Every 10.0s: sensors faucon: Fri Apr 7 02:32:28 2023 gpio_fan-isa-0000 Adapter: ISA adapter fan1: 2500 RPM (min = 0 RPM, max = 5000 RPM) ALARM kirkwood_thermal-virtual-0 Adapter: Virtual device temp1: +53.6 C i use echo -n 1 > /sys/class/hwmon/hwmon0/pwm1_enableby BillyIT - Debian
Every 10.0s: sensors faucon: Wed Dec 31 16:03:41 1969 gpio_fan-isa-0000 Adapter: ISA adapter fan1: 0 RPM (min = 0 RPM, max = 5000 RPM) ALARM kirkwood_thermal-virtual-0 Adapter: Virtual device temp1: +52.1 C My 2 fans aren't working (i put the cables to cool down without remounting the box) they were working before on stock u-booby BillyIT - Debian
Every 10.0s: sensors faucon: Fri Apr 7 01:18:30 2023 gpio_fan-isa-0000 Adapter: ISA adapter fan1: 0 RPM (min = 0 RPM, max = 5000 RPM) ALARM kirkwood_thermal-virtual-0 Adapter: Virtual device temp1: +51.4 C i'm trying to monitored temperatureby BillyIT - Debian
OK let me know when you have time to make a new dtb. I'l ll try to put some fans to test if the nas can be upby BillyIT - Debian
No and I don't find anything in log. It will be difficult to diagnostic. I'll try to monitor it tomorrow to find how long it is. Maybe a security shutdown because no fans are connected for now until I can rebuild the nasby BillyIT - Debian
bodhi Wrote: ------------------------------------------------------- > Congrats! > > The system is running with SATA rootfs. > > root@debian:~# lsblk -o name,label > > NAME LABEL > sda > `-sda1 rootfs > sdd > |-sdd1 sata_rootfs > `-sdd2 > sde > |-sde1 > |-sde2 > `-sde3 > mtdblock0 > mtdblock1 > > >by BillyIT - Debian
ok, this is the boot : root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p Sending boot message. Please reboot the target...| Sending boot image... 0 % [......................................................................] 1 % [......................................................................] 3 % [...............................by BillyIT - Debian
root@debian:~# cat /boot/uEnv.txt ipaddr=192.168.10.200 serverip=192.168.10.161 netmask=255.255.255.0 gatewayip=192.168.10.1 mtdparts=mtdparts=spi0.0:1M(u-boot),-(data) set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=sata_rootfs rootdelay=10 $mtdparts earlyprintk=serial dtb_file=/boot/dts/kirkwood-ds413j.dtb ethaddr=52:3b:20: mkfs.ext3 on sdd1 label it sata_rootfs extraby BillyIT - Debian
root@debian:~# cat /proc/▒ __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |__by BillyIT - Debian
root@debian:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 1 29G 0 disk `-sda1 8:1 1 29G 0 part / sdd 8:48 0 931.5G 0 disk |-sdd1 8:49 0 100G 0 part `-sdd2 8:50 0 831.5G 0 part sde 8:64 0 931.5G 0 disk |-sde1 8:65 0 2.4G 0 part |-sde2 8:66 0 2G 0 part `-sde3 8:67 0 9by BillyIT - Debian
Bodhi, Good news, we have a shell again ! i just changed "chmod +x on the uEnv.txt and done : root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p Sending boot message. Please reboot the target...| Sending boot image... 0 % [......................................................................] 1 % [...........................by BillyIT - Debian
/boot/uEnv.txt : GNU nano 5.4 /media/billyit/rootfs/boot/uEnv.txt ipaddr=192.168.10.200 serverip=192.168.10.161 netmask=255.255.255.0 gatewayip=192.168.10.1 mtdparts=mtdparts=spi0.0:1M(u-boot),-(data) set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=1> dtb_file=/boot/dts/kirkwood-ds413j.dtb ethaddr=52:3b:20:xx:xx:xxby BillyIT - Debian
I had the /boot/uEnv.txt. So i deleted it and i make a new one, copy / paste the information no linux : root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p Sending boot message. Please reboot the target...- Sending boot image... 0 % [......................................................................] 1 % [..........................by BillyIT - Debian
Bodhi, i redo my usb key (i think the problem was on the uEnv.txt for now i dont have one because i erase all files and just untar the Debian 5.13.6 and put the DTB from the page 4) root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p Sending boot message. Please reboot the target...\ Sending boot image... 0 % [............................by BillyIT - Debian
Hi Bodhi, I tried two times to boot with the DTB on the fourth pages (normally it was the better one) root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p Sending boot message. Please reboot the target...- Sending boot image... 0 % [......................................................................] 1 % [............................by BillyIT - Debian
OK ill redo it. Is it better that hdd is without rootfs and os for now ?by BillyIT - Debian
Bodhi, I tried to boot on usb and it's not working. I'll try to redo my usb key. Maybe i make a mistake before when copying /boot... root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p Sending boot message. Please reboot the target...| Sending boot image... 0 % [..................................................................by BillyIT - Debian
Bodhi OK no problem. Go for that. I'll post tomorrow the log from usb boot. Ask me anything to test. Thanksby BillyIT - Debian
Hi Rayknight It s the stock u-boot error (its why it doesnt boot DSM anymore but we are trying to boot from new u-boot and to Debian) Thanks for your help rayknight Wrote: ------------------------------------------------------- > BillyIT Wrote: > > > > > > > > Reset IDE: ide_preinit failed > > device ide 0:1 > > ** Bad device ide 0 ** &gby BillyIT - Debian
Bodhi, I did post all the logs from the flash of u-boot to the problem that i goes to stock u-boot i tried without usb, only with all hdds. The sdd is done as i did with usb with kirkwood 5.x.x. I just copy usb /boot to hdd /boot to have the uEnv.txt from usb and last DTB for ds413j BillyIT Wrote: ------------------------------------------------------- > I tried to do this whereby BillyIT - Debian
Ok, no problem :) i put all the serial logs from hdd boot previously the problem for me is that : Reset IDE: ide_preinit failed device ide 0:1 ** Bad device ide 0 ** device ide 1:1 ** Bad device ide 1 ** device ide 2:1 ** Bad device ide 2 ** device ide 3:1 ** Bad device ide 3 ** loading uImage ... ** Bad device usb 0 ** loading uInitrd ... ** Bad device usb 0 ** loadingby BillyIT - Debian
i know some linux basic in /etc/fstab (on your linux kernel) you have the label rootfs that automount on / as my usb key and my "sdd1" has this label rootfs, it mount automatically. When i boot with usb, it boot all to the prompt and it's sdd1 that is mounted at / When i try the same without usb, it doesn't find any boot device... maybe something about ide reset notby BillyIT - Debian
I tried to do this where /mnt/boot is my sda1 usb key cp -a /mnt/boot/ /boot and then : root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p Sending boot message. Please reboot the target...| Sending boot image... 0 % [......................................................................] 1 % [...........................................by BillyIT - Debian
root@faucon:~# mount sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) udev on /dev type devtmpfs (rw,nosuid,relatime,size=245456k,nr_inodes=61364,mode=755) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,nodev,noexec,relatime,size=50140k,mode=755)by BillyIT - Debian
_________ |---disk1--------| |---disk2--------| |---disk3--------| |---disk4--------| |-motherbd----| ------------------- Disk1 is sdd Disk2 may be the sde (not sure because nothing special to know it)by BillyIT - Debian
Hi Bodhi, Just took the DTB on the page 4 and boot again (it boot and that make me happy because last boots were failing) root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p Sending boot message. Please reboot the target.../ Sending boot image... 0 % [......................................................................] 1 % [........by BillyIT - Debian
Hi Bodhi, Bad news, not working as expected. root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p Sending boot message. Please reboot the target.../ Sending boot image... 0 % [......................................................................] 1 % [......................................................................] 3 % [.....by BillyIT - Debian
Hi Bodhi, Sorry, i need to make it again all because i wasn't on this project for a while. If we can resume to make me do it easy : i'll recreate a new usb with last kernel and the last DTB you gave me (no need to embedded it to uImage or whatever) Recreate the uEnv.txt with latest version Do the same on the first disk and boot with the nsa u-boot, stop and find last commandby BillyIT - Debian
I saw the problem with mac address after the boot with the error :) stupid copy/pass; I'll try that tomorrow. Thanksby BillyIT - Debian
Hi Bodhi, I'm a bit confused. I'm trying to install new version but i'm stucked at this : root@Arc-170:/mnt/boot# ls -l total 141740 -rw-r--r-- 1 root root 183927 1 août 2021 config-5.13.6-kirkwood-tld-1 -rw-r--r-- 1 root root 195246 21 mars 23:31 config-6.2.7-kirkwood-tld-1 drwxr-xr-x 2 root root 4096 26 févr. 03:35 dts -rw-r--r-- 1 root root 9672252 3 mby BillyIT - Debian