Hi. I've been following Thomas' guide to install SqueezePlug on my GoFlex Home.
This uses your uBoot script to let the device boot from the SqueezePlug image on a USB-Stick.
When I run the script I got the error:
## Unknown uBoot detected on mtd0: 9b940e0b3b5a523f8b50ef0fa50af97f
##
## The installer could not detect the version of your current uBoot
## This may happen if you have installed a different uBoot on
## /dev/mtd0 or if you have bad blocks on /dev/mtd0
##
## If you have bad blocks on mtd0, you should not try to install uBoot.
##
## If you have installed a diffirent uBoot on mtd0, and understand the
## risks, you can re-run the installer with the --no-uboot-check parameter
##
I therefore ran it with the --no-uboot-check parameter and now have the GoFlex Home loading from the USB Stick, eventually.
Unfortunately, I cannot see the SATA HDD, so cannot mount this for data usage.
Can anyone help me with this?