Open Media Vault OMV NAS326 Samba transfer speeds
November 14, 2020 11:22AM
Hi,

I decided to create this thread to try to find the optimal Samba parameters to achieve maximum read/write speeds when using OMV installed on NAS326.

With the stock firmware I was able to achieve about 105MB/s read/write speeds and with Debian and OMV 5 installed I get around 60MB/s read/write.

Any suggestions?



Edited 2 time(s). Last edit at 12/28/2020 03:35PM by nickba.
Re: Open Media Vault OMV NAS326 Samba transfer speeds
November 18, 2020 09:14AM
a lot is down to configuration etc.

take a look at the - now outdated - howto for samba setup and it should give you a few pointers on optimisations.
Re: Open Media Vault OMV NAS326 Samba transfer speeds
November 21, 2020 05:20AM
Thanks for replying. Everything I tried so far didn't change the transfer speed. Do you have any suggestion I could try?
tme
Re: Open Media Vault OMV NAS326 Samba transfer speeds
November 21, 2020 09:28AM
Hi nickba,

If you switched Linux kernel, you may try to run Debian with the old stock kernel. And vice verse. It may not work, but if it one of the two does, at least you know which part of your current firmware to blame.

Regards,
Trond Melen
Re: Open Media Vault OMV NAS326 Samba transfer speeds
November 21, 2020 06:17PM
Thanks for replying.

Sorry for asking, but how can I run Debian with the stock kernel?
Re: Open Media Vault OMV NAS326 Samba transfer speeds
November 21, 2020 06:38PM
nickba,

> Sorry for asking, but how can I run Debian with
> the stock kernel?

No, it will not work properly.

Samba 60 MB/s is not bad.

However, there is more tuning needed in this kernel and rootfs. Things such as turning off network flow control, and tuning Samba parameters.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Re: Open Media Vault OMV NAS326 Samba transfer speeds
November 22, 2020 10:46AM
Thanks for replying. How can I turn off network flow control in the NAS326?
Re: Open Media Vault OMV NAS326 Samba transfer speeds
November 22, 2020 04:07PM
See the Wiki thread

https://forum.doozan.com/read.php?2,23630

Quote

Benchmarks

Pogo ProV3 vs Pogo E02
Another Pogo Pro V3 benchmarks
Network performance - SAMBA - NFS (various protocols)
Pogo Pro V3 Network NFS benchmarks
Kirkwood vs OXNAS network performance (with flow control)
Kirkwood vs OXNAS network performance (flow control turned off )
OXNAS vs OXNAS network performance (flow control turned off)

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Re: Open Media Vault OMV NAS326 Samba transfer speeds
November 22, 2020 06:46PM
Thanks for replying. Just tested it. It was already disabled. I enabled it just to test and it got slower. So I set it back to off.

Any other suggestion?
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: