new kernel package ready to use

gorgone

Re: new kernel package ready to use
January 17, 2011 12:45PM

Registered: 14 years ago
Posts: 166

adelias Wrote:
-------------------------------------------------------
> Does 2.6.37 include nfs support.

yes 2/3/4

Reply Quote

ingmar_k

Re: new kernel package ready to use
January 17, 2011 01:33PM

I could compile without any patches, too. But I couldn't test my kernel, yet. So I'm not 100% sure if it's absolutely alright.

Reply Quote

punter

Re: new kernel package ready to use
January 18, 2011 06:27AM

Registered: 13 years ago
Posts: 4

2.6.37 installed using instructions on first post and now I have a flashing green light that resembles a heartbeat! It's scaring me ;-)
vielen Dank gorgone! Why don't you put a paypal donate on your homepage?

Reply Quote

ARJunior

Re: new kernel package ready to use
January 18, 2011 10:50AM

Registered: 14 years ago
Posts: 8

gorgone Wrote:
-------------------------------------------------------
> ARJunior Wrote:
> --------------------------------------------------
> -----
> > @Gorgone
> >
> > Is it mandatory to set arcNumber to 2998 to use
> > this new kernel ?
> > Thanks.
>
>
> no its a ready to use kernel

Thank you ;)

Reply Quote

StefanV3

Re: new kernel package ready to use
January 18, 2011 12:25PM

Registered: 14 years ago
Posts: 17

Hi,

@ Gorgone

Hab ich was vepaßt??? Hast Du eine neuen Kernel für das Dockstar veröffentlicht ? Weil im ersten Post steht immernoch was von 2.6.35.4 und nicht 2.6.37?

*Edit*

OK, hab den Post mit dem Link gefunden. Aber es wär durchaus Sinnvoll, den ersten Post des Beitrags zu aktualisieren...

Grüße

Do i have missed something? Did you release your ne Kernel for Dockstar? Because in the first post of this thread the kernel version is 2.6.35.4 and not 2.6.37?

*edit*

Ok, hve found the post with the link. But i think it will be good, to update the first post in thois thread...

Greetings

StefanV3

Edited 1 time(s). Last edit at 01/18/2011 12:37PM by StefanV3.

Reply Quote

StefanV3

Re: new kernel package ready to use
January 18, 2011 01:07PM

Registered: 14 years ago
Posts: 17

punter Wrote:
-------------------------------------------------------
> 2.6.37 installed using instructions on first post
> and now I have a flashing green light that
> resembles a heartbeat! It's scaring me ;-)

Hi,

the path for the ornage led has been changed from

/sys/class/leds/dockstar\:orange\:misc (old)

to

/sys/class/leds/dockstar\:orange\:health (new)

So if you disable the orange heartbeat flashing via rc.local you have to change the line for the ornage led to:

echo none       > /sys/class/leds/dockstar\:orange\:health/trigger

Greetings

StefanV3

Edited 1 time(s). Last edit at 01/18/2011 01:09PM by StefanV3.

Reply Quote

wambo

Re: new kernel package ready to use
January 18, 2011 02:47PM

Registered: 14 years ago
Posts: 13

gorgone Wrote:
-------------------------------------------------------
> http://code.google.com/p/compcache/
>
> compcache (compressed ram support files incl
> source)
>
> 1. download
> 2. extract
> 3. make install

Hi

Try to follow the instruction but I end up in the error code below......any advice ?.

Thanks
Christian

make
make -C "/lib/modules/2.6.37-dockstar/build" M=/tmp/compcache-0.6.2 modules
make: *** /lib/modules/2.6.37-dockstar/build: No such file or directory. Stop.
make: *** [all] Error 2

Reply Quote

gorgone

Re: new kernel package ready to use
January 18, 2011 03:21PM

Registered: 14 years ago
Posts: 166

not make

make install

if u want to make it u need a complete build envionment

Reply Quote

wambo

Re: new kernel package ready to use
January 18, 2011 04:37PM

Registered: 14 years ago
Posts: 13

gorgone Wrote:
-------------------------------------------------------
> not make
>
> make install
>
> if u want to make it u need a complete build
> envionment

Hi

Thanks fo the quick answer......I did try this before .......The result was...

root@debian:/tmp/compcache-0.6.2# make install
make: *** No rule to make target `install'. Stop.

Sorry...:-) ....as you can see I´m not a Linux expert....anything I have to add...:-)

Christian

Reply Quote

wambo

Re: new kernel package ready to use
January 18, 2011 04:56PM

Registered: 14 years ago
Posts: 13

wambo Wrote:
-------------------------------------------------------
> gorgone Wrote:
> --------------------------------------------------
> -----
> > not make
> >
> > make install
> >
> > if u want to make it u need a complete build
> > envionment
>
>
> Hi
>
> Thanks fo the quick answer......I did try this
> before .......The result was...
>
> root@debian:/tmp/compcache-0.6.2# make install
> make: *** No rule to make target `install'.
> Stop.
>
> Sorry...:-) ....as you can see I´m not a Linux
> expert....anything I have to add...:-)
>
> Christian

...forgot to mention...I use kernel version 2.6.37 (...your "v1" version......)

Thx
Christian

Reply Quote

sluk

Re: new kernel package ready to use
January 18, 2011 05:51PM

Registered: 13 years ago
Posts: 18

StefanV3 Wrote:

> the path for the ornage led has been changed from
>
> /sys/class/leds/dockstar\:orange\:misc (old)
>
> to
>
> /sys/class/leds/dockstar\:orange\:health (new)

Really? I found it still in /sys/class/leds/dockstar:orange:misc while booting from the vanilla kernel.

Reply Quote

gorgone

Re: new kernel package ready to use
January 18, 2011 06:53PM

Registered: 14 years ago
Posts: 166

sluk Wrote:
-------------------------------------------------------
> StefanV3 Wrote:
>
> > the path for the ornage led has been changed
> from
> >
> > /sys/class/leds/dockstar\:orange\:misc (old)
> >
> > to
> >
> > /sys/class/leds/dockstar\:orange\:health (new)
>
> Really? I found it still in
> /sys/class/leds/dockstar:orange:misc while booting
> from the vanilla kernel.

sorry its my fault i change it in the next revision to healt and misc
back to default

Reply Quote

ingmar_k

Re: new kernel package ready to use
January 19, 2011 07:06AM

Just had a look and it seems that the compcache kernel patch is already included in kernel 2.6.37 sources. Anyone already using that kernel with compcache?

Reply Quote

Mirko76

Re: new kernel package ready to use
January 19, 2011 10:39AM

I installed the 2.6.37 on my dockstar sucessfully. Now i wand to compile s2-liplianin to use my usb dvb-device.

What do i need to compile s2-liplianin?

Thanks

Reply Quote

sluk

Re: new kernel package ready to use
January 19, 2011 10:53PM

Registered: 13 years ago
Posts: 18

ingmar_k Wrote:
-------------------------------------------------------
> Just had a look and it seems that the compcache
> kernel patch is already included in kernel 2.6.37
> sources. Anyone already using that kernel with
> compcache?

How to enable? I can give it a test...

Reply Quote

ingmar_k

Re: new kernel package ready to use
January 20, 2011 07:27AM

I'd say try what's described here:

http://code.google.com/p/compcache/wiki/CompilingAndUsingNew

But as I didn't test the procedure myself yet, I'm not sure if there are problems or not and how the details will look like. If you have the time, good luck and please report back with your findings. ;-)

Reply Quote

sluk

Re: new kernel package ready to use
January 20, 2011 08:16AM

Registered: 13 years ago
Posts: 18

@ingmar_k, already tried, I don't think procedures in this link are applicable to 2.6.37. Maybe what we need is updated initramfs-tools...

Edited 1 time(s). Last edit at 01/20/2011 08:22AM by sluk.

Reply Quote

ingmar_k

Re: new kernel package ready to use
January 20, 2011 04:38PM

sluk Wrote:
-------------------------------------------------------
> @ingmar_k, already tried, I don't think procedures
> in this link are applicable to 2.6.37. Maybe what
> we need is updated initramfs-tools...

OK, so it looks like it's no longer officially called compcache, but is now ZRAM and is indeed included in kernels >=2.636, AFAIK.

The readme provided here could give some more insight:

https://compcache.googlecode.com/hg/README

Had no real time to fully read it, but it seems to differ from the version on the googlecode site. I might be wrong, though. Unfortunately I simply don't have the time ATM for a more detailed look. ;-)

Have fun!

Reply Quote

sluk

Re: new kernel package ready to use
January 20, 2011 05:57PM

Registered: 13 years ago
Posts: 18

May need CONFIG_ZRAM=m and CONFIG_ZRAM_STATS=y in kernel configuration and re-compile, I will take a look later today...

Reply Quote

gorgone

Re: new kernel package ready to use
January 20, 2011 07:17PM

Registered: 14 years ago
Posts: 166

my new kernel supports zram and my compcache package is ready to install (precompiled)

Reply Quote

sluk

Re: new kernel package ready to use
January 20, 2011 10:02PM

Registered: 13 years ago
Posts: 18

compcache package is not required for kernel 2.6.37, just need to have CONFIG_ZRAM=m in .config

Below are steps required to create the compressed RAM based block device and use it as swap space:

root@debian:~# modprobe zram
root@debian:~# ls -l /dev/zram*
brw-rw---- 1 root disk 254, 0 Jan 21 11:42 /dev/zram0
root@debian:~# cat /sys/block/zram0/disksize
0
# Create a 40MB RAM disk
root@debian:~# echo 41943040 > /sys/block/zram0/disksize
root@debian:~# mkswap /dev/zram0
Setting up swapspace version 1, size = 40956 KiB
no label, UUID=ad273409-8cc1-4679-aae3-3a9d716958b8
root@debian:~# swapon /dev/zram0
root@debian:~# swapon -s
Filename                                Type            Size    Used    Priority
/dev/sda2                               partition       506040  0       -1
/dev/zram0                              partition       40956   0       -2

Reply Quote

ingmar_k

Re: new kernel package ready to use
January 21, 2011 05:27AM

Very nice! Thank you both for the tips and for reporting back with all the needed info. As soon as I have the time I will setup a new emdebian install on my dockstar, use my new small kernel and try ZRAM. Great! Can't wait until I finally have the time. Keep up the good work guys.

Reply Quote

kern

Re: new kernel package ready to use
January 22, 2011 10:23AM

Hi, is there a howto for dockstar yavdr and sc?
ke

Reply Quote

wambo

Re: new kernel package ready to use
January 22, 2011 10:31AM

Registered: 14 years ago
Posts: 13

Hi

Is there any discription how to compile and install a kernel.....Basically I can install the patches, compile (that task take around 30 minutes)......but what will be the next task.....

Thx in advance
Christian

Reply Quote

gorgone

Re: new kernel package ready to use
January 22, 2011 10:38AM

Registered: 14 years ago
Posts: 166

wambo Wrote:
-------------------------------------------------------
> Hi
>
> Is there any discription how to compile and
> install a kernel.....Basically I can install the
> patches, compile (that task take around 30
> minutes)......but what will be the next task.....
>
> Thx in advance
> Christian

http://forum.doozan.com/read.php?2,524

Reply Quote

sluk

Re: new kernel package ready to use
January 23, 2011 08:36AM

Registered: 13 years ago
Posts: 18

gorgone Wrote:
-------------------------------------------------------

> add this line
>
> echo none >
> /sys/class/leds/dockstar\:green\:health/trigger
>
> under
>
> log_action_msg "Will now halt"
> halt -d -f $netdown $poweroff $hddown
>
> in /etc/init.d/halt
> this shows u when it is safe to remove disks and
> power cable
> on init 0 or halt command

Seems no effect, the green light still on after "halt"...

Reply Quote

Twi

Re: new kernel package ready to use
January 23, 2011 06:37PM

Registered: 14 years ago
Posts: 23

Is it inside the curly bracket?

log_action_msg "Will now halt"
halt -d -f $netdown $poweroff $hddown
echo none > /sys/class/leds/dockstar\:green\:health/trigger
}

Reply Quote

sluk

Re: new kernel package ready to use
January 23, 2011 07:20PM

Registered: 13 years ago
Posts: 18

Yes...

        log_action_msg "Will now halt"
        halt -d -f $netdown $poweroff $hddown
        echo none > /sys/class/leds/dockstar:green:health/trigger
}

Looks to me the "halt" command is not execute /etc/init.d/halt, cannot see the message "Will now halt", instead:

root@debian:/etc# halt

Broadcast message from root@debian (pts/0) (Mon Jan 24 09:24:34 2011):

The system is going down for system halt NOW!

Edited 3 time(s). Last edit at 01/23/2011 07:28PM by sluk.

Reply Quote

lintweaker

Re: new kernel package ready to use
January 24, 2011 12:50PM

Registered: 13 years ago
Posts: 1

I just installed your new 2.6.37 'heavy' kernel, easy to install and it just works great. Thanks!

Reply Quote

punter

Re: new kernel package ready to use
January 25, 2011 07:54PM

Registered: 13 years ago
Posts: 4

hi
where do the system messages get sent? ie I was expecting a /var/log/messages
is there an easy way of getting oscam installed?
danke schön

Reply Quote