Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug March 30, 2015 01:12PM |
Registered: 14 years ago Posts: 264 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug March 30, 2015 04:50PM |
Registered: 11 years ago Posts: 165 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug March 30, 2015 05:13PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug March 30, 2015 05:37PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug March 30, 2015 09:44PM |
Registered: 14 years ago Posts: 264 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug March 31, 2015 01:04AM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 01, 2015 06:37AM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 01, 2015 05:43PM |
Registered: 14 years ago Posts: 264 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 01, 2015 05:57PM |
Registered: 14 years ago Posts: 264 |
U-Boot 2014.07-tld-2 (Sep 20 2014 - 00:52:18) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 PogoE02> run usb_init (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found PogoE02> ext2load usb 0:1 0x800000 /boot/uboot-original-mtd0.kwb 524288 bytes read in 332 ms (1.5 MiB/s) PogoE02> go 0x800200 ## Starting application at 0x00800200 ... U-Boot 1.1.4 (Sep 28 2009 - 11:55:23) Cloud Engines v2.0 (3.4.16) U-Boot code: 00600000 -> 0067FFF0 BSS: -> 00690D60 Soc: 88F6281 A0 (DDR2) CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 256MB DRAM Total size 256MB 16bit width Flash: 0 kB Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB CPU : Marvell Feroceon (Rev 1) CLOUD ENGINES BOARD: PPV2 Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 NAND read: device 0 offset 0x100000, size 0x200000 Reading data from 0x2ff800 -- 100% complete. 2097152 bytes read: OK ## Booting image at 00800000 ... Image Name: Linux-2.6.22.18 Created: 2009-08-10 19:57:40 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1977716 Bytes = 1.9 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux............................................................................................................................ done, booting the kernel. [ 0.000000] Linux version 2.6.22.18 (bdietrich@brad-ux) (gcc version 4.2.1) #44 Mon Aug 10 12:57:36 PDT 2009 [ 0.000000] CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053177 [ 0.000000] Machine: Feroceon-KW [ 0.000000] Using UBoot passing parameters structure [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU0: D VIVT write-back cache [ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] Built 1 zonelists. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 ro [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.010000] Memory: 256MB 0MB 0MB 0MB = 256MB total [ 0.010000] Memory: 255872KB available (3592K code, 252K data, 120K init) [ 0.250000] Mount-cache hash table entries: 512 [ 0.250000] CPU: Testing write buffer coherency: ok [ 0.250000] NET: Registered protocol family 16 [ 0.250000] [ 0.250000] CPU Interface [ 0.250000] ------------- [ 0.250000] SDRAM_CS0 ....base 00000000, size 256MB [ 0.250000] SDRAM_CS1 ....disable [ 0.250000] SDRAM_CS2 ....disable [ 0.250000] SDRAM_CS3 ....disable [ 0.250000] PEX0_MEM ....base e8000000, size 128MB [ 0.250000] PEX0_IO ....base f2000000, size 1MB [ 0.250000] INTER_REGS ....base f1000000, size 1MB [ 0.250000] NFLASH_CS ....base fa000000, size 2MB [ 0.250000] SPI_CS ....base f4000000, size 16MB [ 0.250000] BOOT_ROM_CS ....no such [ 0.250000] DEV_BOOTCS ....no such [ 0.250000] CRYPT_ENG ....base f0000000, size 2MB [ 0.250000] [ 0.250000] Marvell Development Board (LSP Version KW_LSP_4.2.7_patch21)-- SHEEVA PLUG Soc: 88F6281 A0 LE [ 0.250000] [ 0.250000] Detected Tclk 200000000 and SysClk 400000000 [ 0.250000] MV Buttons Device Load [ 0.250000] Marvell USB EHCI Host controller #0: c0650600 [ 0.750000] PEX0 interface detected no Link. [ 0.750000] PCI: bus0: Fast back to back transfers enabled [ 0.750000] SCSI subsystem initialized [ 0.750000] usbcore: registered new interface driver usbfs [ 0.750000] usbcore: registered new interface driver hub [ 0.750000] usbcore: registered new device driver usb [ 0.750000] NET: Registered protocol family 2 [ 0.760000] Time: kw_clocksource clocksource has been installed. [ 0.850000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.850000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.850000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.850000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.850000] TCP reno registered [ 0.880000] RTC has been updated!!! [ 0.880000] RTC registered [ 0.880000] Use the XOR engines (acceleration) for enhancing the following functions: [ 0.880000] o RAID 5 Xor calculation [ 0.880000] o kernel memcpy [ 0.880000] o kenrel memzero [ 0.880000] Number of XOR engines to use: 4 [ 0.880000] cesadev_init(c00116b4) [ 0.880000] mvCesaInit: sessions=640, queue=64, pSram=f0000000 [ 0.880000] MV Buttons Driver Load [ 0.880000] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 0.880000] squashfs: LZMA suppport for slax.org by jro [ 0.880000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.880000] io scheduler noop registered [ 0.880000] io scheduler anticipatory registered (default) [ 0.900000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 0.900000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 0.910000] serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A [ 0.920000] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize [ 0.930000] Loading Marvell Ethernet Driver: [ 0.940000] o Cached descriptors in DRAM [ 0.940000] o DRAM SW cache-coherency [ 0.940000] o Single RX Queue support - ETH_DEF_RXQ=0 [ 0.950000] o Single TX Queue support - ETH_DEF_TXQ=0 [ 0.950000] o TCP segmentation offload enabled [ 0.960000] o Receive checksum offload enabled [ 0.960000] o Transmit checksum offload enabled [ 0.970000] o Network Fast Processing (Routing) supported [ 0.970000] o Driver ERROR statistics enabled [ 0.980000] o Driver INFO statistics enabled [ 0.980000] o Proc tool API enabled [ 0.990000] o Rx descripors: q0=128 [ 0.990000] o Tx descripors: q0=532 [ 0.990000] o Loading network interface(s): [ 1.000000] o eth0, ifindex = 1, GbE port = 0 [ 1.010000] o eth1, ifindex = 2, GbE port = 1 [ 1.010000] [ 1.010000] mvFpRuleDb (cf8c2000): 2048 entries, 8192 bytes [ 1.020000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 1.030000] Copyright (c) 1999-2006 Intel Corporation. [ 1.030000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 1.040000] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.040000] [ 1.040000] Warning Sata is Powered Off [ 1.050000] NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ [ 1.060000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) [ 1.070000] Scanning device for bad blocks [ 1.090000] Bad eraseblock 472 at 0x03b00000 [ 1.120000] Using static partition definition [ 1.130000] Creating 4 MTD partitions on "nand_mtd": [ 1.130000] 0x00000000-0x00100000 : "u-boot" [ 1.140000] 0x00100000-0x00500000 : "uImage" [ 1.140000] 0x00500000-0x02500000 : "root" [ 1.150000] 0x02500000-0x08000000 : "data" [ 1.150000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI [ 1.160000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 [ 1.200000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 [ 1.220000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.220000] usb usb1: configuration #1 chosen from 1 choice [ 1.230000] hub 1-0:1.0: USB hub found [ 1.230000] hub 1-0:1.0: 1 port detected [ 1.350000] USB Universal Host Controller Interface driver v3.0 [ 1.630000] usb 1-1: new high speed USB device using ehci_marvell and address 2 [ 1.780000] usb 1-1: configuration #1 chosen from 1 choice [ 1.780000] hub 1-1:1.0: USB hub found [ 1.790000] hub 1-1:1.0: 4 ports detected [ 2.140000] usb 1-1.1: new high speed USB device using ehci_marvell and address 3 [ 2.240000] usb 1-1.1: configuration #1 chosen from 1 choice [ 2.240000] usbcore: registered new interface driver usblp [ 2.250000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 2.260000] Initializing USB Mass Storage driver... [ 2.260000] scsi0 : SCSI emulation for USB Mass Storage devices [ 2.270000] usbcore: registered new interface driver usb-storage [ 2.270000] USB Mass Storage support registered. [ 2.280000] mice: PS/2 mouse device common for all mice [ 2.280000] i2c /dev entries driver [ 2.290000] Linux telephony interface: v1.00 [ 2.290000] md: linear personality registered for level -1 [ 2.300000] md: raid0 personality registered for level 0 [ 2.300000] md: raid1 personality registered for level 1 [ 2.480000] raid6: int32x1 97 MB/s [ 2.650000] raid6: int32x2 114 MB/s [ 2.820000] raid6: int32x4 122 MB/s [ 2.990000] raid6: int32x8 110 MB/s [ 2.990000] raid6: using algorithm int32x4 (122 MB/s) [ 2.990000] md: raid6 personality registered for level 6 [ 3.000000] md: raid5 personality registered for level 5 [ 3.000000] md: raid4 personality registered for level 4 [ 3.010000] raid5: measuring checksumming speed [ 3.060000] arm4regs : 1084.000 MB/sec [ 3.110000] 8regs : 754.800 MB/sec [ 3.160000] 32regs : 890.400 MB/sec [ 3.160000] raid5: using function: arm4regs (1084.000 MB/sec) [ 3.170000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 3.170000] dm_crypt using the OCF package. [ 3.180000] sdhci: Secure Digital Host Controller Interface driver [ 3.180000] sdhci: Copyright(c) Pierre Ossman [ 3.190000] usbcore: registered new interface driver usbhid [ 3.190000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 3.200000] TCP cubic registered [ 3.200000] NET: Registered protocol family 1 [ 3.210000] NET: Registered protocol family 17 [ 3.210000] md: Autodetecting RAID arrays. [ 3.220000] md: autorun ... [ 3.220000] md: ... autorun DONE. [ 6.440000] Empty flash at 0x009ac208 ends at 0x009ac800 [ 7.060000] VFS: Mounted root (jffs2 filesystem) readonly. [ 7.070000] Freeing init memory: 120K [ 7.800000] scsi 0:0:0:0: Direct-Access hp v165p 1638 PQ: 0 ANSI: 4 [ 7.830000] sd 0:0:0:0: [sda] 31950720 512-byte hardware sectors (16359 MB) [ 7.860000] sd 0:0:0:0: [sda] Write Protect is off [ 7.860000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.910000] sd 0:0:0:0: [sda] 31950720 512-byte hardware sectors (16359 MB) [ 7.920000] sd 0:0:0:0: [sda] Write Protect is off [ 7.920000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.930000] sda: sda1 sda2 sda3 [ 7.940000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 8.010000] sd 0:0:0:0: Attached scsi generic sg0 type 0 init started: BusyBox v1.7.0 (2008-02-26 19:25:17 IST) starting pid 287, tty '': '/etc/init.d/rcS' [ 9.260000] eth0: link down [ 9.260000] eth0: started udhcpc (v1.7.0) started HWADDR 00 0x25 0x31 0x00 0xc0 0x30 PIP0 192 PIP1 48 Sending discover... [ 10.950000] eth0: link up, full duplex, speed 100 Mbps Sending discover... Sending discover... HWADDR 00 0x25 0x31 0x00 0xc0 0x30 PIP0 192 PIP1 48 Unexpected Argument: leasefail interface=eth0 PATH=/sbin:/usr/sbin:/bin:/usr/bin PWD=/ SHLVL=1 HOME=/ _=/bin/printenv No lease, forking to background starting pid 332, tty '': '/bin/sh' -sh-3.2#
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 01, 2015 06:44PM |
Admin Registered: 13 years ago Posts: 19,102 |
Quote
Linux version 2.6.22.18 (bdietrich@buildman) (gcc version 4.2.1) #81 Tue Oct 19 16:05:00 PDT 2010
[ 8.170000] VFS: Mounted root (jffs2 filesystem) readonly. [ 8.170000] Freeing init memory: 124K [ 8.600000] JFFS2 compression type 0x07 not available. [ 8.600000] Error: jffs2_decompress returned -5
Re: fsload for E02 in 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 01, 2015 07:49PM |
Registered: 9 years ago Posts: 63 |
Feel free to take a cascade like mine in http://archlinuxarm.org/forum/viewtopic.php?f=30&t=8383#p46069 to automagically fall back to each of the various possible USB and NAND OSs from your default environment (incl. enhancements you'll probably add to autoboot even FDT method 4a without manual intervention as well).Quote
bodhi
I've just peeked at the code (difference between Dockstar and Pogo E02). Yes, there was a missing configuration for jffs2 in Pogo E02 u-boot! I will add this in the next release.
I just reached another E02 some 400km from the first and carried over my config (mceusb, lcdproc, iptables) of your great 3.16 within mere minutes, but unfortunately this was possible only because it already had a replacement mtd0 too:Quote
bodhi
TEN/restamp et al, If you happen to have an unmodded Pogo E02, and with serial console connected
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 01, 2015 10:08PM |
Registered: 14 years ago Posts: 264 |
[ 8.170000] VFS: Mounted root (jffs2 filesystem) readonly. [ 8.170000] Freeing init memory: 124K [ 8.600000] JFFS2 compression type 0x07 not available. [ 8.600000] Error: jffs2_decompress returned -5Seems this problem has been around for quite a while:
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 02, 2015 12:20AM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 02, 2015 01:40AM |
Registered: 14 years ago Posts: 264 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 02, 2015 02:38AM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 02, 2015 04:12PM |
Registered: 14 years ago Posts: 264 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 02, 2015 04:57PM |
Admin Registered: 13 years ago Posts: 19,102 |
root@tldDebian:/usr/src/u-boot-2014.07-tld/include/configs# grep -i jffs2 pogo_e02.h #define CONFIG_CMD_JFFS2 #define CONFIG_JFFS2_NAND #define CONFIG_JFFS2_LZO
U-Boot 2014.07-tld-3 (Mar 31 2015 - 16:56:13) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 PogoE02> run pogo_bootcmd ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000 Scanning JFFS2 FS: ........... done. ### JFFS2 load complete: 524288 bytes loaded to 0x800000 ## Starting application at 0x00800200 ... U-Boot 1.1.4 (Sep 28 2009 - 11:55:23) Cloud Engines v2.0 (3.4.16) U-Boot code: 00600000 -> 0067FFF0 BSS: -> 00690D60 Soc: 88F6281 A0 (DDR2) CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 256MB DRAM Total size 256MB 16bit width Flash: 0 kB Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB CPU : Marvell Feroceon (Rev 1) CLOUD ENGINES BOARD: PPV2 Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 NAND read: device 0 offset 0x100000, size 0x200000 Reading data from 0x2ff800 -- 100% complete. 2097152 bytes read: OK ## Booting image at 00800000 ... Image Name: Linux-2.6.22.18 Created: 2010-10-19 23:05:02 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1979140 Bytes = 1.9 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux............................................................................................................................ done, booting the kernel. [ 0.000000] Linux version 2.6.22.18 (bdietrich@buildman) (gcc version 4.2.1) #81 Tue Oct 19 16:05:00 PDT 2010 [ 0.000000] CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053177 [ 0.000000] Machine: Feroceon-KW [ 0.000000] Using UBoot passing parameters structure [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU0: D VIVT write-back cache [ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] Built 1 zonelists. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 ro [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.010000] Memory: 256MB 0MB 0MB 0MB = 256MB total [ 0.010000] Memory: 255872KB available (3592K code, 253K data, 124K init) [ 0.250000] Mount-cache hash table entries: 512 [ 0.250000] CPU: Testing write buffer coherency: ok [ 0.250000] NET: Registered protocol family 16 [ 0.250000] [ 0.250000] CPU Interface [ 0.250000] ------------- [ 0.250000] SDRAM_CS0 ....base 00000000, size 256MB [ 0.250000] SDRAM_CS1 ....disable [ 0.250000] SDRAM_CS2 ....disable [ 0.250000] SDRAM_CS3 ....disable [ 0.250000] PEX0_MEM ....base e8000000, size 128MB [ 0.250000] PEX0_IO ....base f2000000, size 1MB [ 0.250000] INTER_REGS ....base f1000000, size 1MB [ 0.250000] NFLASH_CS ....base fa000000, size 2MB [ 0.250000] SPI_CS ....base f4000000, size 16MB [ 0.250000] BOOT_ROM_CS ....no such [ 0.250000] DEV_BOOTCS ....no such [ 0.250000] CRYPT_ENG ....base f0000000, size 2MB [ 0.250000] [ 0.250000] Marvell Development Board (LSP Version KW_LSP_4.2.7_patch21_with_rx_desc_tuned)-- SHEEVA PLUG Soc: 88F6281 A0 LE [ 0.250000] [ 0.250000] Detected Tclk 200000000 and SysClk 400000000 [ 0.250000] MV Buttons Device Load [ 0.250000] Marvell USB EHCI Host controller #0: c0652600 [ 0.750000] PEX0 interface detected no Link. [ 0.750000] PCI: bus0: Fast back to back transfers enabled [ 0.750000] SCSI subsystem initialized [ 0.750000] usbcore: registered new interface driver usbfs [ 0.750000] usbcore: registered new interface driver hub [ 0.750000] usbcore: registered new device driver usb [ 0.750000] NET: Registered protocol family 2 [ 0.760000] Time: kw_clocksource clocksource has been installed. [ 0.850000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.850000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.850000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.850000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.850000] TCP reno registered [ 0.880000] RTC has been updated!!! [ 0.880000] RTC registered [ 0.880000] Use the XOR engines (acceleration) for enhancing the following functions: [ 0.880000] o RAID 5 Xor calculation [ 0.880000] o kernel memcpy [ 0.880000] o kenrel memzero [ 0.880000] Number of XOR engines to use: 4 [ 0.880000] cesadev_init(c00117b0) [ 0.880000] mvCesaInit: sessions=640, queue=64, pSram=f0000000 [ 0.880000] MV Buttons Driver Load [ 0.880000] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 0.880000] squashfs: LZMA suppport for slax.org by jro [ 0.880000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.880000] io scheduler noop registered [ 0.880000] io scheduler anticipatory registered (default) [ 0.900000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 0.900000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 0.910000] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize [ 0.920000] Loading Marvell Ethernet Driver: [ 0.920000] o Cached descriptors in DRAM [ 0.920000] o DRAM SW cache-coherency [ 0.930000] o Single RX Queue support - ETH_DEF_RXQ=0 [ 0.930000] o Single TX Queue support - ETH_DEF_TXQ=0 [ 0.940000] o TCP segmentation offload enabled [ 0.940000] o Receive checksum offload enabled [ 0.950000] o Transmit checksum offload enabled [ 0.950000] o Network Fast Processing (Routing) supported [ 0.960000] o Driver ERROR statistics enabled [ 0.960000] o Driver INFO statistics enabled [ 0.970000] o Proc tool API enabled [ 0.970000] o Rx descripors: q0=128 [ 0.970000] o Tx descripors: q0=532 [ 0.980000] o Loading network interface(s): [ 0.990000] o eth0, ifindex = 1, GbE port = 0 [ 0.990000] o eth1, ifindex = 2, GbE port = 1 [ 1.000000] [ 1.000000] mvFpRuleDb (cfdf6000): 2048 entries, 8192 bytes [ 1.000000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 1.010000] Copyright (c) 1999-2006 Intel Corporation. [ 1.020000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 1.020000] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.030000] [ 1.030000] Warning Sata is Powered Off [ 1.030000] NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ [ 1.040000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) [ 1.050000] Scanning device for bad blocks [ 1.100000] Using static partition definition [ 1.110000] Creating 4 MTD partitions on "nand_mtd": [ 1.110000] 0x00000000-0x00100000 : "u-boot" [ 1.120000] 0x00100000-0x00500000 : "uImage" [ 1.120000] 0x00500000-0x02500000 : "root" [ 1.130000] 0x02500000-0x08000000 : "data" [ 1.130000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI [ 1.140000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 [ 1.180000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 [ 1.200000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.200000] usb usb1: configuration #1 chosen from 1 choice [ 1.210000] hub 1-0:1.0: USB hub found [ 1.210000] hub 1-0:1.0: 1 port detected [ 1.330000] USB Universal Host Controller Interface driver v3.0 [ 1.610000] usb 1-1: new high speed USB device using ehci_marvell and address 2 [ 1.760000] usb 1-1: configuration #1 chosen from 1 choice [ 1.760000] hub 1-1:1.0: USB hub found [ 1.770000] hub 1-1:1.0: 4 ports detected [ 1.880000] usbcore: registered new interface driver usblp [ 1.880000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 1.890000] Initializing USB Mass Storage driver... [ 1.890000] usbcore: registered new interface driver usb-storage [ 1.900000] USB Mass Storage support registered. [ 1.910000] mice: PS/2 mouse device common for all mice [ 1.910000] i2c /dev entries driver [ 1.910000] Linux telephony interface: v1.00 [ 1.920000] md: linear personality registered for level -1 [ 1.920000] md: raid0 personality registered for level 0 [ 1.930000] md: raid1 personality registered for level 1 [ 2.100000] raid6: int32x1 97 MB/s [ 2.270000] raid6: int32x2 114 MB/s [ 2.440000] raid6: int32x4 122 MB/s [ 2.610000] raid6: int32x8 110 MB/s [ 2.610000] raid6: using algorithm int32x4 (122 MB/s) [ 2.610000] md: raid6 personality registered for level 6 [ 2.620000] md: raid5 personality registered for level 5 [ 2.620000] md: raid4 personality registered for level 4 [ 2.630000] raid5: measuring checksumming speed [ 2.680000] arm4regs : 1084.000 MB/sec [ 2.730000] 8regs : 754.800 MB/sec [ 2.780000] 32regs : 899.600 MB/sec [ 2.780000] raid5: using function: arm4regs (1084.000 MB/sec) [ 2.790000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 2.790000] dm_crypt using the OCF package. [ 2.800000] sdhci: Secure Digital Host Controller Interface driver [ 2.800000] sdhci: Copyright(c) Pierre Ossman [ 2.810000] usbcore: registered new interface driver usbhid [ 2.810000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 2.820000] TCP cubic registered [ 2.820000] NET: Registered protocol family 1 [ 2.830000] NET: Registered protocol family 17 [ 2.830000] md: Autodetecting RAID arrays. [ 2.840000] md: autorun ... [ 2.840000] md: ... autorun DONE. [ 8.170000] VFS: Mounted root (jffs2 filesystem) readonly. [ 8.170000] Freeing init memory: 124K [ 8.600000] JFFS2 compression type 0x07 not available. [ 8.600000] Error: jffs2_decompress returned -5 [ 8.610000] JFFS2 compression type 0x07 not available. [ 8.610000] Error: jffs2_decompress returned -5 ………. [ 94.940000] JFFS2 compression type 0x07 not available. [ 94.950000] Error: jffs2_decompress returned -5
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 02, 2015 10:03PM |
Registered: 14 years ago Posts: 264 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 03, 2015 12:31AM |
Admin Registered: 13 years ago Posts: 19,102 |
nanddump -n --noecc Read without error correction
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 03, 2015 01:08AM |
Admin Registered: 13 years ago Posts: 19,102 |
uboot.2014.07-tld-3.pogo_e02.mtd0.kwb md5: c2451ef0f774e99a46d1333eefc31047
U-Boot 2014.07-tld-3 (Mar 31 2015 - 16:56:13) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 PogoE02> run pogo_bootcmd ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000 Scanning JFFS2 FS: ........... done. ### JFFS2 load complete: 524288 bytes loaded to 0x800000 ## Starting application at 0x00800200 ... U-Boot 1.1.4 (Sep 28 2009 - 11:55:23) Cloud Engines v2.0 (3.4.16) U-Boot code: 00600000 -> 0067FFF0 BSS: -> 00690D60 Soc: 88F6281 A0 (DDR2) CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 256MB DRAM Total size 256MB 16bit width Flash: 0 kB Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB CPU : Marvell Feroceon (Rev 1) CLOUD ENGINES BOARD: PPV2 Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 NAND read: device 0 offset 0x100000, size 0x200000 Reading data from 0x2ff800 -- 100% complete. 2097152 bytes read: OK ## Booting image at 00800000 ... Image Name: Linux-2.6.22.18 Created: 2009-08-10 19:57:40 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1977716 Bytes = 1.9 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux............................................................................................................................ done, booting the kernel. [ 0.000000] Linux version 2.6.22.18 (bdietrich@brad-ux) (gcc version 4.2.1) #44 Mon Aug 10 12:57:36 PDT 2009 [ 0.000000] CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053177 [ 0.000000] Machine: Feroceon-KW [ 0.000000] Using UBoot passing parameters structure [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU0: D VIVT write-back cache [ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] Built 1 zonelists. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 ro [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.010000] Memory: 256MB 0MB 0MB 0MB = 256MB total [ 0.010000] Memory: 255872KB available (3592K code, 252K data, 120K init) [ 0.250000] Mount-cache hash table entries: 512 [ 0.250000] CPU: Testing write buffer coherency: ok [ 0.250000] NET: Registered protocol family 16 [ 0.250000] [ 0.250000] CPU Interface [ 0.250000] ------------- [ 0.250000] SDRAM_CS0 ....base 00000000, size 256MB [ 0.250000] SDRAM_CS1 ....disable [ 0.250000] SDRAM_CS2 ....disable [ 0.250000] SDRAM_CS3 ....disable [ 0.250000] PEX0_MEM ....base e8000000, size 128MB [ 0.250000] PEX0_IO ....base f2000000, size 1MB [ 0.250000] INTER_REGS ....base f1000000, size 1MB [ 0.250000] NFLASH_CS ....base fa000000, size 2MB [ 0.250000] SPI_CS ....base f4000000, size 16MB [ 0.250000] BOOT_ROM_CS ....no such [ 0.250000] DEV_BOOTCS ....no such [ 0.250000] CRYPT_ENG ....base f0000000, size 2MB [ 0.250000] [ 0.250000] Marvell Development Board (LSP Version KW_LSP_4.2.7_patch21)-- SHEEVA PLUG Soc: 88F6281 A0 LE [ 0.250000] [ 0.250000] Detected Tclk 200000000 and SysClk 400000000 [ 0.250000] MV Buttons Device Load [ 0.250000] Marvell USB EHCI Host controller #0: c0650600 [ 0.750000] PEX0 interface detected no Link. [ 0.750000] PCI: bus0: Fast back to back transfers enabled [ 0.750000] SCSI subsystem initialized [ 0.750000] usbcore: registered new interface driver usbfs [ 0.750000] usbcore: registered new interface driver hub [ 0.750000] usbcore: registered new device driver usb [ 0.750000] NET: Registered protocol family 2 [ 0.760000] Time: kw_clocksource clocksource has been installed. [ 0.850000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.850000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.850000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.850000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.850000] TCP reno registered [ 0.880000] RTC has been updated!!! [ 0.880000] RTC registered [ 0.880000] Use the XOR engines (acceleration) for enhancing the following functions: [ 0.880000] o RAID 5 Xor calculation [ 0.880000] o kernel memcpy [ 0.880000] o kenrel memzero [ 0.880000] Number of XOR engines to use: 4 [ 0.880000] cesadev_init(c00116b4) [ 0.880000] mvCesaInit: sessions=640, queue=64, pSram=f0000000 [ 0.880000] MV Buttons Driver Load [ 0.880000] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 0.880000] squashfs: LZMA suppport for slax.org by jro [ 0.880000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.880000] io scheduler noop registered [ 0.880000] io scheduler anticipatory registered (default) [ 0.900000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 0.900000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 0.910000] serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A [ 0.920000] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize [ 0.930000] Loading Marvell Ethernet Driver: [ 0.940000] o Cached descriptors in DRAM [ 0.940000] o DRAM SW cache-coherency [ 0.940000] o Single RX Queue support - ETH_DEF_RXQ=0 [ 0.950000] o Single TX Queue support - ETH_DEF_TXQ=0 [ 0.950000] o TCP segmentation offload enabled [ 0.960000] o Receive checksum offload enabled [ 0.960000] o Transmit checksum offload enabled [ 0.970000] o Network Fast Processing (Routing) supported [ 0.970000] o Driver ERROR statistics enabled [ 0.980000] o Driver INFO statistics enabled [ 0.980000] o Proc tool API enabled [ 0.990000] o Rx descripors: q0=128 [ 0.990000] o Tx descripors: q0=532 [ 0.990000] o Loading network interface(s): [ 1.000000] o eth0, ifindex = 1, GbE port = 0 [ 1.010000] o eth1, ifindex = 2, GbE port = 1 [ 1.010000] [ 1.010000] mvFpRuleDb (cf8c2000): 2048 entries, 8192 bytes [ 1.020000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 1.030000] Copyright (c) 1999-2006 Intel Corporation. [ 1.030000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 1.040000] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.040000] [ 1.040000] Warning Sata is Powered Off [ 1.050000] NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ [ 1.060000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) [ 1.070000] Scanning device for bad blocks [ 1.120000] Using static partition definition [ 1.120000] Creating 4 MTD partitions on "nand_mtd": [ 1.130000] 0x00000000-0x00100000 : "u-boot" [ 1.130000] 0x00100000-0x00500000 : "uImage" [ 1.140000] 0x00500000-0x02500000 : "root" [ 1.140000] 0x02500000-0x08000000 : "data" [ 1.150000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI [ 1.150000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 [ 1.190000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 [ 1.210000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.210000] usb usb1: configuration #1 chosen from 1 choice [ 1.220000] hub 1-0:1.0: USB hub found [ 1.220000] hub 1-0:1.0: 1 port detected [ 1.340000] USB Universal Host Controller Interface driver v3.0 [ 1.620000] usb 1-1: new high speed USB device using ehci_marvell and address 2 [ 1.770000] usb 1-1: configuration #1 chosen from 1 choice [ 1.770000] hub 1-1:1.0: USB hub found [ 1.780000] hub 1-1:1.0: 4 ports detected [ 1.890000] usbcore: registered new interface driver usblp [ 1.890000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 1.900000] Initializing USB Mass Storage driver... [ 1.900000] usbcore: registered new interface driver usb-storage [ 1.910000] USB Mass Storage support registered. [ 1.920000] mice: PS/2 mouse device common for all mice [ 1.920000] i2c /dev entries driver [ 1.920000] Linux telephony interface: v1.00 [ 1.930000] md: linear personality registered for level -1 [ 1.930000] md: raid0 personality registered for level 0 [ 1.940000] md: raid1 personality registered for level 1 [ 2.110000] raid6: int32x1 97 MB/s [ 2.280000] raid6: int32x2 114 MB/s [ 2.450000] raid6: int32x4 122 MB/s [ 2.620000] raid6: int32x8 110 MB/s [ 2.620000] raid6: using algorithm int32x4 (122 MB/s) [ 2.620000] md: raid6 personality registered for level 6 [ 2.630000] md: raid5 personality registered for level 5 [ 2.630000] md: raid4 personality registered for level 4 [ 2.640000] raid5: measuring checksumming speed [ 2.690000] arm4regs : 1084.000 MB/sec [ 2.740000] 8regs : 754.800 MB/sec [ 2.790000] 32regs : 900.000 MB/sec [ 2.790000] raid5: using function: arm4regs (1084.000 MB/sec) [ 2.800000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 2.800000] dm_crypt using the OCF package. [ 2.810000] sdhci: Secure Digital Host Controller Interface driver [ 2.810000] sdhci: Copyright(c) Pierre Ossman [ 2.820000] usbcore: registered new interface driver usbhid [ 2.820000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 2.830000] TCP cubic registered [ 2.830000] NET: Registered protocol family 1 [ 2.840000] NET: Registered protocol family 17 [ 2.840000] md: Autodetecting RAID arrays. [ 2.850000] md: autorun ... [ 2.850000] md: ... autorun DONE. [ 8.180000] VFS: Mounted root (jffs2 filesystem) readonly. [ 8.180000] Freeing init memory: 120K [ 8.610000] JFFS2 compression type 0x07 not available. [ 8.610000] Error: jffs2_decompress returned -5 [ 8.620000] JFFS2 compression type 0x07 not available. [ 8.630000] Error: jffs2_decompress returned -5 [ 8.630000] JFFS2 compression type 0x07 not available.
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 03, 2015 01:55PM |
Registered: 14 years ago Posts: 264 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 03, 2015 04:06PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 03, 2015 04:33PM |
Registered: 14 years ago Posts: 264 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 03, 2015 05:08PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug April 03, 2015 07:25PM |
Admin Registered: 13 years ago Posts: 19,102 |
U-Boot 2014.07-tld-3 (Mar 31 2015 - 16:56:13) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 PogoE02> run pogo_bootcmd ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000 Scanning JFFS2 FS: ........ done. ### JFFS2 load complete: 524288 bytes loaded to 0x800000 ## Starting application at 0x00800200 ... U-Boot 1.1.4 (Sep 28 2009 - 11:55:23) Cloud Engines v2.0 (3.4.16) U-Boot code: 00600000 -> 0067FFF0 BSS: -> 00690D60 Soc: 88F6281 A0 (DDR2) CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 256MB DRAM Total size 256MB 16bit width Flash: 0 kB Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB CPU : Marvell Feroceon (Rev 1) CLOUD ENGINES BOARD: PPV2 Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 NAND read: device 0 offset 0x100000, size 0x200000 Reading data from 0x2ff800 -- 100% complete. 2097152 bytes read: OK ## Booting image at 00800000 ... Image Name: Linux-2.6.22.18 Created: 2010-10-19 23:05:02 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1979140 Bytes = 1.9 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux............................................................................................................................ done, booting the kernel. [ 0.000000] Linux version 2.6.22.18 (bdietrich@buildman) (gcc version 4.2.1) #81 Tue Oct 19 16:05:00 PDT 2010 [ 0.000000] CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053177 [ 0.000000] Machine: Feroceon-KW [ 0.000000] Using UBoot passing parameters structure [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU0: D VIVT write-back cache [ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] Built 1 zonelists. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 ro [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.010000] Memory: 256MB 0MB 0MB 0MB = 256MB total [ 0.010000] Memory: 255872KB available (3592K code, 253K data, 124K init) [ 0.250000] Mount-cache hash table entries: 512 [ 0.250000] CPU: Testing write buffer coherency: ok [ 0.250000] NET: Registered protocol family 16 [ 0.250000] [ 0.250000] CPU Interface [ 0.250000] ------------- [ 0.250000] SDRAM_CS0 ....base 00000000, size 256MB [ 0.250000] SDRAM_CS1 ....disable [ 0.250000] SDRAM_CS2 ....disable [ 0.250000] SDRAM_CS3 ....disable [ 0.250000] PEX0_MEM ....base e8000000, size 128MB [ 0.250000] PEX0_IO ....base f2000000, size 1MB [ 0.250000] INTER_REGS ....base f1000000, size 1MB [ 0.250000] NFLASH_CS ....base fa000000, size 2MB [ 0.250000] SPI_CS ....base f4000000, size 16MB [ 0.250000] BOOT_ROM_CS ....no such [ 0.250000] DEV_BOOTCS ....no such [ 0.250000] CRYPT_ENG ....base f0000000, size 2MB [ 0.250000] [ 0.250000] Marvell Development Board (LSP Version KW_LSP_4.2.7_patch21_with_rx_desc_tuned)-- SHEEVA PLUG Soc: 88F6281 A0 LE [ 0.250000] [ 0.250000] Detected Tclk 200000000 and SysClk 400000000 [ 0.250000] MV Buttons Device Load [ 0.250000] Marvell USB EHCI Host controller #0: c0652600 [ 0.750000] PEX0 interface detected no Link. [ 0.750000] PCI: bus0: Fast back to back transfers enabled [ 0.750000] SCSI subsystem initialized [ 0.750000] usbcore: registered new interface driver usbfs [ 0.750000] usbcore: registered new interface driver hub [ 0.750000] usbcore: registered new device driver usb [ 0.750000] NET: Registered protocol family 2 [ 0.760000] Time: kw_clocksource clocksource has been installed. [ 0.850000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.850000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.850000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.850000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.850000] TCP reno registered [ 0.880000] RTC has been updated!!! [ 0.880000] RTC registered [ 0.880000] Use the XOR engines (acceleration) for enhancing the following functions: [ 0.880000] o RAID 5 Xor calculation [ 0.880000] o kernel memcpy [ 0.880000] o kenrel memzero [ 0.880000] Number of XOR engines to use: 4 [ 0.880000] cesadev_init(c00117b0) [ 0.880000] mvCesaInit: sessions=640, queue=64, pSram=f0000000 [ 0.880000] MV Buttons Driver Load [ 0.880000] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 0.880000] squashfs: LZMA suppport for slax.org by jro [ 0.880000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.880000] io scheduler noop registered [ 0.880000] io scheduler anticipatory registered (default) [ 0.900000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 0.900000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 0.910000] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize [ 0.920000] Loading Marvell Ethernet Driver: [ 0.920000] o Cached descriptors in DRAM [ 0.920000] o DRAM SW cache-coherency [ 0.930000] o Single RX Queue support - ETH_DEF_RXQ=0 [ 0.930000] o Single TX Queue support - ETH_DEF_TXQ=0 [ 0.940000] o TCP segmentation offload enabled [ 0.940000] o Receive checksum offload enabled [ 0.950000] o Transmit checksum offload enabled [ 0.950000] o Network Fast Processing (Routing) supported [ 0.960000] o Driver ERROR statistics enabled [ 0.960000] o Driver INFO statistics enabled [ 0.970000] o Proc tool API enabled [ 0.970000] o Rx descripors: q0=128 [ 0.970000] o Tx descripors: q0=532 [ 0.980000] o Loading network interface(s): [ 0.990000] o eth0, ifindex = 1, GbE port = 0 [ 0.990000] o eth1, ifindex = 2, GbE port = 1 [ 1.000000] [ 1.000000] mvFpRuleDb (cfdf6000): 2048 entries, 8192 bytes [ 1.000000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 1.010000] Copyright (c) 1999-2006 Intel Corporation. [ 1.020000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 1.020000] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.030000] [ 1.030000] Warning Sata is Powered Off [ 1.030000] NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ [ 1.040000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) [ 1.050000] Scanning device for bad blocks [ 1.100000] Using static partition definition [ 1.110000] Creating 4 MTD partitions on "nand_mtd": [ 1.110000] 0x00000000-0x00100000 : "u-boot" [ 1.120000] 0x00100000-0x00500000 : "uImage" [ 1.120000] 0x00500000-0x02500000 : "root" [ 1.130000] 0x02500000-0x08000000 : "data" [ 1.130000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI [ 1.140000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 [ 1.180000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 [ 1.200000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.200000] usb usb1: configuration #1 chosen from 1 choice [ 1.210000] hub 1-0:1.0: USB hub found [ 1.210000] hub 1-0:1.0: 1 port detected [ 1.330000] USB Universal Host Controller Interface driver v3.0 [ 1.610000] usb 1-1: new high speed USB device using ehci_marvell and address 2 [ 1.760000] usb 1-1: configuration #1 chosen from 1 choice [ 1.760000] hub 1-1:1.0: USB hub found [ 1.770000] hub 1-1:1.0: 4 ports detected [ 1.880000] usbcore: registered new interface driver usblp [ 1.880000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 1.890000] Initializing USB Mass Storage driver... [ 1.890000] usbcore: registered new interface driver usb-storage [ 1.900000] USB Mass Storage support registered. [ 1.910000] mice: PS/2 mouse device common for all mice [ 1.910000] i2c /dev entries driver [ 1.910000] Linux telephony interface: v1.00 [ 1.920000] md: linear personality registered for level -1 [ 1.920000] md: raid0 personality registered for level 0 [ 1.930000] md: raid1 personality registered for level 1 [ 2.100000] raid6: int32x1 97 MB/s [ 2.270000] raid6: int32x2 114 MB/s [ 2.440000] raid6: int32x4 122 MB/s [ 2.610000] raid6: int32x8 110 MB/s [ 2.610000] raid6: using algorithm int32x4 (122 MB/s) [ 2.610000] md: raid6 personality registered for level 6 [ 2.620000] md: raid5 personality registered for level 5 [ 2.620000] md: raid4 personality registered for level 4 [ 2.630000] raid5: measuring checksumming speed [ 2.680000] arm4regs : 1084.000 MB/sec [ 2.730000] 8regs : 754.800 MB/sec [ 2.780000] 32regs : 899.600 MB/sec [ 2.780000] raid5: using function: arm4regs (1084.000 MB/sec) [ 2.790000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 2.790000] dm_crypt using the OCF package. [ 2.800000] sdhci: Secure Digital Host Controller Interface driver [ 2.800000] sdhci: Copyright(c) Pierre Ossman [ 2.810000] usbcore: registered new interface driver usbhid [ 2.810000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 2.820000] TCP cubic registered [ 2.820000] NET: Registered protocol family 1 [ 2.830000] NET: Registered protocol family 17 [ 2.830000] md: Autodetecting RAID arrays. [ 2.840000] md: autorun ... [ 2.840000] md: ... autorun DONE. [ 6.060000] Empty flash at 0x009ac208 ends at 0x009ac800 [ 6.690000] VFS: Mounted root (jffs2 filesystem) readonly. [ 6.690000] Freeing init memory: 124K init started: BusyBox v1.7.0 (2008-02-26 19:25:17 IST) starting pid 267, tty '': '/etc/init.d/rcS' [ 8.810000] eth0: link down [ 8.820000] eth0: started udhcpc (v1.7.0) started
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug, NSA325, NSA320 April 03, 2015 08:54PM |
Registered: 14 years ago Posts: 264 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug, NSA325, NSA320 April 03, 2015 08:59PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug, NSA325, NSA320 April 03, 2015 09:20PM |
Registered: 14 years ago Posts: 264 |
PogoE02> fsinfo ### filesystem type is JFFS2 Scanning JFFS2 FS: ........ done. Compression: NONE frag count: 680 compressed sum: 50646 uncompressed sum: 50646 Compression: ZERO frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: RTIME frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: RUBINMIPS frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: COPY frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: DYNRUBIN frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: ZLIB frag count: 6929 compressed sum: 10983998 uncompressed sum: 20297040 Compression: LZO frag count: 0 compressed sum: 0 uncompressed sum: 0 PogoE02>
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug, NSA325, NSA320 April 03, 2015 11:52PM |
Admin Registered: 13 years ago Posts: 19,102 |
PogoE02> fsinfo ### filesystem type is JFFS2 Scanning JFFS2 FS: ........... done. Compression: NONE frag count: 1092 compressed sum: 86387 uncompressed sum: 86387 Compression: ZERO frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: RTIME frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: RUBINMIPS frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: COPY frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: DYNRUBIN frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: ZLIB frag count: 7989 compressed sum: 14916582 uncompressed sum: 26528766 Compression: LZO frag count: 313 compressed sum: 853005 uncompressed sum: 1244549
DockStar> fsinfo f s i n f o ### filesystem type is JFFS2 Scanning JFFS2 FS: ........ done. Compression: NONE frag count: 846 compressed sum: 55953 uncompressed sum: 55953 Compression: ZERO frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: RTIME frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: RUBINMIPS frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: COPY frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: DYNRUBIN frag count: 0 compressed sum: 0 uncompressed sum: 0 Compression: ZLIB frag count: 10342 compressed sum: 15862256 uncompressed sum: 31016975 Compression: LZO frag count: 0 compressed sum: 0 uncompressed sum: 0 DockStar>
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug, NSA325, NSA320 April 05, 2015 12:53AM |
Admin Registered: 13 years ago Posts: 19,102 |
CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_LZO=y