Hi there,

I just picked up a Pogoplug from w*lmart for a bargain, remembering it's very similar to my exisiting sheevaplug.
The only real difference seems to be a crippled bootloader...

I tried to use the "all in one" scipt, mentioned on:

http://dev.shyd.de/2011/01/seagate-dockstar-debian-squeeze/

but it says


# Validating existing uBoot...
Block size 131072, page size 2048, OOB size 64
Dumping data starting at 0x00000000 and ending at 0x00080000...
Connecting to jeff.doozan.com (50.116.34.13:80)
Connecting to projects.doozan.com (50.116.34.13:80)
## Unknown uBoot detected on mtd0: 9e81c7974406c57378e992f044e5a8ce
##
## The installer could not detect the version of your current uBoot
## This may happen if you have installed a different uBoot on
## /dev/mtd0 or if you have bad blocks on /dev/mtd0
##
## If you have bad blocks on mtd0, you should not try to install uBoot.
##
## Installation cancelled.
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
1831424 inodes, 7323624 blocks
366181 blocks (5%) reserved for the super user
First data block=0
Maximum filesystem blocks=8388608
224 block groups
32768 blocks per group, 32768 fragments per group
8176 inodes per group
Superblock backups stored on blocks:

...after that, the rest of the install (debian) seems to be working in - at least it downlaoads packages and puts them on /dev/sda1, whicht was formatted before.

The question is: does the stock bootloader on the Pogoplug mobile work out of the box?

If not, how do I update it? With which uboot version should I update it?

I searched in the forum and googled'round but didn't find any informations regarding the pogoplug mobile...

Thank you very much in advance!

Cheers,

Uli-G