Figured it out...... Bad Ground Connection. Re-soldered it and its working great!!! Now time to get this thing running.by erWill2 - uBoot
Thanks for the reply bodhi. Here are my params Serial Options Speed 115200 Data bits 8 Stop bits 1 Parity None Flow Control None I'v also tried with Flow Control - XON/XOFFby erWill2 - uBoot
Here is the interrupted log. U-Boot 1.1.4 (Oct 1 2011 - 12:21:35) Clou$ Engines 1.1.2 (3.4.27) PHYADDR=0 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006918B4 Soc: 88F6192 A1 (DDR2) CPU running @ 800Mhz L2 running @ 400Mhz SysClock = 200Mhz , TClock = 166Mhz DRAM CAS Latency = 3 tRP = 3 tRAS = 8 tRCD=3 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit widby erWill2 - uBoot
Hello, I decided to give hacking one of these a try. Its seems as though any command I send through putty is not getting executed. Uboot does recognize the interrupt but does nothing after. Any suggestions would be greatly appreciated. This is the bootlog without interrupting. Thanks! U-Boot 1.1.4 (Oct 1 2011 - 12:21:35) Cloud Engines 1.1.2 (3.4.27) PHYADDR=0 U-Boot code: 00600000 ->by erWill2 - uBoot