off-Topic
silox Wrote: ------------------------------------------------------- > Speaking of performance though with the fax > services you added, any chance you could provide > me with a link to the incrediblefax11 script you > downloaded? I'd like to add that to my Pogoplug > Pro and check it out (only plan on light use, if > any at all). Download the script IPBX Raspi 2by LeggoMyEggo - Off-Topic
silox Wrote: ------------------------------------------------------- > In the add-ons section, I do NOT have 'app_mysql' > nor 'cdr_mysql' enabled due to them being listed > as deprecated and replaced by ODBC equivalents. > Let me know if that's not correct. But you did enable res_config_mysql ? If so, I don't know what went wrong. I checkedby LeggoMyEggo - Off-Topic
rkrug Wrote: ------------------------------------------------------- > dpkg: dependency problems prevent configuration of > logitechmediaserver: > logitechmediaserver depends on perl (>= 5.8.8); > however: > Package perl is not installed. > > dpkg: error processing package logitechmediaserver > (--install): > dependency problems - leaving unconfigureby LeggoMyEggo - Debian
bodhi Wrote: ------------------------------------------------------- > > :o) you been having a tipple?? > > Too early in the day for that :)) Care to share? WTF is tipple....I realize my geezerhood may prevent me from being aware of modern euphemisms.by LeggoMyEggo - Debian
Sure you have the date and time set correctly? I would make sure ntp is installed and also do a 'dpkg-reconfigure tzdata'. Also, what were your mysquerril choices when in menuselect? As a side note, I never understood why NV never created a generic Debian script. Any IPBX systems based on Debian they have created for the most part were images for the Pi and Pogoplug V4. I was fby LeggoMyEggo - Off-Topic
Reminder, don't confuse squeezeboxmediaserver (the server) with squeezelite (the player). It can get confusing for the uninitiated.by LeggoMyEggo - Debian
N/M, too slow to post. Information already posted above by OP.by LeggoMyEggo - Debian
Gravelrash Wrote: ------------------------------------------------------- > If you are really really stuck, I could compile > and package it as a one off. which will be time > dependant, and you would still have the dependancy > issue. I have stuck with Wheezy for the most part because most of the tutorials out there work with it. While I know Wheezy is soon EOS and eventualby LeggoMyEggo - Debian
Helpful hint: I use the Win32DiskImager read function to make incremental backups of my Pogoplug flash drives on my Windoze 7 machine when I am experimenting with programs. That way I can revert to the old image within a matter of minutes having "borked" a flash drive image through experimentation. You can use 7-zip to compress those image files as archives and minimize storage spacby LeggoMyEggo - Debian
notoneofmyseeds Wrote: ------------------------------------------------------- > Thanks, but I'm well past that now. I don't want > to go back to Wheezy, just because of this. I'd > rather stick with a more update OS. Thanks, > however I have found many times that you can use guides for Raspberry Pi (with slight modification) to get things like LMS to work on thby LeggoMyEggo - Debian
bodhi Wrote: ------------------------------------------------------- > Any disk would be fine. nanddump outputs a binary > file so Linux does not care. I see why I was confused. You are assuming doing the nand dump from within a running bodhi Debian rootfs which runs off a USB drive which has plenty of space to dump the file to. I was assuming doing the dump from the stock Cloud Engby LeggoMyEggo - Debian
Where am I dumping the file to, an attached USB flash drive? That's the part (no pun intended) I don't understand. If FD, should it be ext3 partition or is FAT ok?by LeggoMyEggo - Debian
I had that Plug (until I fried it by trying to use the wrong cable for serial) and I used the E02 u-boot. What sucks about that plug (other than one USB port and no SD card slot) is the the serial console connector is the same 4 position 1.25 micro JST pico blade as used in the Guruplug, Dreamplug and HP T5325. Better order a cable now before you start playing with it. And figure a future upgrby LeggoMyEggo - uBoot
bodhi Wrote: ------------------------------------------------------- > > Anybody has the original stock OS rootfs mtd > backup? How to retrieve from stock plug and stock cli? Please provide instructions.by LeggoMyEggo - Debian