NSA 320 possible messedup Env February 25, 2024 07:05AM |
Registered: 9 months ago Posts: 52 |
Re: NSA 320 possible messedup Env February 25, 2024 08:49AM |
Registered: 9 months ago Posts: 52 |
Re: NSA 320 possible messedup Env February 25, 2024 12:07PM |
Registered: 9 months ago Posts: 52 |
Re: NSA 320 possible messedup Env February 25, 2024 02:06PM |
Admin Registered: 13 years ago Posts: 19,102 |
Quote
Hi i'm Robert "th3l0lb0y" from germany
i hope my english isn´t to bad
dtb_file=/boot/dts/kirkwood-dns320.dtb
dtb_file=/boot/dts/kirkwood-nsa320.dtb
setenv dtb_file '/boot/dts/kirkwood-nsa320.dtb' bootAfter booted into Debian, you can set it permanently using fw_setenv:
fw_setenv dtb_file '/boot/dts/kirkwood-nsa320.dtb'
Re: NSA 320 possible messedup Env February 25, 2024 02:24PM |
Registered: 9 months ago Posts: 52 |
Re: NSA 320 possible messedup Env February 25, 2024 02:29PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: NSA 320 possible messedup Env February 25, 2024 02:50PM |
Registered: 9 months ago Posts: 52 |
Re: NSA 320 possible messedup Env February 25, 2024 03:51PM |
Admin Registered: 13 years ago Posts: 19,102 |
Quote
i have another question is it possible to get the buttons to work for like (power off )
Quote
Key daemon (button control)
Multimedia keyboard daemon for Linux
How to use set up button to reboot or shutdown with Key Daemon (esekeyd)
Shutdown with Power button with regret option by esekeyd
Quote
And the LED´s for hdd activity
echo ide-disk1 > /sys/class/leds/nsa320:green:hdd1/trigger echo ide-disk2 > /sys/class/leds/nsa320:green:hdd2/trigger
Quote
and do you have another debian build (older like debian 11) or an hint were i can find it ? ^^
Quote
Updated 26 Sept 2021:
Basic Debian bullseye Kirkwood rootfs for most Kirwood plugs:
Re: NSA 320 possible messedup Env February 26, 2024 03:42AM |
Registered: 9 months ago Posts: 52 |
Re: NSA 320 possible messedup Env February 26, 2024 01:42PM |
Admin Registered: 13 years ago Posts: 19,102 |
boot_sata1=mw 0x800000 0 1; setenv bootargs console=ttyS0,115200 root=/dev/sda1 rootdelay=10 $mtdparts; ide reset; ext2load ide 0:1 0x800000 /boot/uImage; ext2load ide 0:1 0x01100000 /boot/uInitrd; bootm 0x00800000 0x01100000 boot_sata2=mw 0x800000 0 1; setenv bootargs console=ttyS0,115200 root=/dev/sdb1 rootdelay=10 $mtdparts; ide reset; ext2load ide 1:1 0x800000 /boot/uImage; ext2load ide 1:1 0x01100000 /boot/uInitrd; bootm 0x00800000 0x01100000
Re: NSA 320 possible messedup Env February 26, 2024 06:26PM |
Registered: 9 months ago Posts: 52 |
Re: NSA 320 possible messedup Env February 26, 2024 08:20PM |
Admin Registered: 13 years ago Posts: 19,102 |
uname -a mount df -h ls -l /sys/class/leds/ cat /sys/class/leds/nsa320:green:hdd1/trigger cat /sys/class/leds/nsa320:green:hdd2/trigger
Re: NSA 320 possible messedup Env February 27, 2024 05:30AM |
Registered: 9 months ago Posts: 52 |
Linux debian 6.5.7-kirkwood-tld-1 #2 PREEMPT Wed Oct 18 21:14:11 PDT 2023 armv5tel GNU/Linux sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) udev on /dev type devtmpfs (rw,nosuid,relatime,size=245992k,nr_inodes=61498,mode=755) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,nodev,noexec,relatime,size=49868k,mode=755) /dev/sdc1 on / type ext3 (rw,noatime,errors=remount-ro) securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot) bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700) systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct) mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime) nfsd on /proc/fs/nfsd type nfsd (rw,relatime) debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime) tracefs on /sys/kernel/tracing type tracefs (rw,nosuid,nodev,noexec,relatime) fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime) configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime) tmpfs on /tmp type tmpfs (rw,relatime) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,nosuid,nodev,noexec,relatime) sunrpc on /run/rpc_pipefs type rpc_pipefs (rw,relatime) Filesystem Size Used Avail Use% Mounted on udev 241M 0 241M 0% /dev tmpfs 49M 1.3M 48M 3% /run /dev/sdc1 11G 1.6G 8.1G 17% / tmpfs 244M 0 244M 0% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 244M 0 244M 0% /tmp total 0 drwxr-xr-x 2 root root 0 Jan 1 1970 . drwxr-xr-x 48 root root 0 Jan 1 1970 .. lrwxrwxrwx 1 root root 0 Jan 1 1970 nsa320:green:copy -> ../../devices/platform/gpio-leds/leds/nsa320:green:copy lrwxrwxrwx 1 root root 0 Jan 1 1970 nsa320:green:hdd1 -> ../../devices/platform/gpio-leds/leds/nsa320:green:hdd1 lrwxrwxrwx 1 root root 0 Jan 1 1970 nsa320:green:hdd2 -> ../../devices/platform/gpio-leds/leds/nsa320:green:hdd2 lrwxrwxrwx 1 root root 0 Jan 1 1970 nsa320:green:sys -> ../../devices/platform/gpio-leds/leds/nsa320:green:sys lrwxrwxrwx 1 root root 0 Jan 1 1970 nsa320:green:usb -> ../../devices/platform/gpio-leds/leds/nsa320:green:usb lrwxrwxrwx 1 root root 0 Jan 1 1970 nsa320:orange:sys -> ../../devices/platform/gpio-leds/leds/nsa320:orange:sys lrwxrwxrwx 1 root root 0 Jan 1 1970 nsa320:red:copy -> ../../devices/platform/gpio-leds/leds/nsa320:red:copy lrwxrwxrwx 1 root root 0 Jan 1 1970 nsa320:red:hdd1 -> ../../devices/platform/gpio-leds/leds/nsa320:red:hdd1 lrwxrwxrwx 1 root root 0 Jan 1 1970 nsa320:red:hdd2 -> ../../devices/platform/gpio-leds/leds/nsa320:red:hdd2 [none] usb-gadget usb-host kbd-scrolllock kbd-numlock kbd-capslock kbd-kanalock kbd-shiftlock kbd-altgrlock kbd-ctrllock kbd-altlock kbd-shiftllock kbd-shiftrlock kbd-ctrlllock kbd-ctrlrlock f1072004.mdio-bus-mii:01:link f1072004.mdio-bus-mii:01:1Gbps f1072004.mdio-bus-mii:01:100Mbps f1072004.mdio-bus-mii:01:10Mbps usbport timer oneshot disk-activity disk-read disk-write ide-disk1 ide-disk2 mtd nand-disk heartbeat gpio cpu cpu0 default-on panic [none] usb-gadget usb-host kbd-scrolllock kbd-numlock kbd-capslock kbd-kanalock kbd-shiftlock kbd-altgrlock kbd-ctrllock kbd-altlock kbd-shiftllock kbd-shiftrlock kbd-ctrlllock kbd-ctrlrlock f1072004.mdio-bus-mii:01:link f1072004.mdio-bus-mii:01:1Gbps f1072004.mdio-bus-mii:01:100Mbps f1072004.mdio-bus-mii:01:10Mbps usbport timer oneshot disk-activity disk-read disk-write ide-disk1 ide-disk2 mtd nand-disk heartbeat gpio cpu cpu0 default-on panic
Re: NSA 320 possible messedup Env February 27, 2024 02:19PM |
Admin Registered: 13 years ago Posts: 19,102 |
Filesystem Size Used Avail Use% Mounted on udev 241M 0 241M 0% /dev tmpfs 49M 1.3M 48M 3% /run /dev/sdc1 11G 1.6G 8.1G 17% / tmpfs 244M 0 244M 0% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 244M 0 244M 0% /tmp total 0
Re: NSA 320 possible messedup Env February 27, 2024 02:43PM |
Registered: 9 months ago Posts: 52 |
Re: NSA 320 possible messedup Env February 28, 2024 12:02PM |
Registered: 9 months ago Posts: 52 |
Re: NSA 320 possible messedup Env February 28, 2024 01:49PM |
Admin Registered: 13 years ago Posts: 19,102 |
Quote
Perfornance Tuning & Benchmarks
Pogo ProV3 vs Pogo E02
Another Pogo Pro V3 benchmarks
Network performance - SAMBA - NFS (various protocols)
Pogo Pro V3 Network NFS benchmarks
Kirkwood vs OXNAS network performance (with flow control)
Kirkwood vs OXNAS network performance (flow control turned off )
OXNAS vs OXNAS network performance (flow control turned off)
Samba Tuning
Mount NTFS with big_writes
Increase NFSD max_block_size
Reduce NFSD threads
Re: NSA 320 possible messedup Env February 28, 2024 03:42PM |
Registered: 9 months ago Posts: 52 |
when i test ethtool -A it say´s ethtool: bad command line argument(s) For more information run ethtool -h an with ethtool -A eth0 rx off tx off Cannot get device pause settings: Operation not supported
Re: NSA 320 possible messedup Env February 28, 2024 04:35PM |
Registered: 9 months ago Posts: 52 |
1183.731484][ T7311] __nand_correct_data: uncorrectable ECC error [ 1183.753539][ T7311] __nand_correct_data: uncorrectable ECC error [ 1183.759599][ T7311] print_req_error: I/O error, dev mtdblock8, sector 0 flags 0 [ 1183.783533][ T7311] Buffer I/O error on dev mtdblock8, logical block 0, async page read
Re: NSA 320 possible messedup Env February 28, 2024 06:15PM |
Admin Registered: 13 years ago Posts: 19,102 |
> 1183.731484][ T7311] __nand_correct_data: > uncorrectable ECC error > [ 1183.753539][ T7311] __nand_correct_data: > uncorrectable ECC error > [ 1183.759599][ T7311] print_req_error: I/O error, > dev mtdblock8, sector 0 flags 0 > [ 1183.783533][ T7311] Buffer I/O error on dev > mtdblock8, logical block 0, async page read > >
fw_printenv mtdpartsIt should show
mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2)and
cat /proc/mtdIt should show:
dev: size erasesize name mtd0: 00100000 00020000 "uboot" mtd1: 00080000 00020000 "uboot_env" mtd2: 00080000 00020000 "key_store" mtd3: 00080000 00020000 "info" mtd4: 00a00000 00020000 "etc" mtd5: 00a00000 00020000 "kernel_1" mtd6: 02fc0000 00020000 "rootfs1" mtd7: 00a00000 00020000 "kernel_2" mtd8: 02fc0000 00020000 "rootfs2"
fw_setenv mtdparts 'mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env_stock)'Note that we are using only mtd0 for both new u-boot and u-boot envs. So we don't really need mtd1 (uboot_env_stock), but I included it for future convenience when I need to look at it.
cat /proc/mtd
Re: NSA 320 possible messedup Env February 28, 2024 06:40PM |
Registered: 9 months ago Posts: 52 |
mtdparts=nand_mtd
mtd0: 00100000 00020000 "uboot" mtd1: 00080000 00020000 "uboot_env" mtd2: 00080000 00020000 "key_store" mtd3: 00080000 00020000 "info" mtd4: 00a00000 00020000 "etc" mtd5: 00a00000 00020000 "kernel_1" mtd6: 02fc0000 00020000 "rootfs1" mtd7: 00a00000 00020000 "kernel_2" mtd8: 02fc0000 00020000 "rootfs2"
Re: NSA 320 possible messedup Env March 01, 2024 05:29AM |
Registered: 9 months ago Posts: 52 |
Re: NSA 320 possible messedup Env March 01, 2024 01:38PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: NSA 320 possible messedup Env March 01, 2024 03:34PM |
Registered: 9 months ago Posts: 52 |
Re: NSA 320 possible messedup Env March 01, 2024 03:43PM |
Registered: 9 months ago Posts: 52 |
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:46:11 -0700) ZyXEL NSA320 2-Bay Power Media Server SoC: Kirkwood 88F6281_A1 DRAM: 512 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 MV88E1318 PHY initialized on egiga0 Using egiga0 device host 192.168.178.82 is alive Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Zyxel NSA320 [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env_stock) init=/bin/systemd [ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000][ T0] Memory: 494676K/524288K available (9216K kernel code, 868K rwdata, 3400K rodata, 1024K init, 301K bss, 29612K reserved, 0K cma-reserved) [ 0.000000][ T0] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000009][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000048][ T0] Switching to timer-based delay loop, resolution 5ns [ 0.000800][ T0] Console: colour dummy device 80x30 [ 0.000851][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.000877][ T0] pid_max: default: 32768 minimum: 301 [ 0.001250][ T0] LSM: Security Framework initializing [ 0.001433][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001461][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002312][ T0] *** VALIDATE proc *** [ 0.002571][ T0] *** VALIDATE cgroup1 *** [ 0.002596][ T0] *** VALIDATE cgroup2 *** [ 0.002693][ T0] CPU: Testing write buffer coherency: ok [ 0.004379][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.004701][ T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.004984][ T1] rcu: Hierarchical SRCU implementation. [ 0.008302][ T1] devtmpfs: initialized [ 0.014621][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.014653][ T1] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.014895][ T1] xor: measuring software checksum speed [ 0.110117][ T1] arm4regs : 1084.400 MB/sec [ 0.210078][ T1] 8regs : 654.000 MB/sec [ 0.310070][ T1] 32regs : 950.800 MB/sec [ 0.310089][ T1] xor: using function: arm4regs (1084.400 MB/sec) [ 0.310110][ T1] prandom: seed boundary self test passed [ 0.314287][ T1] prandom: 100 self tests passed [ 0.314299][ T1] pinctrl core: initialized pinctrl subsystem [ 0.315719][ T1] NET: Registered protocol family 16 [ 0.316299][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.317096][ T1] audit: initializing netlink subsys (disabled) [ 0.318336][ T14] audit: type=2000 audit(0.310:1): state=initialized audit_enabled=0 res=1 [ 0.318455][ T1] cpuidle: using governor ladder [ 0.318531][ T1] cpuidle: using governor menu [ 0.319114][ T1] Feroceon L2: Enabling L2 [ 0.319165][ T1] Feroceon L2: Cache support initialised. [ 0.325485][ T1] No ATAGs? [ 2.560055][ C0] random: fast init done [ 6.252264][ T71] alg: No test for lzo-rle (lzo-rle-generic) [ 6.252621][ T73] alg: No test for lzo-rle (lzo-rle-scomp) [ 6.430666][ T1] raid6: int32x8 gen() 128 MB/s [ 6.600322][ T1] raid6: int32x8 xor() 86 MB/s [ 6.770129][ T1] raid6: int32x4 gen() 130 MB/s [ 6.940240][ T1] raid6: int32x4 xor() 84 MB/s [ 7.110416][ T1] raid6: int32x2 gen() 133 MB/s [ 7.280194][ T1] raid6: int32x2 xor() 94 MB/s [ 7.450400][ T1] raid6: int32x1 gen() 100 MB/s [ 7.620406][ T1] raid6: int32x1 xor() 69 MB/s [ 7.620417][ T1] raid6: using algorithm int32x2 gen() 133 MB/s [ 7.620426][ T1] raid6: .... xor() 94 MB/s, rmw enabled [ 7.620435][ T1] raid6: using intx1 recovery algorithm [ 7.620688][ T1] vgaarb: loaded [ 7.621194][ T1] SCSI subsystem initialized [ 7.621694][ T1] usbcore: registered new interface driver usbfs [ 7.621763][ T1] usbcore: registered new interface driver hub [ 7.621849][ T1] usbcore: registered new device driver usb [ 7.622030][ T1] pps_core: LinuxPPS API ver. 1 registered [ 7.622042][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 7.622070][ T1] PTP clock support registered [ 7.623411][ T1] clocksource: Switched to clocksource orion_clocksource [ 8.654582][ T1] VFS: Disk quotas dquot_6.6.0 [ 8.654679][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.664517][ T1] NET: Registered protocol family 2 [ 8.665332][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 8.665369][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 8.665427][ T1] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 8.665480][ T1] TCP: Hash tables configured (established 4096 bind 4096) [ 8.665577][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 8.665604][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 8.665835][ T1] NET: Registered protocol family 1 [ 8.666477][ T1] RPC: Registered named UNIX socket transport module. [ 8.666491][ T1] RPC: Registered udp transport module. [ 8.666499][ T1] RPC: Registered tcp transport module. [ 8.666507][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.666522][ T1] PCI: CLS 0 bytes, default 32 [ 8.666764][ T1] Trying to unpack rootfs image as initramfs... [ 9.508568][ T1] Freeing initrd memory: 9488K [ 9.508777][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 9.509992][ T1] Initialise system trusted keyrings [ 9.510043][ T1] Key type blacklist registered [ 9.510258][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 9.510368][ T1] zbud: loaded [ 9.511472][ T1] NFS: Registering the id_resolver key type [ 9.511504][ T1] Key type id_resolver registered [ 9.511514][ T1] Key type id_legacy registered [ 9.511534][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 9.511551][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 9.511845][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 9.512082][ T1] fuse: init (API version 7.31) [ 9.512468][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 9.512656][ T1] orangefs_init: module version upstream loaded [ 9.512668][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 9.529858][ T1] async_tx: api initialized (async) [ 9.529883][ T1] Key type asymmetric registered [ 9.529893][ T1] Asymmetric key parser 'x509' registered [ 9.529965][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 9.531412][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 9.533374][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00 [ 9.533396][ T1] pci_bus 0000:00: root bus resource [bus 00-ff] [ 9.533525][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 9.533542][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 9.533672][ T1] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 9.533712][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 9.535252][ T1] PCI: bus0: Fast back to back transfers disabled [ 9.535279][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 9.536756][ T1] PCI: bus1: Fast back to back transfers enabled [ 9.536782][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 9.536985][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe00007ff pref] [ 9.537003][ T1] pci 0000:00:01.0: PCI bridge to [bus 01] [ 9.537645][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 9.594221][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 9.596205][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 9.654225][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 9.656489][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 9.657775][ T1] printk: console [ttyS0] disabled [ 9.657847][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 10.499387][ T1] printk: console [ttyS0] enabled [ 10.511857][ T1] loop: module loaded [ 10.516354][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 10.524757][ T1] scsi host0: sata_mv [ 10.529211][ T1] scsi host1: sata_mv [ 10.533375][ T1] ata1: SATA max UDMA/133 irq 33 [ 10.538256][ T1] ata2: SATA max UDMA/133 irq 33 [ 10.544108][ T1] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 10.551288][ T1] nand: Samsung NAND 128MiB 3,3V 8-bit [ 10.556655][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 10.564989][ T1] Scanning device for bad blocks [ 10.589564][ T1] Bad eraseblock 205 at 0x0000019a0000 [ 10.596700][ T1] Bad eraseblock 224 at 0x000001c00000 [ 10.602756][ T1] Bad eraseblock 232 at 0x000001d00000 [ 10.622160][ T1] Bad eraseblock 379 at 0x000002f60000 [ 10.632171][ T1] Bad eraseblock 428 at 0x000003580000 [ 10.646885][ T1] Bad eraseblock 526 at 0x0000041c0000 [ 10.658133][ T1] Bad eraseblock 588 at 0x000004980000 [ 10.696845][ T1] Bad eraseblock 936 at 0x000007500000 [ 10.710549][ T1] 2 cmdlinepart partitions found on MTD device orion_nand [ 10.717563][ T1] Creating 2 MTD partitions on "orion_nand": [ 10.723446][ T1] 0x000000000000-0x000000100000 : "uboot" [ 10.730357][ T1] 0x000000100000-0x000000180000 : "uboot_env_stock" [ 10.739298][ T1] libphy: Fixed MDIO Bus: probed [ 10.744942][ T1] libphy: orion_mdio_bus: probed [ 10.763782][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 10.771830][ T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set [ 10.779273][ T1] mv643xx_eth: Set the PHY to fix link down [ 10.780079][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c8:6c:87:9b:2f:78 [ 10.795582][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.802900][ T1] ehci-pci: EHCI PCI platform driver [ 10.808187][ T1] ehci-orion: EHCI orion driver [ 10.813106][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 10.819418][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 10.828047][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 10.863437][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 10.870476][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 10.879577][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.887555][ T1] usb usb1: Product: EHCI Host Controller [ 10.893158][ T1] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd [ 10.900520][ T1] usb usb1: SerialNumber: f1050000.ehci [ 10.906582][ T1] hub 1-0:1.0: USB hub found [ 10.911088][ T1] hub 1-0:1.0: 1 port detected [ 10.916494][ T1] usbcore: registered new interface driver usb-storage [ 10.923655][ T1] mousedev: PS/2 mouse device common for all mice [ 10.930505][ T1] rtc-mv f1010300.rtc: registered as rtc0 [ 10.936316][ T1] i2c /dev entries driver [ 10.943277][ T1] rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable. [ 10.951631][ T1] rtc-pcf8563 0-0051: registered as rtc1 [ 10.958853][ T1] device-mapper: uevent: version 1.0.3 [ 10.964515][ T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 10.974125][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 10.981384][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 10.988795][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 10.996247][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 11.003072][ T1] device-mapper: raid: Loading target version 1.14.0 [ 11.011684][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 11.018180][ T1] drop_monitor: Initializing network drop monitor service [ 11.025634][ T1] NET: Registered protocol family 17 [ 11.031042][ T1] Key type dns_resolver registered [ 11.036920][ T1] registered taskstats version 1 [ 11.041735][ T1] Loading compiled-in X.509 certificates [ 11.047315][ T112] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 11.054417][ T1] zswap: loaded using pool lzo/zbud [ 11.083832][ T112] ata1.00: HPA detected: current 1953523055, native 1953525168 [ 11.091286][ T112] ata1.00: ATA-7: SAMSUNG HD103SI, 1AG01113, max UDMA7 [ 11.100882][ T112] ata1.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 11.151969][ T112] ata1.00: configured for UDMA/133 [ 11.174110][ T7] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1113 PQ: 0 ANSI: 5 [ 11.189013][ T1] Key type big_key registered [ 11.194675][ T116] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.213726][ T116] sd 0:0:0:0: [sda] Write Protect is off [ 11.219424][ T116] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.262948][ T116] sd 0:0:0:0: [sda] Attached SCSI disk [ 11.270583][ T1] Key type encrypted registered [ 11.277403][ T1] rtc-mv f1010300.rtc: setting system clock to 2024-03-01T22:36:55 UTC (1709332615) [ 11.286746][ T15] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 11.495182][ T15] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63 [ 11.504152][ T15] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 11.512066][ T15] usb 1-1: Product: USB2.0 Hub [ 11.517580][ T15] hub 1-1:1.0: USB hub found [ 11.522425][ T15] hub 1-1:1.0: 4 ports detected [ 11.703449][ T114] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 11.733680][ T114] ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 11.740432][ T114] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 11.773704][ T114] ata2.00: configured for UDMA/133 [ 11.789253][ T23] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1118 PQ: 0 ANSI: 5 [ 11.799111][ T116] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.807948][ T116] sd 1:0:0:0: [sdb] Write Protect is off [ 11.813627][ T116] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.829126][ T116] sd 1:0:0:0: [sdb] Attached SCSI disk [ 11.837430][ T1] Freeing unused kernel memory: 1024K [ 11.843463][ T15] usb 1-1.1: new high-speed USB device number 3 using orion-ehci [ 11.854060][ T1] Checked W+X mappings: passed, no W+X pages found [ 11.860448][ T1] Run /init as init process Loading, please wait... Starting version 241 [ 12.015578][ T15] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00 [ 12.033491][ T15] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 12.041540][ T15] usb 1-1.1: Product: Ultra Fit [ 12.063521][ T15] usb 1-1.1: Manufacturer: SanDisk [ 12.068519][ T15] usb 1-1.1: SerialNumber: 4C530001240106114145 [ 12.091463][ T15] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 12.117970][ T15] scsi host2: usb-storage 1-1.1:1.0 [ 12.125519][ T161] usbcore: registered new interface driver uas [ 13.205051][ T116] scsi 2:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 13.223569][ T23] sd 2:0:0:0: [sdc] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB) [ 13.239522][ T23] sd 2:0:0:0: [sdc] Write Protect is off [ 13.250744][ T23] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 13.278364][ T23] sdc: sdc1 sdc2 [ 13.295866][ T23] sd 2:0:0:0: [sdc] Attached SCSI removable disk Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.33.1 [/sbin/fsck.ext3 (1) -- /dev/sdc1] fsck.ext3 -a -C0 /dev/sdc1 rootfs: clean, 49210/677280 files, 433864/2704128 blocks done. [ 23.879613][ T194] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem [ 23.929030][ T194] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 25.046127][ T1] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 25.175222][ T1] systemd[1]: Inserted module 'autofs4' [ 25.230081][ T1] NET: Registered protocol family 10 [ 25.236565][ T1] Segment Routing with IPv6 [ 25.318191][ T1] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 25.341083][ T1] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 10 (buster)! [ 25.385578][ T1] systemd[1]: Set hostname to <Vault-111>. [ 26.375772][ C0] random: crng init done [ 27.535810][ T1] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 27.553825][ T1] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 27.975934][ T1] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly. [ 28.043879][ T1] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly. [ 28.189010][ T1] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly. [ 28.324363][ T1] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 28.364708][ T1] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Created slice User and Session Slice. [ OK ] Listening on Syslog Socket. [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket. Mounting NFSD configuration filesystem... Starting Load Kernel Modules... Starting Availability of block devices... [ OK ] Reached target Slices. Mounting POSIX Message Queue File System... [ OK ] Listening on Device-mapper event daemon FIFOs. Starting Monitoring of LVM…meventd or progress polling... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Set up automount Arbitrary…s File System Automount Point. [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on Journal Audit Socket. Starting Journal Service... [ OK ] Listening on Network Service Netlink Socket. Starting Create list of re…odes for the current kernel... [ OK ] Reached target Swap. Mounting Kernel Debug File System... [ OK ] Listening on fsck to fsckd communication Socket. Starting Remount Root and Kernel File Systems... [ OK ] Listening on udev Control Socket. Starting udev Coldplug all Devices... Mounting RPC Pipe File System... [ OK ] Reached target Local Encrypted Volumes. [ OK ] Created slice system-getty.slice. [ OK ] Listening on LVM2 poll daemon socket. [ OK ] Mounted NFSD configuration filesystem. [ OK ] Started Load Kernel Modules. [ OK ] Started Availability of block devices. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Monitoring of LVM2… dmeventd or progress p[ 29.467957][ T240] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro olling. [ OK ] Started Create list of req… nodes for the current kernel. [ OK ] Mounted Kernel Debug File System. [ OK ] Started Journal Service. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Mounted RPC Pipe File System. Starting pNFS block layout mapping daemon... Starting Load/Save Random Seed... Starting Create System Users... Starting Flush Journal to Persistent Storage... Mounting FUSE Control File System... Starting Apply Kernel Variables... [ OK ] Started pNFS block layout mapping daemon. [ OK ] Mounted FUSE Control File System. [ OK ] Started Load/Save Random Seed. [ OK ] Started Create System Users. [ 30.355493][ T234] systemd-journald[234]: Received request to flush runtime journal from PID 1 Starting Create Static Device Nodes in /dev... [ OK ] Started Apply Kernel Variables. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Coldplug all Devices. Starting Helper to synchronize boot up for ifupdown... [ OK ] Started Helper to synchronize boot up for ifupdown. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting Mount /tmp as tmp…e access to the root device... Starting udev Kernel Device Manager... [ OK ] Mounted Mount /tmp as tmpf…ite access to the root device. [ OK ] Reached target Local File Systems. Starting Raise network interfaces... Starting Create Volatile Files and Directories... Starting Cleanup monit state file... Starting Preprocess NFS configuration... Starting Cleanup PHP session files... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Cleanup monit state file. [ OK ] Started Preprocess NFS configuration. Starting NFSv4 ID-name mapping service... [ OK ] Reached target NFS client services. Starting Network Service... [ OK ] Started Cleanup PHP session files. [ OK ] Started NFSv4 ID-name mapping service. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting RPC bind portmap service... [ OK ] Started RPC bind portmap service. [ OK ] Reached target RPC Port Mapper. [ OK ] Started Network Service. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily man-db regeneration. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Avahi mDNS/DNS-SD Stack... Starting Login Service... [ OK ] Started Self Monitoring an…ing Technology (SMART) Daemon. Starting System Logging Service... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. Starting WPA supplicant... [ OK ] Started Trigger anacron every hour. [ OK ] Started Run anacron jobs. [ OK ] Started Clean PHP session files every 30 mins. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. Starting Network Name Resolution... Starting Wait for Network to be Configured... [ OK ] Started System Logging Service. [[ 32.234056][ T283] mv643xx_eth: Set the PHY back to auto-negotiation mode [ 33.518840][ T263] input: gpio_keys as /devices/platform/gpio_keys/input/input0 OK ] Started Raise network interfaces. [ OK ] Started Login Service. [ 34.774601][ T280] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range [ OK ] Found device /dev/ttyS0. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Network Name Resolution. [ OK ] Started WPA supplica[ 35.157505][ T280] watchdog: f1020300.watchdog-timer: falling back to default timeout (21) nt. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target Network. Starting NFS Mount Daemon... Starting A high performanc… and a reverse proxy server... Starting The PHP 7.3 FastCGI Process Manager... [ 35.518730][ T280] orion_wdt: Initial timeout 21 sec Starting OpenBSD Secure Shell server... Starting The OpenMediaVaul…t processes the RPC request... [ 35.841865][ T263] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 36.017231][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 36.028082][ T15] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 36.200473][ T281] marvell-cesa f1030000.crypto: CESA device successfully registered [ OK ] Started Wait for Network to be Configured. [ OK ] Reached target Network is Online. [ 36.374710][ T263] sd 1:0:0:0: Attached scsi generic sg1 type 0 Starting /etc/rc.local Compatibility... [ OK ] Started Web Services Dynamic Discovery host daemon. Starting Generate the prelogin message... Starting Samba NMB Daemon... [ 36.753909][ T263] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started NFS Mount Daemon. Starting NFS server and services... [ 37.806273][ T385] md0: detected capacity change from 0 to 2000137748480 [ 39.098181][ T391] NFSD: Using UMH upcall client tracking operations. [ 39.132898][ T391] NFSD: starting 90-second grace period (net f000001c) [ OK ] Started NFS server and services. [ OK ] Started The OpenMediaVault…hat processes the RPC request. [ OK ] Started A high performance…er and a reverse proxy server. [ OK ] Started The PHP 7.3 FastCGI Process Manager. [ OK ] Found device /dev/disk/by-…4-bf27-43f1-bcfc-07ce1e578062. [ OK ] Started Samba NMB Daemon. Starting Samba SMB Daemon... Starting File System Check…bf27-43f1-bcfc-07ce1e578062... [ OK ] Reached target Remote File Systems (Pre). [ OK ] Started File System Check Daemon to report status. [ OK ] Started File System Check …4-bf27-43f1-bcfc-07ce1e578062. Mounting /srv/dev-disk-by-…bf27-43f1-bcfc-07ce1e578062... [ 46.644783][ T448] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem [ OK ] Started Samba SMB Daemon. [ 49.438723][ T448] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl [ OK ] Mounted /srv/dev-disk-by-u…4-bf27-43f1-bcfc-07ce1e578062. Starting File System Quota Check... [ OK ] Started File System Quota Check. Starting Enable File System Quotas... [ OK ] Started Enable File System Quotas. [ OK ] Reached target Remote File Systems. Starting LSB: Load kernel …d to enable cpufreq scaling... Starting LSB: Starts syslogd... Starting LSB: start or stop rrdcached... [ OK ] Started Regular background program processing daemon. Starting LSB: service and resource monitoring daemon... Starting Permit User Sessions... [ OK ] Started LSB: Starts syslogd. [ OK ] Started Permit User Sessions. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. Starting LSB: Starts klogd... [ OK ] Started LSB: Starts klogd. [ OK ] Started LSB: service and resource monitoring daemon. [ OK ] Started LSB: start or stop rrdcached. Starting Statistics collection and monitoring daemon... [ OK ] Started Statistics collection and monitoring daemon. [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling. Starting LSB: set CPUFreq kernel parameters... [ OK ] Started LSB: set CPUFreq kernel parameters. openmediavault 5.6.26-1 (Usul) Vault-111 ttyS0 Copyright (C) 2009-2022 by Volker Theile. All rights reserved. To manage the system visit the openmediavault web control panel: enxa0cec8fc2a08: 192.168.178.138 eth0: 192.168.178.137 By default the web control panel administrator account has the username 'admin' and password 'openmediavault'. It is recommended that you change the password for this account within the web control panel or using the 'omv-firstaid' CLI command. For more information regarding this appliance, please visit the web site: https://www.openmediavault.org Vault-111 login: openmediavault 5.6.26-1 (Usul) Vault-111 ttyS0 Copyright (C) 2009-2022 by Volker Theile. All rights reserved. To manage the system visit the openmediavault web control panel: eth0: 192.168.178.137 By default the web control panel administrator account has the username 'admin' and password 'openmediavault'. It is recommended that you change the password for this account within the web control panel or using the 'omv-firstaid' CLI command. For more information regarding this appliance, please visit the web site: https://www.openmediavault.org Vault-111 login: [ 110.673869][ T658] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
Re: NSA 320 possible messedup Env March 01, 2024 05:01PM |
Registered: 9 months ago Posts: 52 |
Re: NSA 320 possible messedup Env March 01, 2024 05:20PM |
Admin Registered: 13 years ago Posts: 19,102 |
Quote
Vault-111 login:
openmediavault 5.6.26-1 (Usul) Vault-111 ttyS0
Copyright (C) 2009-2022 by Volker Theile. All rights reserved.
To manage the system visit the openmediavault web control panel:
eth0: 192.168.178.137
Re: NSA 320 possible messedup Env March 01, 2024 06:18PM |
Registered: 9 months ago Posts: 52 |
testdownload with an my my internet connektion is 1Gbit and my nsa320 plugs into an 1gbit lan connector on my router 500mb testfile from http://speedtest.wdc01.softlayer.com/downloads/test500.zip /dev/md0 0%[ ] 751.98K 23.7KB/s eta 5h 58m
Network performance - SAMBA - NFS (various protocols) Pogo Pro V3 Network NFS benchmarks Kirkwood vs OXNAS network performance (with flow control) Kirkwood vs OXNAS network performance (flow control turned off ) OXNAS vs OXNAS network performance (flow control turned off)
Re: NSA 320 possible messedup Env March 01, 2024 06:54PM |
Admin Registered: 13 years ago Posts: 19,102 |
> Network performance - SAMBA - NFS > (various protocols) > Pogo Pro V3 Network NFS benchmarks > Kirkwood vs OXNAS network > performance (with flow control) > Kirkwood vs OXNAS network performance (flow > control turned off ) > OXNAS vs OXNAS network performance (flow control > turned off) >
Re: NSA 320 possible messedup Env March 01, 2024 07:39PM |
Registered: 9 months ago Posts: 52 |
First test Server listening on TCP port 5001 TCP window size: 208 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.178.70 port 5001 connected with 192.168.178.137 port 37054 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 723 MBytes 606 Mbits/sec ------------------------------------------------------------ Client connecting to 192.168.178.137, TCP port 5001 TCP window size: 867 MByte ------------------------------------------------------------ [ 4] local 192.168.178.116 port 59641 connected with 192.168.178.137 port 5001 [ 4] 0.0-10.0 sec 870 MBytes 728 Mbits/sec Second test ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 208 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.178.70 port 5001 connected with 192.168.178.137 port 37070 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 661 MBytes 554 Mbits/sec ------------------------------------------------------------ Client connecting to 192.168.178.137, TCP port 5001 TCP window size: 867 MByte ------------------------------------------------------------ [ 4] local 192.168.178.116 port 59672 connected with 192.168.178.137 port 5001 [ 4] 0.0-10.1 sec 886 MBytes 735 Mbits/sec