GoFlex Home - Unknown uBoot detected on mtd0
February 07, 2012 05:34PM
Hi. I've been following Thomas' guide to install SqueezePlug on my GoFlex Home.
This uses your uBoot script to let the device boot from the SqueezePlug image on a USB-Stick.

When I run the script I got the error:
## Unknown uBoot detected on mtd0: 9b940e0b3b5a523f8b50ef0fa50af97f
## The installer could not detect the version of your current uBoot
## This may happen if you have installed a different uBoot on
## /dev/mtd0 or if you have bad blocks on /dev/mtd0
## If you have bad blocks on mtd0, you should not try to install uBoot.
## If you have installed a diffirent uBoot on mtd0, and understand the
## risks, you can re-run the installer with the --no-uboot-check parameter

I therefore ran it with the --no-uboot-check parameter and now have the GoFlex Home loading from the USB Stick, eventually.
Unfortunately, I cannot see the SATA HDD, so cannot mount this for data usage.

Can anyone help me with this?

Your Email:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.