Re: Linux Kernel 5.1.11 Kirkwood package and Debian rootfs July 02, 2019 12:14AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.1.11 Kirkwood package and Debian rootfs July 10, 2019 08:37AM |
Registered: 12 years ago Posts: 8 |
Re: Linux Kernel 5.1.11 Kirkwood package and Debian rootfs July 11, 2019 05:02AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.1.11 Kirkwood package and Debian rootfs August 18, 2019 03:43PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs August 25, 2019 05:56PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs August 27, 2019 01:09AM |
Registered: 6 years ago Posts: 56 |
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs August 27, 2019 10:57PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs August 31, 2019 03:24AM |
Registered: 5 years ago Posts: 10 |
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs August 31, 2019 05:24AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs August 31, 2019 05:43AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs August 31, 2019 02:15PM |
Registered: 5 years ago Posts: 10 |
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: kirkwood-cpufreq CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 5.0 us. hardware limits: 200 MHz - 800 MHz available frequency steps: 800 MHz, 200 MHz available cpufreq governors: powersave, ondemand, conservative, userspace, performance current policy: frequency should be within 200 MHz and 800 MHz. The governor "performance" may decide which speed to use within this range. current CPU frequency is 800 MHz (asserted by call to hardware).It's looks fine. And I find a thread about it.
[ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000013] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000072] Switching to timer-based delay loop, resolution 6ns [ 0.001196] Console: colour dummy device 80x30 [ 0.001274] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666)
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs September 02, 2019 08:27AM |
Registered: 5 years ago Posts: 10 |
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs September 02, 2019 09:54AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs September 28, 2019 08:56AM |
Registered: 7 years ago Posts: 12 |
U-Boot 2017.07-tld-2 (Dec 04 2017 - 02:00:45 -0800) Marvell-Sheevaplug SoC: Kirkwood 88F6281_A0 DRAM: 512 MiB WARNING: Caches not enabled NAND: 512 MiB MMC: MVEBU_MMC: 0 In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Sheevaplug> prinenv Unknown command 'prinenv' - try 'help' Sheevaplug> printenv arcNumber=2097 baudrate=115200 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if rui bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=mmc console=ttyS0,115200 device=0:1 devices=usb ide mmc disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-sheevaplug-esata.dtb ethact=egiga0 ethaddr=00:50:43:01:44:09 if_netconsole=ping $serverip ipaddr=192.168.0.231 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1c00000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then ee serverip=192.168.0.220 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_ready_retry=15 Environment size: 2901/131068 bytes Sheevaplug>
U-Boot 2017.07-tld-2 (Dec 04 2017 - 02:00:45 -0800) Marvell-Sheevaplug SoC: Kirkwood 88F6281_A0 DRAM: 512 MiB WARNING: Caches not enabled NAND: 512 MiB MMC: MVEBU_MMC: 0 In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Reset IDE: ide_preinit failed MMC rescan: current device # 0 initialized OK ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** Bad device usb 0 ** no IDE devices available Partition Map for MMC device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 249735168 6ba76dc6-01 83 loading envs from mmc 0 ... ** File not found /boot/uEnv.txt ** running scan_disk ... Scan device usb device usb 0:1 ** Bad device usb 0 ** device usb 1:1 ** Bad device usb 1 ** device usb 2:1 ** Bad device usb 2 ** device usb 3:1 ** Bad device usb 3 ** Scan device ide Reset IDE: ide_preinit failed device ide 0:1 ** Bad device ide 0 ** device ide 1:1 ** Bad device ide 1 ** device ide 2:1 ** Bad device ide 2 ** device ide 3:1 ** Bad device ide 3 ** Scan device mmc MMC rescan: current device # 0 initialized OK device mmc 0:1 1 bytes read in 13 ms (0 Bytes/s) Found bootable drive on mmc 0 loading uImage ... 4973925 bytes read in 239 ms (19.8 MiB/s) loading uInitrd ... 9713936 bytes read in 450 ms (20.6 MiB/s) loading DTB /boot/dts/kirkwood-sheevaplug-esata.dtb ... 10245 bytes read in 15 ms (667 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-5.2.9-kirkwood-tld-1 Created: 2019-09-28 13:32:04 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4973861 Bytes = 4.7 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-5.2.9-kirkwood-tld-1 Created: 2019-08-25 2:22:50 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 9713872 Bytes = 9.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Loading Kernel Image ... OK Loading Ramdisk to 0f6bc000, end 0ffff8d0 ... OK Loading Device Tree to 0f6b6000, end 0f6bb804 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Globalscale Technologies eSATA SheevaPlug [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200n8 earlyprintk [ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000][ T0] Memory: 504180K/524288K available (9216K kernel code, 868K rwdata, 3400K rodata, 1024K init, 301K bss, 20108K reserved, 0K cma-reserved) [ 0.000000][ T0] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000009][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.008602][ T0] Switching to timer-based delay loop, resolution 5ns [ 0.015978][ T0] Console: colour dummy device 80x30 [ 0.021226][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.032551][ T0] pid_max: default: 32768 minimum: 301 [ 0.038263][ T0] LSM: Security Framework initializing [ 0.043825][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051230][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.059980][ T0] *** VALIDATE proc *** [ 0.064267][ T0] *** VALIDATE cgroup1 *** [ 0.068575][ T0] *** VALIDATE cgroup2 *** [ 0.073005][ T0] CPU: Testing write buffer coherency: ok [ 0.080319][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.087505][ T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2 [ 0.093706][ T1] rcu: Hierarchical SRCU implementation. [ 0.102487][ T1] devtmpfs: initialized [ 0.111439][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.122104][ T1] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.129254][ T1] xor: measuring software checksum speed [ 0.228624][ T1] arm4regs : 1042.400 MB/sec [ 0.328625][ T1] 8regs : 650.400 MB/sec [ 0.428628][ T1] 32regs : 945.600 MB/sec [ 0.433541][ T1] xor: using function: arm4regs (1042.400 MB/sec) [ 0.439875][ T1] prandom: seed boundary self test passed [ 0.449697][ T1] prandom: 100 self tests passed [ 0.454519][ T1] pinctrl core: initialized pinctrl subsystem [ 0.461888][ T1] NET: Registered protocol family 16 [ 0.467538][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.475988][ T1] audit: initializing netlink subsys (disabled) [ 0.483414][ T14] audit: type=2000 audit(0.470:1): state=initialized audit_enabled=0 res=1 [ 0.492041][ T1] cpuidle: using governor ladder [ 0.496932][ T1] cpuidle: using governor menu [ 0.502090][ T1] Feroceon L2: Enabling L2 [ 0.506421][ T1] Feroceon L2: Cache support initialised. [ 0.517908][ T1] No ATAGs? [ 2.568609][ C0] random: fast init done [ 6.482588][ T71] alg: No test for lzo-rle (lzo-rle-generic) [ 6.489135][ T73] alg: No test for lzo-rle (lzo-rle-scomp) [ 6.668921][ T1] raid6: int32x8 gen() 127 MB/s [ 6.839025][ T1] raid6: int32x8 xor() 86 MB/s [ 7.008846][ T1] raid6: int32x4 gen() 129 MB/s [ 7.178880][ T1] raid6: int32x4 xor() 83 MB/s [ 7.348738][ T1] raid6: int32x2 gen() 132 MB/s [ 7.518914][ T1] raid6: int32x2 xor() 94 MB/s [ 7.689168][ T1] raid6: int32x1 gen() 100 MB/s [ 7.858884][ T1] raid6: int32x1 xor() 68 MB/s [ 7.863874][ T1] raid6: using algorithm int32x2 gen() 132 MB/s [ 7.870011][ T1] raid6: .... xor() 94 MB/s, rmw enabled [ 7.875523][ T1] raid6: using intx1 recovery algorithm [ 7.881206][ T1] vgaarb: loaded [ 7.885120][ T1] SCSI subsystem initialized [ 7.890112][ T1] usbcore: registered new interface driver usbfs [ 7.896379][ T1] usbcore: registered new interface driver hub [ 7.902535][ T1] usbcore: registered new device driver usb [ 7.908479][ T1] pps_core: LinuxPPS API ver. 1 registered [ 7.914183][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 7.924086][ T1] PTP clock support registered [ 7.929989][ T1] clocksource: Switched to clocksource orion_clocksource [ 8.973383][ T1] VFS: Disk quotas dquot_6.6.0 [ 8.978103][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.995649][ T1] NET: Registered protocol family 2 [ 9.001580][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 9.010066][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 9.017892][ T1] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 9.025150][ T1] TCP: Hash tables configured (established 4096 bind 4096) [ 9.032366][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 9.038935][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 9.046182][ T1] NET: Registered protocol family 1 [ 9.051925][ T1] RPC: Registered named UNIX socket transport module. [ 9.058575][ T1] RPC: Registered udp transport module. [ 9.064078][ T1] RPC: Registered tcp transport module. [ 9.069500][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.076697][ T1] PCI: CLS 0 bytes, default 32 [ 9.081708][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 9.090131][ T1] Initialise system trusted keyrings [ 9.095337][ T1] Key type blacklist registered [ 9.100319][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 9.107562][ T1] zbud: loaded [ 9.111968][ T1] NFS: Registering the id_resolver key type [ 9.117767][ T1] Key type id_resolver registered [ 9.122778][ T1] Key type id_legacy registered [ 9.127520][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 9.134977][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 9.142372][ T1] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc. [ 9.150397][ T1] fuse: init (API version 7.31) [ 9.155499][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 9.162890][ T1] orangefs_init: module version upstream loaded [ 9.169014][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 9.180758][ T1] async_tx: api initialized (async) [ 9.185839][ T1] Key type asymmetric registered [ 9.190717][ T1] Asymmetric key parser 'x509' registered [ 9.196365][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 9.205950][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 9.216121][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 9.280795][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 9.290934][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 9.350793][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 9.361067][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 9.369350][ T1] printk: console [ttyS0] disabled [ 9.374473][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A [ 9.384268][ T1] printk: console [ttyS0] enabled [ 9.384268][ T1] printk: console [ttyS0] enabled [ 9.394107][ T1] printk: bootconsole [earlycon0] disabled [ 9.394107][ T1] printk: bootconsole [earlycon0] disabled [ 9.413156][ T1] loop: module loaded [ 9.417575][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 9.426011][ T1] scsi host0: sata_mv [ 9.430508][ T1] scsi host1: sata_mv [ 9.434670][ T1] ata1: SATA max UDMA/133 irq 32 [ 9.439485][ T1] ata2: SATA max UDMA/133 irq 32 [ 9.445333][ T1] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 9.452534][ T1] nand: Samsung NAND 512MiB 3,3V 8-bit [ 9.457876][ T1] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 9.466212][ T1] Scanning device for bad blocks [ 9.747018][ T1] Bad eraseblock 3602 at 0x00001c240000 [ 9.782886][ T112] ata1: SATA link down (SStatus 0 SControl F300) [ 9.796622][ T1] 3 fixed-partitions partitions found on MTD device orion_nand [ 9.804097][ T1] Creating 3 MTD partitions on "orion_nand": [ 9.809974][ T1] 0x000000000000-0x000000100000 : "u-boot" [ 9.817161][ T1] 0x000000100000-0x000000500000 : "uImage" [ 9.824130][ T1] 0x000000500000-0x000020000000 : "root" [ 9.833903][ T1] libphy: Fixed MDIO Bus: probed [ 9.839529][ T1] libphy: orion_mdio_bus: probed [ 9.845451][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 9.853517][ T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set [ 10.141583][ T114] ata2: SATA link down (SStatus 0 SControl F300) [ 10.580657][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:01:44:09 [ 10.590264][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.597541][ T1] ehci-pci: EHCI PCI platform driver [ 10.602785][ T1] ehci-orion: EHCI orion driver [ 10.607697][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 10.613976][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 10.622555][ T1] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 10.650029][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 10.657034][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 10.666071][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.674050][ T1] usb usb1: Product: EHCI Host Controller [ 10.679653][ T1] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd [ 10.687015][ T1] usb usb1: SerialNumber: f1050000.ehci [ 10.693044][ T1] hub 1-0:1.0: USB hub found [ 10.697550][ T1] hub 1-0:1.0: 1 port detected [ 10.702939][ T1] usbcore: registered new interface driver usb-storage [ 10.710101][ T1] mousedev: PS/2 mouse device common for all mice [ 10.716966][ T1] rtc-mv f1010300.rtc: registered as rtc0 [ 10.722777][ T1] i2c /dev entries driver [ 10.727637][ T1] device-mapper: uevent: version 1.0.3 [ 10.733315][ T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 10.742935][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 10.750265][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 10.757619][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 10.765066][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 10.771919][ T1] device-mapper: raid: Loading target version 1.14.0 [ 10.779415][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 10.785894][ T1] drop_monitor: Initializing network drop monitor service [ 10.793232][ T1] NET: Registered protocol family 17 [ 10.798638][ T1] Key type dns_resolver registered [ 10.804452][ T1] registered taskstats version 1 [ 10.809264][ T1] Loading compiled-in X.509 certificates [ 10.815528][ T1] zswap: loaded using pool lzo/zbud [ 10.835772][ T1] Key type big_key registered [ 10.843774][ T1] Key type encrypted registered [ 10.850616][ T1] rtc-mv f1010300.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) [ 10.860409][ T1] md: Waiting for all devices to be available before autodetect [ 10.867931][ T1] md: If you don't use raid, use raid=noautodetect [ 10.875044][ T1] md: Autodetecting RAID arrays. [ 10.879861][ T1] md: autorun ... [ 10.883435][ T1] md: ... autorun DONE. [ 10.887672][ T1] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 10.895950][ T1] Please append a correct "root=" boot option; here are the available partitions: [ 10.905123][ T1] 1f00 1024 mtdblock0 [ 10.905127][ T1] (driver?) [ 10.913143][ T1] 1f01 4096 mtdblock1 [ 10.913146][ T1] (driver?) [ 10.921159][ T1] 1f02 519168 mtdblock2 [ 10.921162][ T1] (driver?) [ 10.929124][ T1] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 10.938125][ T1] CPU: 0 PID: 1 Comm: swapper Not tainted 5.2.9-kirkwood-tld-1 #1 [ 10.945809][ T1] Hardware name: Marvell Kirkwood (Flattened Device Tree) [ 10.952830][ T1] [<c010f6ac>] (unwind_backtrace) from [<c010bb00>] (show_stack+0x10/0x14) [ 10.961322][ T1] [<c010bb00>] (show_stack) from [<c0119fa0>] (panic+0xe0/0x30c) [ 10.968942][ T1] [<c0119fa0>] (panic) from [<c0e01628>] (mount_block_root+0x1bc/0x2a4) [ 10.977169][ T1] [<c0e01628>] (mount_block_root) from [<c0e017f8>] (mount_root+0xe8/0x154) [ 10.985739][ T1] [<c0e017f8>] (mount_root) from [<c0e019b0>] (prepare_namespace+0x14c/0x18c) [ 10.994486][ T1] [<c0e019b0>] (prepare_namespace) from [<c0e011c8>] (kernel_init_freeable+0x270/0x2dc) [ 11.004106][ T1] [<c0e011c8>] (kernel_init_freeable) from [<c09dcee0>] (kernel_init+0x8/0x10c) [ 11.013024][ T1] [<c09dcee0>] (kernel_init) from [<c01010e0>] (ret_from_fork+0x14/0x34) [ 11.021327][ T1] Exception stack(0xdf48bfb0 to 0xdf48bff8) [ 11.027101][ T1] bfa0: 00000000 00000000 00000000 00000000 [ 11.036015][ T1] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 11.044925][ T1] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 11.052276][ T1] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs September 28, 2019 09:21AM |
Registered: 7 years ago Posts: 12 |
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs September 28, 2019 05:10PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.2.9 Kirkwood package and Debian rootfs October 06, 2019 12:58AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.3.2 Kirkwood package and Debian rootfs October 06, 2019 04:31AM |
Registered: 5 years ago Posts: 27 |
Re: Linux Kernel 5.3.2 Kirkwood package and Debian rootfs October 06, 2019 05:16AM |
Admin Registered: 13 years ago Posts: 18,821 |
oliv
Re: Linux Kernel 5.3.2 Kirkwood package and Debian rootfs October 09, 2019 02:01AM |
Re: Linux Kernel 5.3.2 Kirkwood package and Debian rootfs October 09, 2019 04:02AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.4.2 Kirkwood package and Debian rootfs December 14, 2019 11:30PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.4.2 Kirkwood package and Debian rootfs December 16, 2019 02:20PM |
Registered: 12 years ago Posts: 8 |
Re: Linux Kernel 5.4.2 Kirkwood package and Debian rootfs December 16, 2019 03:57PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.4.2 Kirkwood package and Debian rootfs December 21, 2019 09:09AM |
Registered: 4 years ago Posts: 1 |
Re: Linux Kernel 5.5.1 Kirkwood package and Debian rootfs February 03, 2020 09:51PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.5.1 Kirkwood package and Debian rootfs April 20, 2020 09:56PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.5.1 Kirkwood package and Debian rootfs June 14, 2020 07:34PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Linux Kernel 5.5.1 Kirkwood package and Debian rootfs June 15, 2020 01:27PM |
Registered: 4 years ago Posts: 57 |
Re: Linux Kernel 5.5.1 Kirkwood package and Debian rootfs June 15, 2020 04:02PM |
Admin Registered: 13 years ago Posts: 18,821 |