Re: Debian on Synology DS413J April 20, 2023 02:05PM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J April 21, 2023 05:09PM |
Admin Registered: 13 years ago Posts: 18,898 |
Re: Debian on Synology DS413J April 23, 2023 05:16PM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J April 24, 2023 06:54AM |
Registered: 1 year ago Posts: 178 |
Marvell>> setenv ipaddr 192.168.10.200 Marvell>> setenv serverip 192.168.10.244 Marvell>> setenv netmask 255.255.255.0 Marvell>> tftpboot 0xd00000 zImage Using egiga0 device TFTP from server 192.168.10.244; our IP address is 192.168.10.200 Filename 'zImage'. Load address: 0xd00000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ############################################ done Bytes transferred = 1551624 (17ad08 hex) Marvell>> tftpboot 0x800000 rd.bin Using egiga0 device TFTP from server 192.168.10.244; our IP address is 192.168.10.200 Filename 'rd.bin'. Load address: 0x800000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################### done Bytes transferred = 3503403 (35752b hex) Marvell>> bootm 0xd00000 0x800000 ## Booting image at 00d00000 ... Image Name: Linux-2.6.32.12 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1551560 Bytes = 1.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 00800000 ... Image Name: synology_88f6282_413j 8754 Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3503339 Bytes = 3.3 MB Load Address: 00800000 Entry Point: 00800000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Linux version 2.6.32.12 (root@build4) (gcc version 4.6.4 (Marvell GCC release 20150204-c4af733b 64K MAXPAGESIZE ALIGN CVE-2015-0235) ) #8754 Thu Apr 20 02:22:47 CST 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Synology 6282 board [ 0.000000] Using UBoot passing parameters structure [ 0.000000] Sys Clk = 200000000, Tclk = 166666667 [ 0.000000] Synology Board ID: 26 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 ip=off initrd=0x00800040,8M root=/dev/md0 rw syno_hw_version=DS413jv10 ihd_num=4 netif_num=1 flash_size=8 [ 0.000000] Synology Hardware Version: DS413jv10-j [ 0.000000] Internal HD num: 4 [ 0.000000] Internal netif num: 1 [ 0.000000] Flash Memory Size: 8 MB [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 502784KB available (3652K code, 519K data, 124K init, 0K highmem) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:128 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop... 1589.24 BogoMIPS (lpj=7946240) [ 0.240000] Mount-cache hash table entries: 512 [ 0.240000] CPU: Testing write buffer coherency: ok [ 0.240000] devtmpfs: initialized [ 0.240000] xor: measuring software checksum speed [ 0.290000] arm4regs : 1448.800 MB/sec [ 0.340000] 8regs : 869.200 MB/sec [ 0.390000] 32regs : 1122.000 MB/sec [ 0.390000] xor: using function: arm4regs (1448.800 MB/sec) [ 0.390000] NET: Registered protocol family 16 [ 0.390000] Feroceon L2: Enabling L2 [ 0.390000] Feroceon L2: Cache support initialised, in WT override mode. [ 0.410000] [ 0.410000] CPU Interface [ 0.410000] ------------- [ 0.410000] SDRAM_CS0 ....base 00000000, size 512MB [ 0.410000] SDRAM_CS1 ....disable [ 0.410000] SDRAM_CS2 ....disable [ 0.410000] SDRAM_CS3 ....disable [ 0.410000] PEX0_MEM ....base e0000000, size 128MB [ 0.410000] PEX0_IO ....base f2000000, size 1MB [ 0.410000] PEX1_MEM ....base e8000000, size 128MB [ 0.410000] PEX1_IO ....base f2100000, size 1MB [ 0.410000] INTER_REGS ....base f1000000, size 1MB [ 0.410000] NFLASH_CS ....base fa000000, size 2MB [ 0.410000] SPI_CS ....base f4000000, size 16MB [ 0.410000] BOOT_ROM_CS ....no such [ 0.410000] DEV_BOOTCS ....no such [ 0.410000] CRYPT_ENG ....base f0000000, size 2MB [ 0.410000] Detected Tclk 200000000 and SysClk 533333333 [ 0.410000] Apply DS 413j GPIO [ 0.410000] Synology 6282 DS411 GPIO Init [ 0.410000] PCIe link is enable, apply PCIe workaround [ 0.910000] PEX0 interface detected Link X4 [ 1.410000] PEX1 interface detected no Link. [ 1.410000] PCI: bus0: Fast back to back transfers disabled [ 1.410000] PCI: bus1: Fast back to back transfers enabled [ 1.420000] bio: create slab <bio-0> at 0 [ 1.420000] vgaarb: loaded [ 1.420000] SCSI subsystem initialized [ 1.590000] raid6: int32x1 126 MB/s [ 1.760000] raid6: int32x2 185 MB/s [ 1.930000] raid6: int32x4 180 MB/s [ 2.100000] raid6: int32x8 193 MB/s [ 2.100000] raid6: using algorithm int32x8 (193 MB/s) [ 2.100000] Switching to clocksource kw_clocksource [ 2.100000] NET: Registered protocol family 2 [ 2.100000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 2.100000] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 2.100000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 2.100000] TCP: Hash tables configured (established 16384 bind 16384) [ 2.100000] TCP reno registered [ 2.100000] NET: Registered protocol family 1 [ 2.100000] RPC: Registered udp transport module. [ 2.100000] RPC: Registered tcp transport module. [ 2.100000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.100000] Trying to unpack rootfs image as initramfs... [ 5.150000] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 5.180000] Freeing initrd memory: 8192K [ 5.180000] XOR registered 4 channels [ 5.180000] XOR 2nd invalidate WA enabled [ 5.180000] VFS: Disk quotas dquot_6.5.2 [ 5.180000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.180000] msgmni has been set to 998 [ 5.180000] alg: No test for md5 (md5-generic) [ 5.180000] alg: No test for des (des-generic) [ 5.180000] alg: No test for des3_ede (des3_ede-generic) [ 5.180000] alg: No test for stdrng (krng) [ 5.180000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 5.180000] io scheduler noop registered [ 5.180000] io scheduler anticipatory registered (default) [ 5.190000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 5.190000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 5.200000] console [ttyS0] enabled [ 5.210000] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A [ 5.220000] brd: module loaded [ 5.220000] sata_mv 0000:00:01.0: version 1.28 [ 5.230000] PCI: enabling device 0000:00:01.0 (0140 -> 0143) [ 5.230000] sata_mv 0000:00:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx [ 5.240000] scsi0 : sata_mv [ 5.240000] scsi1 : sata_mv [ 5.250000] scsi2 : sata_mv [ 5.250000] scsi3 : sata_mv [ 5.250000] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 9 [ 5.260000] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 9 [ 5.270000] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 9 [ 5.270000] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 9 [ 8.790000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.790000] ata1.00: ATA-9: SM59XT2A-10-00K21011, 20210308, max UDMA/100 [ 8.800000] ata1.00: 2096640 sectors, multi 1: LBA [ 8.800000] ata1.00: configured for UDMA/100 [ 8.810000] ata1.00: Find SSD disks. [SM59XT2A-10-00K21011] [ 8.810000] scsi 0:0:0:0: Direct-Access ATA SM59XT2A-10-00K21011 2021 PQ: 0 ANSI: 5 [ 8.820000] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB) [ 8.830000] sd 0:0:0:0: [sda] Write Protect is off [ 8.840000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8.850000] sda: unknown partition table [ 8.850000] sd 0:0:0:0: [sda] Attached SCSI disk [ 11.850000] Delay 5 seconds to wait for disk 2 ready. [ 17.200000] ata2: SATA link down (SStatus 0 SControl 300) [ 20.200000] Delay 5 seconds to wait for disk 3 ready. [ 25.540000] ata3: SATA link down (SStatus 0 SControl 300) [ 28.540000] Delay 5 seconds to wait for disk 4 ready. [ 33.880000] ata4: SATA link down (SStatus 0 SControl 300) [ 33.880000] sata_mv sata_mv.0: version 1.28 [ 33.880000] sata_mv sata_mv.0: slots 32 ports 2 [ 33.890000] scsi4 : sata_mv [ 33.890000] scsi5 : sata_mv [ 33.900000] ata5: SATA max UDMA/133 irq 21 [ 33.900000] ata6: SATA max UDMA/133 irq 21 [ 34.250000] ata5: SATA link down (SStatus 0 SControl F300) [ 34.600000] ata6: SATA link down (SStatus 0 SControl F300) [ 34.600000] physmap platform flash device: 00400000 at f8000000 [ 34.610000] SPI Serial flash detected @ 0xf8000000, 8192KB (128sec x 64KB) [ 34.620000] Searching for RedBoot partition table in SYNOMTD-0 at offset 0x7f0000 [ 34.630000] 6 RedBoot partitions found on MTD device SYNOMTD-0 [ 34.640000] SYNOMTD flash bank 0: Using RedBoot partition definition [ 34.650000] Creating 6 MTD partitions on "SYNOMTD-0": [ 34.650000] 0x000000000000-0x000000090000 : "RedBoot" [ 34.660000] 0x000000090000-0x000000390000 : "zImage" [ 34.660000] 0x000000390000-0x0000007d0000 : "rd.gz" [ 34.670000] 0x0000007d0000-0x0000007e0000 : "vendor" [ 34.670000] vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0. [ 34.680000] vender Mac2 checksum error ucSum:0x00 Buf:0x00 Sum:0. [ 34.690000] vender Mac3 checksum error ucSum:0x00 Buf:0x00 Sum:0. [ 34.690000] serial number='MBKVN93031' [ 34.690000] 0x0000007e0000-0x0000007f0000 : "RedBoot Config" [ 34.700000] 0x0000007f0000-0x000000800000 : "FIS directory" [ 34.710000] SPI Serial flash detected @ 0xf4000000, 8192KB (128sec x 64KB) [ 34.720000] cmdlinepart partition parsing not available [ 34.720000] Loading Marvell Ethernet Driver: [ 34.730000] o Cached descriptors in DRAM [ 34.730000] o DRAM SW cache-coherency [ 34.740000] o 2 Giga ports supported [ 34.740000] o Single RX Queue support - ETH_DEF_RXQ=0 [ 34.750000] o Single TX Queue support - ETH_DEF_TXQ=0 [ 34.750000] o TCP segmentation offload (TSO) supported [ 34.760000] o Receive checksum offload supported [ 34.760000] o Transmit checksum offload supported [ 34.770000] o SKB Recycle supported - (Enabled) [ 34.770000] o Rx descripors: q0=128 [ 34.770000] o Tx descripors: q0=532 [ 34.780000] o Loading network interface(s): [ 34.780000] o register under mv88fx_eth platform [ 34.790000] o eth0, ifindex = 2, GbE port = 0 [ 34.790000] o eth0, phy chipid = 1410e90, Support WOL = 32 [ 34.800000] [ 34.800000] md: linear personality registered for level -1 [ 34.810000] md: raid0 personality registered for level 0 [ 34.810000] md: raid1 personality registered for level 1 [ 34.820000] md: raid10 personality registered for level 10 [ 34.820000] md: raid6 personality registered for level 6 [ 34.830000] md: raid5 personality registered for level 5 [ 34.830000] md: raid4 personality registered for level 4 [ 34.840000] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 34.850000] cpuidle: using governor ladder [ 34.850000] TCP cubic registered [ 34.860000] NET: Registered protocol family 17 [ 34.860000] NET: Registered protocol family 15 [ 34.860000] registered taskstats version 1 [ 34.870000] md: Waiting for all devices to be available before autodetect [ 34.880000] md: If you don't use raid, use raid=noautodetect [ 34.880000] md: Autodetecting RAID arrays. [ 34.890000] md: Scanned 0 and added 0 devices. [ 34.890000] md: autorun ... [ 34.890000] md: ... autorun DONE. [ 34.900000] RAMDISK: lzma image found at block 0 [ 38.170000] VFS: Mounted root (ext2 filesystem) on device 1:0. START /linuxrc.syno Insert basic USB modules... :: Loading module usbcore[ 38.430000] usbcore: registered new interface driver usbfs [ 38.430000] usbcore: registered new interface driver hub [ 38.460000] usbcore: registered new interface driver ethub [ 38.480000] usbcore: registered new device driver usb ... [ OK ] :: Loading module ehci-hcd[ 38.520000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 38.530000] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 38.540000] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 38.570000] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 38.590000] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 38.590000] usb usb1: configuration #1 chosen from 1 choice [ 38.620000] hub 1-0:1.0: USB hub found [ 38.620000] hub 1-0:1.0: 1 port detected ... [ OK ] :: Loading module ohci-hcd[ 38.720000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ... [ OK ] :: Loading module xhci-hcd ... [ OK ] Insert net driver(Mindspeed only)... [ 38.880000] ds413j_synobios: module license 'Synology Inc.' taints kernel. [ 38.890000] Disabling lock debugging due to kernel taint [ 38.950000] correction with 0x0f [ 39.000000] 2022-4-30 4:39:22 UTC [ 39.000000] synobios: load, major number 201 [ 39.010000] Brand: Synology [ 39.010000] Model: DS-413j [ 39.010000] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 39.020000] synobios cpu_arch proc entry initialized [ 39.030000] synobios crypto_hw proc entry initialized [ 39.030000] synobios syno_platform proc entry initialized [ 39.040000] usb 1-1: new high speed USB device using orion-ehci and address 2 Starting /usr/syno/bin/synocfgen... /usr/syno/bin/synocfgen returns 0 [ 39.070000] synobios: unload Partition Version=0 Partition layout is not DiskStation style. NOT EXECUTE /sbin/e2fsck. Mounting /dev/md0 /tmpRoot mount: lseek failed, msg:Invalid argument mount: mounting /dev/md0 on /tmpRoot failed: No such device mount /dev/md0 fail, returns Exit on error [3] no init exists... Sat Apr 30 04:39:22 UTC 2022 sys /sys sysfs rw,relatime 0 0 /dev/root.old / ext2 rw,relatime,errors=continue,user_xattr 0 0 none /dev devtmpfs rw,relatime,size=251528k,nr_inodes=62882,mode=755 0 0 proc /proc proc rw,relatime 0 0 linuxrc.syno failed on 3 starting pid 611, tty '': '/etc/rc' [ 39.190000] Got empty serial number. Generate serial number from product. [ 39.190000] usb 1-1: configuration #1 chosen from 1 choice [ 39.210000] hub 1-1:1.0: USB hub found [ 39.210000] hub 1-1:1.0: 4 ports detected :: Starting /etc/rc :: Mounting procfs ... [ OK ] :: Mounting tmpfs ... [ OK ] :: Mounting devtmpfs ... [ OK ] :: Mounting devpts ... [ OK ] :: Mounting sysfs ... [ OK ] mdadm: error opening /dev/md1: No such file or directory rc: Use all internal disk as swap. swapon: can't stat '/dev/md1': No such file or directory :: Loading module fat ... [ OK ] :: Loading module vfat ... [ OK ] :: Mounting usbfs ... [ OK ] :: Loading module sky2[ 39.970000] sky2 driver version 1.25 ... [ OK ] :: Loading module synobios[ 40.070000] correction with 0x0f [ 40.130000] 2022-4-30 4:39:23 UTC [ 40.130000] synobios: load, major number 201 [ 40.130000] Brand: Synology [ 40.140000] Model: DS-413j [ 40.140000] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 40.150000] synobios cpu_arch proc entry initialized [ 40.150000] synobios crypto_hw proc entry initialized [ 40.160000] synobios syno_platform proc entry initialized ... [ OK ] [ 40.220000] usb 1-1.2: new high speed USB device using orion-ehci and address 3 [ 40.330000] usb 1-1.2: configuration #1 chosen from 1 choice cat: can't open '/proc/sys/kernel/syno_skip_vender_mac_interfaces': No such file[ 40.460000] eth0: mac address changed or directory [ 42.500000] eth0: link down [ 42.500000] eth0: started udhcpc (v1.16.1) started eth0 Link encap:Ethernet HWaddr 00:11:32:1B:92:C7 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:532 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:11 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) :: Starting syslogd ... [ OK ] :: Starting scemd [ 43.670000] eth0: link up, full duplex, speed 1 Gbps :: Starting services in background Starting findhostd in flash_rd... Starting services in flash_rd... Running /usr/syno/etc/rc.d/J01httpd.sh... Starting httpd:80 in flash_rd... Starting httpd:5000 in flash_rd... Running /usr/syno/etc/rc.d/J03ssdpd.sh... /usr/bin/minissdpd -i eth0 (15): upnp:rootdevice (51): uuid:upnp_SynologyNAS-0011321b92c7::upnp:rootdevice (54): Synology/synology_88f6282_413j/6.0-8754/192.168.10.254 (47): http://192.168.10.254:5000/description-eth0.xml Connected. done. /usr/syno/bin/reg_ssdp_service 192.168.10.254 0011321b92c7 6.0-8754 synology_88f6282_413j eth0 Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh... Starting synoagentregisterd... Running /usr/syno/etc/rc.d/J30DisableNCQ.sh... Running /usr/syno/etc/rc.d/J80ADTFanControl.sh... Running /usr/syno/etc/rc.d/J98nbnsd.sh... Starting nbnsd... Running /usr/syno/etc/rc.d/J99avahi.sh... Starting Avahi mDNS/DNS-SD Daemon cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf :: Loading module usb-storage[ 50.360000] Initializing USB Mass Storage driver... [ 50.370000] scsi6 : SCSI emulation for USB Mass Storage devices [ 50.380000] usbcore: registered new interface driver usb-storage [ 50.390000] USB Mass Storage support registered. ... [ OK ] ============ Date ============ Sat Apr 30 04:39:33 UTC 2022 ================Sat Apr 30 04:39:34 2022 DiskStation login: [ 55.380000] scsi 6:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6 [ 55.400000] sd 6:0:0:0: [sdq] 60751872 512-byte logical blocks: (31.1 GB/28.9 GiB) [ 55.430000] sd 6:0:0:0: [sdq] Write Protect is off [ 55.440000] sd 6:0:0:0: [sdq] Assuming drive cache: write through [ 55.470000] sd 6:0:0:0: [sdq] Assuming drive cache: write through [ 55.470000] sdq: sdq1 [ 55.510000] sd 6:0:0:0: [sdq] Assuming drive cache: write through [ 55.520000] sd 6:0:0:0: [sdq] Attached SCSI removable disk
Re: Debian on Synology DS413J May 05, 2023 05:23PM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J May 06, 2023 02:12AM |
Admin Registered: 13 years ago Posts: 18,898 |
Re: Debian on Synology DS413J May 06, 2023 05:02PM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J August 21, 2023 03:07AM |
Registered: 1 year ago Posts: 178 |
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** ** MARVELL BOARD: Synology Disk Station LE U-Boot 1.1.4 (May 22 2012 - 19:52:31) Marvell version: 3.5.9 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 0068B3D4 Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz SysClock = 533Mhz , TClock = 200Mhz DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7 DRAM CS[0] base 0x00000000 size 512MB DRAM Total size 512MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done Using default environment [8192kB@f8000000] Flash: 8 MB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled USB 0: host mode PEX 0: PCI Express Root Complex Interface PEX interface detected Link X1 PEX 1: interface detected no Link. Synology Model: DS413j Fan Status: Good
Re: Debian on Synology DS413J August 21, 2023 12:57PM |
Admin Registered: 13 years ago Posts: 18,898 |
Re: Debian on Synology DS413J August 21, 2023 03:44PM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J August 22, 2023 12:42PM |
Admin Registered: 13 years ago Posts: 18,898 |
Re: Debian on Synology DS413J August 25, 2023 07:30AM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J May 15, 2024 07:23AM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J May 15, 2024 02:26PM |
Admin Registered: 13 years ago Posts: 18,898 |
Quote
today, i have a Marvell>> prompt
Quote
I'm back and if you can help, we could possibly make it work totally because.... I bought the exact copy to have a reference.
printenvDo the same on the good box,
printenv
Re: Debian on Synology DS413J May 16, 2024 01:25AM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J May 21, 2024 02:27AM |
Registered: 1 year ago Posts: 178 |
# picocom -b 115200 /dev/ttyUSB0 picocom v3.1 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no hangup is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, logfile is : none initstring : none exit_after is : not set exit is : no Type [C-a] [C-h] to see available commands Terminal ready
Re: Debian on Synology DS413J May 21, 2024 01:19PM |
Admin Registered: 13 years ago Posts: 18,898 |
Re: Debian on Synology DS413J May 28, 2024 01:47AM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J June 10, 2024 01:43AM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J June 10, 2024 02:19PM |
Admin Registered: 13 years ago Posts: 18,898 |
Re: Debian on Synology DS413J June 10, 2024 05:39PM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J June 11, 2024 03:14AM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J June 11, 2024 02:20PM |
Admin Registered: 13 years ago Posts: 18,898 |
Re: Debian on Synology DS413J June 11, 2024 03:04PM |
Registered: 1 year ago Posts: 178 |
Re: Debian on Synology DS413J June 11, 2024 05:00PM |
Registered: 1 year ago Posts: 96 |