OpenWrt on GoFlex Home

Apparently OpenWrt can be installed on a GoFlex Home unit....

Does anyone have experience of this and pointers about how to do this?

balanga,

> Apparently OpenWrt can be installed on a GoFlex
> Home unit....
>
> Does anyone have experience of this and pointers
> about how to do this?

See the Wiki thread:
https://forum.doozan.com/read.php?2,23630

Quote

Rescue Systems

Rescue System V2 (Original)
MacPlug & SMBPLug
Rescue System Pogo V3
Rescue System V4, using a custom LEDE firmware (BETA)
Rescue System for Pogo E02 using LEDE

"Rescue System for Pogo E02 using LEDE" covers booting Pogo E02. But is applicable to booting LEDE/OpenWRT on GoFlex Home, you just need to use the GF Home images.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Thanks, bodhi.

I looked at the post but was not sure what the starting point was....

If I'm using a stock GoFlex Home unit what do I need to do first? I can ssh into the unit and know how to install ALARM but am not sure if that is what I need to do.

Do I need to use kwboot with uboot.2017.07-tld-1.goflexhome.bodhi.tar ?

balanga Wrote:
-------------------------------------------------------
> Do I need to use kwboot with
> uboot.2017.07-tld-1.goflexhome.bodhi.tar ?

Yes, you need to flash uboot.2017.07-tld-1.goflexhome.bodhi.tar as joerg's instruction stated.

Basically, you would install new u-boot, and Debian rootfs. And then install LEDE using that instruction. And if something about installing LEDE that's not clear, please post in that thread.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)