Welcome! Log In Create A New Profile

Advanced

OpenWrt on GoFlex Home

Posted by balanga 
OpenWrt on GoFlex Home
June 01, 2018 06:48AM
Apparently OpenWrt can be installed on a GoFlex Home unit....

Does anyone have experience of this and pointers about how to do this?
Re: OpenWrt on GoFlex Home
June 01, 2018 05:05PM
balanga,

> Apparently OpenWrt can be installed on a GoFlex
> Home unit....
>
> Does anyone have experience of this and pointers
> about how to do this?

See the Wiki thread:
https://forum.doozan.com/read.php?2,23630

Quote

Rescue Systems

Rescue System V2 (Original)
MacPlug & SMBPLug
Rescue System Pogo V3
Rescue System V4, using a custom LEDE firmware (BETA)
Rescue System for Pogo E02 using LEDE

"Rescue System for Pogo E02 using LEDE" covers booting Pogo E02. But is applicable to booting LEDE/OpenWRT on GoFlex Home, you just need to use the GF Home images.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: OpenWrt on GoFlex Home
June 02, 2018 04:27AM
Thanks, bodhi.

I looked at the post but was not sure what the starting point was....

If I'm using a stock GoFlex Home unit what do I need to do first? I can ssh into the unit and know how to install ALARM but am not sure if that is what I need to do.
Re: OpenWrt on GoFlex Home
June 02, 2018 09:28AM
Do I need to use kwboot with uboot.2017.07-tld-1.goflexhome.bodhi.tar ?
Re: OpenWrt on GoFlex Home
June 02, 2018 04:05PM
balanga Wrote:
-------------------------------------------------------
> Do I need to use kwboot with
> uboot.2017.07-tld-1.goflexhome.bodhi.tar ?

Yes, you need to flash uboot.2017.07-tld-1.goflexhome.bodhi.tar as joerg's instruction stated.

Basically, you would install new u-boot, and Debian rootfs. And then install LEDE using that instruction. And if something about installing LEDE that's not clear, please post in that thread.

-bodhi
===========================
Forum Wiki
bodhi's corner
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: