Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
Posted by JeffS
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 19, 2017 06:39PM |
Registered: 9 years ago Posts: 1,516 |
It didn't probably connect but here's the exact results just so you know:
Right now I'm putting a movie and ISO on another USB stick that will be copied to the newly-formatted Ext4 one using the ThinClient booting CinnoMint. One sec :-)
-update- No, taking the Ext4 USB stick back to the ThinClient running CinnoMint, after formatting it there an hour earlier wasn't enough permissions to copy an iso and movie over to the stick.
=========
-= Cloud 9 =-
Edited 2 time(s). Last edit at 03/19/2017 09:18PM by JoeyPogoPlugE02.
root@DebianPlug:~# df -h Filesystem Size Used Avail Use% Mounted on udev 10M 0 10M 0% /dev tmpfs 12M 400K 12M 4% /run /dev/sda1 7.1G 2.6G 4.2G 39% / tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 24M 0 24M 0% /run/shm tmpfs 60M 16K 60M 1% /tmp /dev/sdb1 29G 45M 27G 1% /media/JoeyUSB3 root@DebianPlug:~# cd /media/JoeyUSB3 root@DebianPlug:/media/JoeyUSB3# time cp -a /boot/vmlinu* . cp: cannot create regular file './vmlinuz-3.18.5-oxnas-tld-1': No space left on device cp: cannot create regular file './vmlinuz-4.4.48-oxnas-tld-1': No space left on device real 0m0.170s user 0m0.000s sys 0m0.130s root@DebianPlug:/media/JoeyUSB3# ls -lh vmlinu* ls: cannot access vmlinu*: No such file or directory root@DebianPlug:/media/JoeyUSB3# wget https://www.kernel.org/pub/linux/kernel/v4.x/linux-4.4.54.tar.xz converted 'https://www.kernel.org/pub/linux/kernel/v4.x/linux-4.4.54.tar.xz'; (ANSI_X3.4-1968) -> 'https://www.kernel.org/pub/linux/kernel/v4.x/linux-4.4.54.tar.xz'; (UTF-8) --2017-03-19 19:37:02-- https://www.kernel.org/pub/linux/kernel/v4.x/linux-4.4.54.tar.xz Resolving www.kernel.org (www.kernel.org)... 147.75.196.57, 2604:1380:1:3600::3 Connecting to www.kernel.org (www.kernel.org)|147.75.196.57|:443... connected. ERROR: The certificate of 'www.kernel.org' is not trusted. ERROR: The certificate of 'www.kernel.org' hasn't got a known issuer. root@DebianPlug:/media/JoeyUSB3# ls -lh linux-4.4.54.tar.xz ls: cannot access linux-4.4.54.tar.xz: No such file or directory root@DebianPlug:/media/JoeyUSB3# time tar xf linux-4.4.54.tar.xz tar: linux-4.4.54.tar.xz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now real 0m0.049s user 0m0.000s sys 0m0.020s root@DebianPlug:/media/JoeyUSB3#
Right now I'm putting a movie and ISO on another USB stick that will be copied to the newly-formatted Ext4 one using the ThinClient booting CinnoMint. One sec :-)
-update- No, taking the Ext4 USB stick back to the ThinClient running CinnoMint, after formatting it there an hour earlier wasn't enough permissions to copy an iso and movie over to the stick.
=========
-= Cloud 9 =-
Edited 2 time(s). Last edit at 03/19/2017 09:18PM by JoeyPogoPlugE02.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 19, 2017 08:01PM |
Admin Registered: 13 years ago Posts: 18,542 |
OK. So it does not look like it's working.
I guess I will need to set it up and see for myself if I got the same behavior!
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
I guess I will need to set it up and see for myself if I got the same behavior!
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 19, 2017 09:42PM |
Admin Registered: 13 years ago Posts: 18,542 |
JoeyPogoPlugE02 Wrote:
-------------------------------------------------------
> It didn't probably connect but here's the exact re
> sults just so you know:
>
>
> Right now I'm putting a movie and ISO on another U
> SB stick that will be copied to the newly-formatte
> d Ext4 one using the ThinClient booting CinnoMint.
> One sec :-)
>
> -update- No, taking the Ext4 USB stick back
> to the ThinClient running CinnoMint, after formatt
> ing it there an hour earlier wasn't enough permiss
> ions to copy an iso and movie over to the stick.
Ok, so it has nothing to do with the Pogo then :)
Try to get it work on Mint. If you can copy something to it while in Mint, then take the stick back to the Pogo!
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
-------------------------------------------------------
> It didn't probably connect but here's the exact re
> sults just so you know:
>
>
> root@DebianPlug:~# df -h > Filesystem Size Used Avail Use% Mounted on > udev 10M 0 10M 0% /dev > tmpfs 12M 400K 12M 4% /run > /dev/sda1 7.1G 2.6G 4.2G 39% / > tmpfs 5.0M 0 5.0M 0% /run/lock > tmpfs 24M 0 24M 0% /run/shm > tmpfs 60M 16K 60M 1% /tmp > /dev/sdb1 29G 45M 27G 1% /media/JoeyU > SB3 > root@DebianPlug:~# cd /media/JoeyUSB3 > root@DebianPlug:/media/JoeyUSB3# time cp -a /boot/ > vmlinu* . > cp: cannot create regular file './vmlinuz-3.18.5-o > xnas-tld-1': No space left on device > cp: cannot create regular file './vmlinuz-4.4.48-o > xnas-tld-1': No space left on device > > real 0m0.170s > user 0m0.000s > sys 0m0.130s > root@DebianPlug:/media/JoeyUSB3# ls -lh vmlinu* > ls: cannot access vmlinu*: No such file or directo > ry > root@DebianPlug:/media/JoeyUSB3# wget https://www. > kernel.org/pub/linux/kernel/v4.x/linux-4.4.54.tar. > xz > converted 'https://www.kernel.org/pub/linux/kernel > /v4.x/linux-4.4.54.tar.xz' (ANSI_X3.4-1968) -> 'ht > tps://www.kernel.org/pub/linux/kernel/v4.x/linux-4 > .4.54.tar.xz' (UTF-8) > --2017-03-19 19:37:02-- https://www.kernel.org/pu > b/linux/kernel/v4.x/linux-4.4.54.tar.xz > Resolving www.kernel.org (www.kernel.org)... 147.7 > 5.196.57, 2604:1380:1:3600::3 > Connecting to www.kernel.org (www.kernel.org)|147. > 75.196.57|:443... connected. > ERROR: The certificate of 'www.kernel.org' is not > trusted. > ERROR: The certificate of 'www.kernel.org' hasn't > got a known issuer. > root@DebianPlug:/media/JoeyUSB3# ls -lh linux-4.4. > 54.tar.xz > ls: cannot access linux-4.4.54.tar.xz: No such fil > e or directory > root@DebianPlug:/media/JoeyUSB3# time tar xf linux > -4.4.54.tar.xz > tar: linux-4.4.54.tar.xz: Cannot open: No such fil > e or directory > tar: Error is not recoverable: exiting now > > real 0m0.049s > user 0m0.000s > sys 0m0.020s > root@DebianPlug:/media/JoeyUSB3# > >>
> Right now I'm putting a movie and ISO on another U
> SB stick that will be copied to the newly-formatte
> d Ext4 one using the ThinClient booting CinnoMint.
> One sec :-)
>
> -update- No, taking the Ext4 USB stick back
> to the ThinClient running CinnoMint, after formatt
> ing it there an hour earlier wasn't enough permiss
> ions to copy an iso and movie over to the stick.
Ok, so it has nothing to do with the Pogo then :)
Try to get it work on Mint. If you can copy something to it while in Mint, then take the stick back to the Pogo!
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 19, 2017 10:56PM |
Registered: 9 years ago Posts: 1,516 |
bodhi Wrote:
-------------------------------------------------------
> Try to get it work on Mint. If you can copy someth
> ing to it while in Mint, then take the stick back
> to the Pogo!
Mint (at least the Live USB CinnoMint) wouldn't get past root permissions, even right after formatting and trying to copy over. Then I tried to make it a share and have permissions overwritten and that didn't work either. I'd think SanDisk Ultra was read-only if it weren't for Mint formatting it. Even Pogo couldn't write anything that I've seen so far.
My main Windows machine - which will be a few more days in maintenance mode - has a particular Linux driver that can copy to Ext2 and maybe Ext3 drives but not Ext4. So lacking other options I can try that soon.
I was going to ask if it's all the same if I were to format Ext2, which I haven't tried, but I suppose Ext2 uses more RAM because it's not Journaled?
Another thing, my neighbor says I can have their laptop's old hard drive, which might have enough life in it to plug into a USB 3 adapter and try that soon as well.
Do you think there maybe built-in protections in Pogoplug's SOC hardware to prevent that mpcie from writing? Or something isn't letting what's plugged-in write.
Also I have another Pogo Pro for last resort testing, and it isn't last resort yet LOL No really I have no room for more mess. I do this in a different room and have to plug in the SanDisk every boot up :-)
=========
-= Cloud 9 =-
-------------------------------------------------------
> Try to get it work on Mint. If you can copy someth
> ing to it while in Mint, then take the stick back
> to the Pogo!
Mint (at least the Live USB CinnoMint) wouldn't get past root permissions, even right after formatting and trying to copy over. Then I tried to make it a share and have permissions overwritten and that didn't work either. I'd think SanDisk Ultra was read-only if it weren't for Mint formatting it. Even Pogo couldn't write anything that I've seen so far.
My main Windows machine - which will be a few more days in maintenance mode - has a particular Linux driver that can copy to Ext2 and maybe Ext3 drives but not Ext4. So lacking other options I can try that soon.
I was going to ask if it's all the same if I were to format Ext2, which I haven't tried, but I suppose Ext2 uses more RAM because it's not Journaled?
Another thing, my neighbor says I can have their laptop's old hard drive, which might have enough life in it to plug into a USB 3 adapter and try that soon as well.
Do you think there maybe built-in protections in Pogoplug's SOC hardware to prevent that mpcie from writing? Or something isn't letting what's plugged-in write.
Also I have another Pogo Pro for last resort testing, and it isn't last resort yet LOL No really I have no room for more mess. I do this in a different room and have to plug in the SanDisk every boot up :-)
=========
-= Cloud 9 =-
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 19, 2017 11:20PM |
Admin Registered: 13 years ago Posts: 18,542 |
Joey,
> Mint (at least the Live USB CinnoMint) wouldn't ge
> t past root permissions
You don't need root for this USB drive. It is for testing pupose, so data is good enough.
Use the Mint menu (just like in Windows Start menu). Go to the Acessories submenu and format it as Ext2 or Ext4, does not matter. After you've formatted it, use the mouse/touchpad right button to eject (or safely remove) it. That way you can be sure that it was synched.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> Mint (at least the Live USB CinnoMint) wouldn't ge
> t past root permissions
You don't need root for this USB drive. It is for testing pupose, so data is good enough.
Use the Mint menu (just like in Windows Start menu). Go to the Acessories submenu and format it as Ext2 or Ext4, does not matter. After you've formatted it, use the mouse/touchpad right button to eject (or safely remove) it. That way you can be sure that it was synched.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 20, 2017 12:01AM |
Registered: 9 years ago Posts: 1,516 |
bodhi Wrote:
-------------------------------------------------------
> You don't need root for this USB drive. It is for
> testing pupose, so data is good enough.
>
> Use the Mint menu (just like in Windows Start menu
> ). Go to the Acessories submenu and format it as E
> xt2 or Ext4, does not matter. After you've formatt
> ed it, use the mouse/touchpad right button to ejec
> t (or safely remove) it. That way you can be sure
> that it was synched.
I'll list it :-)
1. I insert SanDisk USB 3 stick
2. Tell G-Parted to format to Ext3 and give it label
3. Unmount the stick so GParted can do it's job.
4. GParted finishes and I mount the drive again, newly formatted
5. I have another USB stick with an ISO and movie, to copy to the SanDisk USB stick, to try reading over LAN once this is re-mounted in Pogoplug.
6. Error says no, you need owner's permission to write to this stick (Sandisk)!
7. I check permissions and it's root and read only basically.
My longshot guess is that Live Mint doesn't allow the kind of permissions it might if this were installed on a hard drive.
* what does sync do then?
** bedtime ;-/
=========
-= Cloud 9 =-
-------------------------------------------------------
> You don't need root for this USB drive. It is for
> testing pupose, so data is good enough.
>
> Use the Mint menu (just like in Windows Start menu
> ). Go to the Acessories submenu and format it as E
> xt2 or Ext4, does not matter. After you've formatt
> ed it, use the mouse/touchpad right button to ejec
> t (or safely remove) it. That way you can be sure
> that it was synched.
I'll list it :-)
1. I insert SanDisk USB 3 stick
2. Tell G-Parted to format to Ext3 and give it label
3. Unmount the stick so GParted can do it's job.
4. GParted finishes and I mount the drive again, newly formatted
5. I have another USB stick with an ISO and movie, to copy to the SanDisk USB stick, to try reading over LAN once this is re-mounted in Pogoplug.
6. Error says no, you need owner's permission to write to this stick (Sandisk)!
7. I check permissions and it's root and read only basically.
My longshot guess is that Live Mint doesn't allow the kind of permissions it might if this were installed on a hard drive.
* what does sync do then?
** bedtime ;-/
=========
-= Cloud 9 =-
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 20, 2017 12:52AM |
Admin Registered: 13 years ago Posts: 18,542 |
Joey,
Are you running Cinamon desktop on Mint? if not can you switch to that?
And I'm not talking about Live. I meant do you have Mint with Cinamon Desktop on any of your laptop(s) or Thin Client(s)?
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/20/2017 12:54AM by bodhi.
Are you running Cinamon desktop on Mint? if not can you switch to that?
And I'm not talking about Live. I meant do you have Mint with Cinamon Desktop on any of your laptop(s) or Thin Client(s)?
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/20/2017 12:54AM by bodhi.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 20, 2017 11:02AM |
Registered: 9 years ago Posts: 1,516 |
bodhi Wrote:
-------------------------------------------------------
> Joey,
>
> Are you running Cinamon desktop on Mint? if not ca
> n you switch to that?
>
> And I'm not talking about Live. I meant do you hav
> e Mint with Cinamon Desktop on any of your laptop(
> s) or Thin Client(s)?
Right now I have no Mints installed on hard drives, I was using live USB sticks. For the next few days I'll be wrapping up maintenance on a few computers and should have a spare hard drive after that.
=========
-= Cloud 9 =-
Edited 1 time(s). Last edit at 03/20/2017 02:27PM by JoeyPogoPlugE02.
-------------------------------------------------------
> Joey,
>
> Are you running Cinamon desktop on Mint? if not ca
> n you switch to that?
>
> And I'm not talking about Live. I meant do you hav
> e Mint with Cinamon Desktop on any of your laptop(
> s) or Thin Client(s)?
Right now I have no Mints installed on hard drives, I was using live USB sticks. For the next few days I'll be wrapping up maintenance on a few computers and should have a spare hard drive after that.
=========
-= Cloud 9 =-
Edited 1 time(s). Last edit at 03/20/2017 02:27PM by JoeyPogoPlugE02.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 20, 2017 01:48PM |
Admin Registered: 13 years ago Posts: 18,542 |
Joey,
> Right now I have no Mints installed on hard drives
> , I was using live USB sticks. For the next few da
> ys I'll be wrapping up maintenance on a few comput
> ers and should have a spare hard drive after that.
It's a good idea! Live USB is good enough, but you're not runing the same system I'm running (Mint 18.x Cinamon) so it is a little hard for you to recognize right away what I posted (I assumed you did).
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> Right now I have no Mints installed on hard drives
> , I was using live USB sticks. For the next few da
> ys I'll be wrapping up maintenance on a few comput
> ers and should have a spare hard drive after that.
It's a good idea! Live USB is good enough, but you're not runing the same system I'm running (Mint 18.x Cinamon) so it is a little hard for you to recognize right away what I posted (I assumed you did).
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 20, 2017 07:20PM |
Registered: 9 years ago Posts: 1,516 |
bodhi Wrote:
-------------------------------------------------------
> It's a good idea! Live USB is good enough, but you
> 're not runing the same system I'm running (Mint 1
> 8.x Cinamon) so it is a little hard for you to rec
> ognize right away what I posted (I assumed you did
Yeah, anything Mint on live USB here is 18.1, favorite being XFCE (not nearby ATM though) as long as video hardware acceleration is available.
Soooo... Neighbor donated hard drive I'd replaced, it's on its last leg maybe, a Toshiba 2.5" with a USB 3.0 adapter cap on it. I formatted that Ext3, installed Ext2IFS_1_12 which allows me to copy files from Windows to Ext2 and 3. I'll have this hopefully mounted in the setup within an hour. See if it reads over LAN. Doubt it, but you never know...
=========
-= Cloud 9 =-
Edited 1 time(s). Last edit at 03/20/2017 07:21PM by JoeyPogoPlugE02.
-------------------------------------------------------
> It's a good idea! Live USB is good enough, but you
> 're not runing the same system I'm running (Mint 1
> 8.x Cinamon) so it is a little hard for you to rec
> ognize right away what I posted (I assumed you did
Yeah, anything Mint on live USB here is 18.1, favorite being XFCE (not nearby ATM though) as long as video hardware acceleration is available.
Soooo... Neighbor donated hard drive I'd replaced, it's on its last leg maybe, a Toshiba 2.5" with a USB 3.0 adapter cap on it. I formatted that Ext3, installed Ext2IFS_1_12 which allows me to copy files from Windows to Ext2 and 3. I'll have this hopefully mounted in the setup within an hour. See if it reads over LAN. Doubt it, but you never know...
=========
-= Cloud 9 =-
Edited 1 time(s). Last edit at 03/20/2017 07:21PM by JoeyPogoPlugE02.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 20, 2017 07:45PM |
Registered: 9 years ago Posts: 1,516 |
fdisk -l dmesg lsusb lsusb -vvv
Not sure what to make if it...
root@DebianPlug:~# fdisk -l
Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaaaaaaaa
Device Boot Start End Sectors Size Id Type
/dev/mtdblock0p1 ? 2863311530 5726623059 2863311530 1.3T aa unknown
/dev/mtdblock0p2 ? 2863311530 5726623059 2863311530 1.3T aa unknown
/dev/mtdblock0p3 ? 2863311530 4294989139 1431677610 682.7G aa unknown
/dev/mtdblock0p4 ? 2863311530 5721052499 2857740970 1.3T aa unknown
Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 7.3 GiB, 7849115648 bytes, 15330304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01ecce21
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 15147007 15144960 7.2G 83 Linux
Disk /dev/zram0: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
root@DebianPlug:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.48-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Wed Feb 15 02:59:11 PST 2017
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Pogoplug V3 Pro
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c08a6980, node_mem_map c7ef9000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[ 0.000000] pcpu-alloc: s17696 r8192 d23264 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 117048K/131072K available (6406K kernel code, 288K rwdata, 1908K rodata, 228K init, 247K bss, 14024K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0826ddc (8316 kB)
.init : 0xc0827000 - 0xc0860000 ( 228 kB)
.data : 0xc0860000 - 0xc08a8338 ( 289 kB)
.bss : 0xc08a8338 - 0xc08e6310 ( 248 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:160
[ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.000161] Console: colour dummy device 80x30
[ 0.000192] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[ 0.050017] pid_max: default: 32768 minimum: 301
[ 0.050183] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.051013] Initializing cgroup subsys net_cls
[ 0.051092] CPU: Testing write buffer coherency: ok
[ 0.051517] Setting up static identity map for 0x60008220 - 0x60008258
[ 0.190131] Brought up 2 CPUs
[ 0.190154] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[ 0.190932] devtmpfs: initialized
[ 0.195678] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.195942] prandom: seed boundary self test passed
[ 0.200358] prandom: 100 self tests passed
[ 0.200386] pinctrl core: initialized pinctrl subsystem
[ 0.201274] NET: Registered protocol family 16
[ 0.201812] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.230018] cpuidle: using governor ladder
[ 0.260016] cpuidle: using governor menu
[ 0.265067] gpio-oxnas 44000000.gpio: at address c8848000
[ 0.265456] gpio-oxnas 44100000.gpio: at address c884a000
[ 0.266017] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[ 0.388495] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[ 0.388613] oxnas-pcie 47c00000.pcie-controller: link up
[ 0.388928] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[ 0.388953] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[ 0.388971] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[ 0.388986] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
[ 0.389004] pci_bus 0000:00: root bus resource [bus 00-7f]
[ 0.389068] pci 0000:00:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.389158] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 0.389340] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.389703] PCI: bus0: Fast back to back transfers disabled
[ 0.389798] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48001fff 64bit]
[ 0.390338] vgaarb: loaded
[ 0.390835] SCSI subsystem initialized
[ 0.391188] libata version 3.00 loaded.
[ 0.391715] usbcore: registered new interface driver usbfs
[ 0.391823] usbcore: registered new interface driver hub
[ 0.391984] usbcore: registered new device driver usb
[ 0.392194] pps_core: LinuxPPS API ver. 1 registered
[ 0.392209] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.392256] PTP clock support registered
[ 0.394393] clocksource: Switched to clocksource rps_clocksource_timer
[ 0.413153] NET: Registered protocol family 2
[ 0.414028] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.414072] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.414105] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.414202] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.414243] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.414504] NET: Registered protocol family 1
[ 0.415045] RPC: Registered named UNIX socket transport module.
[ 0.415065] RPC: Registered udp transport module.
[ 0.415075] RPC: Registered tcp transport module.
[ 0.415086] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.415150] pci 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.415219] PCI: CLS 32 bytes, default 32
[ 0.415546] Unpacking initramfs...
[ 0.805212] Freeing initrd memory: 3644K (c7a99000 - c7e28000)
[ 0.806615] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.806778] Initialise system trusted keyring
[ 0.832522] zbud: loaded
[ 0.851422] NFS: Registering the id_resolver key type
[ 0.851494] Key type id_resolver registered
[ 0.851507] Key type id_legacy registered
[ 0.851550] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.851573] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.852500] fuse init (API version 7.23)
[ 0.854551] Key type big_key registered
[ 0.933209] Key type asymmetric registered
[ 0.933245] Asymmetric key parser 'x509' registered
[ 0.933373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.933399] io scheduler noop registered
[ 0.933416] io scheduler deadline registered
[ 0.933475] io scheduler cfq registered (default)
[ 0.934110] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.935682] console [ttyS0] disabled
[ 0.935779] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[ 1.521021] console [ttyS0] enabled
[ 1.535749] loop: module loaded
[ 1.787722] scsi host0: sata_oxnas
[ 1.840980] ata1: SATA max UDMA/133 irq 7
[ 1.845068] sata_oxnas: resetting SATA core
[ 1.846103] nand: Could not find valid ONFI parameter page; aborting
[ 1.846146] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 1.846151] nand: Hynix NAND 128MiB 3,3V 8-bit
[ 1.846159] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.846177] Scanning device for bad blocks
[ 1.929505] 2 ofpart partitions found on MTD device 41000000.nand
[ 1.935587] Creating 2 MTD partitions on "41000000.nand":
[ 1.940999] 0x000000000000-0x000000e00000 : "boot"
[ 1.947655] 0x000000e00000-0x000008000000 : "data"
[ 1.954967] oxnas-gmac 40400000.ethernet: no reset control found
[ 1.960988] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 1.966013] Ring mode enabled
[ 1.969047] DMA HW capability register supported
[ 1.973568] Enhanced/Alternate descriptors
[ 1.977899] Enabled extended descriptors
[ 1.981898] RX Checksum Offload Engine supported (type 2)
[ 1.987353] TX Checksum insertion supported
[ 1.991626] Wake-Up On Lan supported
[ 1.995269] Enable RX Mitigation via HW Watchdog Timer
[ 2.016762] libphy: stmmac: probed
[ 2.020211] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[ 2.026624] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[ 2.033285] PPP generic driver version 2.4.2
[ 2.038123] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.044689] ehci-pci: EHCI PCI platform driver
[ 2.049502] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 2.055065] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 2.062906] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[ 2.080148] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 2.086474] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.093268] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.100477] usb usb1: Product: EHCI Host Controller
[ 2.105328] usb usb1: Manufacturer: Linux 4.4.48-oxnas-tld-1 ehci_hcd
[ 2.111754] usb usb1: SerialNumber: 40200100.ehci
[ 2.117391] hub 1-0:1.0: USB hub found
[ 2.121251] hub 1-0:1.0: 2 ports detected
[ 2.126254] xhci_hcd 0000:00:00.0: xHCI Host Controller
[ 2.131558] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 2
[ 2.144458] xhci_hcd 0000:00:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[ 2.153341] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.160151] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.167339] usb usb2: Product: xHCI Host Controller
[ 2.172213] usb usb2: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[ 2.178621] usb usb2: SerialNumber: 0000:00:00.0
[ 2.184220] hub 2-0:1.0: USB hub found
[ 2.188032] hub 2-0:1.0: 2 ports detected
[ 2.192931] xhci_hcd 0000:00:00.0: xHCI Host Controller
[ 2.198154] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 3
[ 2.205736] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.214123] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.221107] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.228300] usb usb3: Product: xHCI Host Controller
[ 2.230010] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.238558] usb usb3: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[ 2.244989] usb usb3: SerialNumber: 0000:00:00.0
[ 2.250649] hub 3-0:1.0: USB hub found
[ 2.254461] hub 3-0:1.0: 2 ports detected
[ 2.259591] usbcore: registered new interface driver cdc_acm
[ 2.265264] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.273382] usbcore: registered new interface driver cdc_wdm
[ 2.279229] usbcore: registered new interface driver usb-storage
[ 2.285424] usbcore: registered new interface driver usbserial
[ 2.291624] usbcore: registered new interface driver usbserial_generic
[ 2.298188] usbserial: USB Serial support registered for generic
[ 2.304629] mousedev: PS/2 mouse device common for all mice
[ 2.310430] i2c /dev entries driver
[ 2.315171] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.321072] usbcore: registered new interface driver usbhid
[ 2.326622] usbhid: USB HID core driver
[ 2.332564] NET: Registered protocol family 10
[ 2.338529] sit: IPv6 over IPv4 tunneling driver
[ 2.344156] NET: Registered protocol family 17
[ 2.348746] Key type dns_resolver registered
[ 2.354534] registered taskstats version 1
[ 2.358650] Loading compiled-in X.509 certificates
[ 2.363586] zswap: loaded using pool lzo/zbud
[ 2.383851] Key type encrypted registered
[ 2.391272] Freeing unused kernel memory: 228K (c0827000 - c0860000)
[ 2.440276] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[ 2.531253] udevd[99]: starting version 175
[ 2.592404] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.599091] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.636835] usb 1-1: Product: USB2.0 Hub
[ 2.651834] hub 1-1:1.0: USB hub found
[ 2.671029] hub 1-1:1.0: 4 ports detected
[ 2.970327] usb 1-1.1: new high-speed USB device number 3 using oxnas-ehci
[ 3.091310] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5575
[ 3.098165] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.105533] usb 1-1.1: Product: Cruzer Glide
[ 3.109788] usb 1-1.1: Manufacturer: SanDisk
[ 3.114058] usb 1-1.1: SerialNumber: 4C530201370809103182
[ 3.120829] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 3.127608] scsi host1: usb-storage 1-1.1:1.0
[ 3.155630] usbcore: registered new interface driver uas
[ 4.131430] scsi 1:0:0:0: Direct-Access SanDisk Cruzer Glide 1.27 PQ: 0 ANSI: 6
[ 4.146012] sd 1:0:0:0: [sda] 15330304 512-byte logical blocks: (7.85 GB/7.31 GiB)
[ 4.156185] sd 1:0:0:0: [sda] Write Protect is off
[ 4.161254] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 4.162426] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.184279] sda: sda1
[ 4.198551] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 13.476666] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 13.506227] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.998901] udevd[298]: starting version 175
[ 17.193909] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 17.305932] random: nonblocking pool is initialized
[ 17.477793] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 20.642938] Adding 1048572k swap on /swapfile1. Priority:-1 extents:360 across:1169636k FS
[ 22.831485] zram: Added device: zram0
[ 22.851507] zram: Added device: zram1
[ 22.871518] zram: Added device: zram2
[ 22.891402] zram: Added device: zram3
[ 22.910873] zram0: detected capacity change from 0 to 23220224
[ 22.962598] Adding 22672k swap on /dev/zram0. Priority:10 extents:1 across:22672k SSFS
[ 22.975470] zram1: detected capacity change from 0 to 23220224
[ 23.022085] Adding 22672k swap on /dev/zram1. Priority:10 extents:1 across:22672k SSFS
[ 23.032514] zram2: detected capacity change from 0 to 23220224
[ 23.097671] Adding 22672k swap on /dev/zram2. Priority:10 extents:1 across:22672k SSFS
[ 23.112284] zram3: detected capacity change from 0 to 23220224
[ 23.164687] Adding 22672k swap on /dev/zram3. Priority:10 extents:1 across:22672k SSFS
[ 28.710179] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 31.710128] oxnas-gmac 40400000.ethernet eth0: Link is Down
[ 32.710169] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 35.710149] oxnas-gmac 40400000.ethernet eth0: Link is Down
[ 36.710177] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 60.148200] zram: Cannot change disksize for initialized device
[ 60.202370] zram: Cannot change disksize for initialized device
[ 60.274823] zram: Cannot change disksize for initialized device
[ 60.347307] zram: Cannot change disksize for initialized device
[ 138.560696] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 138.585492] usb 3-2: New USB device found, idVendor=1f75, idProduct=0621
[ 138.592348] usb 3-2: New USB device strings: Mfr=4, Product=5, SerialNumber=6
[ 138.599552] usb 3-2: Product: FX-D0002.HDD
[ 138.603729] usb 3-2: Manufacturer: ULT-Best
[ 138.608151] usb 3-2: SerialNumber: 20150718
[ 138.833131] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 138.840576] scsi host2: usb-storage 3-2:1.0
[ 148.265999] scsi 2:0:0:0: Direct-Access ULT-Best FX-D0002.HDD PQ: 0 ANSI: 6
[ 148.286041] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 166.160335] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 171.380300] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 171.590067] usb 3-2: device not accepting address 2, error -62
[ 176.810234] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 182.032611] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 182.250086] usb 3-2: device not accepting address 2, error -62
[ 187.470310] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 192.700405] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 192.910192] usb 3-2: device not accepting address 2, error -62
[ 198.130352] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 203.350359] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 203.560192] usb 3-2: device not accepting address 2, error -62
[ 203.620436] usb 3-2: USB disconnect, device number 2
[ 208.840276] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 214.060446] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 214.270097] usb 3-2: device not accepting address 3, error -62
[ 219.490496] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 224.710402] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 224.920181] usb 3-2: device not accepting address 4, error -62
[ 230.140218] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 235.360273] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 235.570060] usb 3-2: device not accepting address 5, error -62
[ 240.790284] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 246.010324] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[ 246.220134] usb 3-2: device not accepting address 6, error -62
[ 246.250160] usb usb3-port2: unable to enumerate USB device
root@DebianPlug:~# lsusb
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@DebianPlug:~# lsusb -vvv
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 4.04
iManufacturer 3 Linux 4.4.48-oxnas-tld-1 xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:00.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Hub Descriptor:
bLength 12
bDescriptorType 42
nNbrPorts 2
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
bHubDecLat 0.0 micro seconds
wHubDelay 0 nano seconds
DeviceRemovable 0x00
Hub Port Status:
Port 1: 0000.02a0 5Gbps power Rx.Detect
Port 2: 0000.0263 5Gbps power suspend enable connect
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 15
bNumDeviceCaps 1
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x02
Latency Tolerance Messages (LTM) Supported
wSpeedsSupported 0x0008
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 3
Lowest fully-functional device speed is SuperSpeed (5Gbps)
bU1DevExitLat 0 micro seconds
bU2DevExitLat 0 micro seconds
Device Status: 0x0001
Self Powered
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.04
iManufacturer 3 Linux 4.4.48-oxnas-tld-1 xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:00.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0781 SanDisk Corp.
idProduct 0x5575
bcdDevice 1.27
iManufacturer 1 SanDisk
iProduct 2 Cruzer Glide
iSerial 3 4C530201370809103182
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0608 USB-2.0 4-Port HUB
bcdDevice 77.64
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e0
Ganged power switching
Ganged overcurrent protection
TT think time 32 FS bits
Port indicators
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.04
iManufacturer 3 Linux 4.4.48-oxnas-tld-1 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 40200100.ehci
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
root@DebianPlug:~#
I dunno bodhi, it might be time to put the Pogo 3 back together and find some other way to serve external hard drives over Gigabit LAN. And donate my Pogo3s to some prisoner who could use a project for the next 20-to-life 8-)
=========
-= Cloud 9 =-
Edited 2 time(s). Last edit at 03/20/2017 09:04PM by JoeyPogoPlugE02.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 21, 2017 12:05AM |
Registered: 9 years ago Posts: 1,516 |
Hey bodhi, there's something I previously missed: the item we bought, here, do you see a link that says Document? This downloads a 57.4 MB rar file with drivers inside for this and other devices. The NEC folder looks familiar and has .ini files that may offer clues to the problems being had. Not sure if it'll help but I'll keep it both for Windows possibilities later on and the (admittedly doubtful) possibility it can help with Linux somehow.
(Wow,) is this the actual Linux driver? http://lxr.linux.no/linux+v2.6.31.14/drivers/usb/host/xhci-hcd.c
=========
-= Cloud 9 =-
Edited 1 time(s). Last edit at 03/21/2017 12:22AM by JoeyPogoPlugE02.
(Wow,) is this the actual Linux driver? http://lxr.linux.no/linux+v2.6.31.14/drivers/usb/host/xhci-hcd.c
=========
-= Cloud 9 =-
Edited 1 time(s). Last edit at 03/21/2017 12:22AM by JoeyPogoPlugE02.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 21, 2017 12:47AM |
Admin Registered: 13 years ago Posts: 18,542 |
Well, this is worse than before :)
There is no sdb in this output. So does not matter what happen after this.
If you need to use the Pogo V3 then, yes, put it back together.
If I can find the time to try this again (need to dig out 2nd my USB molex cable or my USB 3.0 power hub) then I'll let you know. I'm not ready to declare that it's junk or anything like that yet :)
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 2 time(s). Last edit at 03/21/2017 12:50AM by bodhi.
root@DebianPlug:~# fdisk -l Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xaaaaaaaa Device Boot Start End Sectors Size Id Type /dev/mtdblock0p1 ? 2863311530 5726623059 2863311530 1.3T aa unknown /dev/mtdblock0p2 ? 2863311530 5726623059 2863311530 1.3T aa unknown /dev/mtdblock0p3 ? 2863311530 4294989139 1431677610 682.7G aa unknown /dev/mtdblock0p4 ? 2863311530 5721052499 2857740970 1.3T aa unknown Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/sda: 7.3 GiB, 7849115648 bytes, 15330304 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x01ecce21 Device Boot Start End Sectors Size Id Type /dev/sda1 2048 15147007 15144960 7.2G 83 Linux Disk /dev/zram0: 22.1 MiB, 23220224 bytes, 5669 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram1: 22.1 MiB, 23220224 bytes, 5669 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram2: 22.1 MiB, 23220224 bytes, 5669 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram3: 22.1 MiB, 23220224 bytes, 5669 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes
There is no sdb in this output. So does not matter what happen after this.
If you need to use the Pogo V3 then, yes, put it back together.
If I can find the time to try this again (need to dig out 2nd my USB molex cable or my USB 3.0 power hub) then I'll let you know. I'm not ready to declare that it's junk or anything like that yet :)
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 2 time(s). Last edit at 03/21/2017 12:50AM by bodhi.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 21, 2017 08:49AM |
Registered: 9 years ago Posts: 1,516 |
bodhi Wrote:
-------------------------------------------------------
...
> hub) then I'll let you know. I'm not ready to decl
> are that it's junk or anything like that yet :)
As the Pogoplug isn't being used for anything (future torrents if anything), I might have gotten my second wind.
Just thinking out loud, not so much a ToDo list:
1. The half-height ribbon you ordered (I think you did) might hold a clue if the screws ground certain places together. Maybe it's a crackpot theory but it sure seems worth investigating.
2. I haven't tried (or don't remember trying) a USB 2 stick in that unit. Possible the 3.0 part is whacked and 2.0 is somehow fine.
3. I might have a USB 2 cap for that hard drive. Can't remember, have to look.
I'll take care of some stressers today and come back to this with some kind of Zen mind tonight :-)
=========
-= Cloud 9 =-
Edited 1 time(s). Last edit at 03/21/2017 12:28PM by JoeyPogoPlugE02.
-------------------------------------------------------
...
> hub) then I'll let you know. I'm not ready to decl
> are that it's junk or anything like that yet :)
As the Pogoplug isn't being used for anything (future torrents if anything), I might have gotten my second wind.
Just thinking out loud, not so much a ToDo list:
1. The half-height ribbon you ordered (I think you did) might hold a clue if the screws ground certain places together. Maybe it's a crackpot theory but it sure seems worth investigating.
2. I haven't tried (or don't remember trying) a USB 2 stick in that unit. Possible the 3.0 part is whacked and 2.0 is somehow fine.
3. I might have a USB 2 cap for that hard drive. Can't remember, have to look.
I'll take care of some stressers today and come back to this with some kind of Zen mind tonight :-)
=========
-= Cloud 9 =-
Edited 1 time(s). Last edit at 03/21/2017 12:28PM by JoeyPogoPlugE02.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 21, 2017 02:50PM |
Registered: 9 years ago Posts: 1,516 |
New one using Seagate ADAPTER that goes between 2.5" hard drive and USB 3.0 plug:
Note: I hit fdisk -l again after seeing a mention of spinning up.
I'll come back later.
=========
-= Cloud 9 =-
Edited 2 time(s). Last edit at 03/21/2017 03:24PM by JoeyPogoPlugE02.
Note: I hit fdisk -l again after seeing a mention of spinning up.
root@DebianPlug:~# fdisk -l
Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaaaaaaaa
Device Boot Start End Sectors Size Id Type
/dev/mtdblock0p1 ? 2863311530 5726623059 2863311530 1.3T aa unknown
/dev/mtdblock0p2 ? 2863311530 5726623059 2863311530 1.3T aa unknown
/dev/mtdblock0p3 ? 2863311530 4294989139 1431677610 682.7G aa unknown
/dev/mtdblock0p4 ? 2863311530 5721052499 2857740970 1.3T aa unknown
Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 7.3 GiB, 7849115648 bytes, 15330304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01ecce21
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 15147007 15144960 7.2G 83 Linux
Disk /dev/zram0: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
root@DebianPlug:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.48-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Wed Feb 15 02:59:11 PST 2017
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Pogoplug V3 Pro
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c08a6980, node_mem_map c7ef9000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[ 0.000000] pcpu-alloc: s17696 r8192 d23264 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 117048K/131072K available (6406K kernel code, 288K rwdata, 1908K rodata, 228K init, 247K bss, 14024K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0826ddc (8316 kB)
.init : 0xc0827000 - 0xc0860000 ( 228 kB)
.data : 0xc0860000 - 0xc08a8338 ( 289 kB)
.bss : 0xc08a8338 - 0xc08e6310 ( 248 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:160
[ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.000161] Console: colour dummy device 80x30
[ 0.000192] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[ 0.050022] pid_max: default: 32768 minimum: 301
[ 0.050183] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.051005] Initializing cgroup subsys net_cls
[ 0.051087] CPU: Testing write buffer coherency: ok
[ 0.051512] Setting up static identity map for 0x60008220 - 0x60008258
[ 0.190131] Brought up 2 CPUs
[ 0.190154] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[ 0.190935] devtmpfs: initialized
[ 0.195735] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.195996] prandom: seed boundary self test passed
[ 0.200412] prandom: 100 self tests passed
[ 0.200437] pinctrl core: initialized pinctrl subsystem
[ 0.201269] NET: Registered protocol family 16
[ 0.201807] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.230021] cpuidle: using governor ladder
[ 0.260014] cpuidle: using governor menu
[ 0.265075] gpio-oxnas 44000000.gpio: at address c8848000
[ 0.265459] gpio-oxnas 44100000.gpio: at address c884a000
[ 0.266022] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[ 0.389025] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[ 0.389145] oxnas-pcie 47c00000.pcie-controller: link up
[ 0.389463] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[ 0.389486] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[ 0.389504] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[ 0.389519] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
[ 0.389537] pci_bus 0000:00: root bus resource [bus 00-7f]
[ 0.389601] pci 0000:00:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.389688] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 0.389870] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.390295] PCI: bus0: Fast back to back transfers disabled
[ 0.390389] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48001fff 64bit]
[ 0.390868] vgaarb: loaded
[ 0.391357] SCSI subsystem initialized
[ 0.391720] libata version 3.00 loaded.
[ 0.392238] usbcore: registered new interface driver usbfs
[ 0.392348] usbcore: registered new interface driver hub
[ 0.392509] usbcore: registered new device driver usb
[ 0.392721] pps_core: LinuxPPS API ver. 1 registered
[ 0.392737] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.392785] PTP clock support registered
[ 0.394905] clocksource: Switched to clocksource rps_clocksource_timer
[ 0.413672] NET: Registered protocol family 2
[ 0.414548] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.414592] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.414625] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.414725] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.414768] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.415032] NET: Registered protocol family 1
[ 0.415582] RPC: Registered named UNIX socket transport module.
[ 0.415603] RPC: Registered udp transport module.
[ 0.415613] RPC: Registered tcp transport module.
[ 0.415626] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.415687] pci 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.415761] PCI: CLS 32 bytes, default 32
[ 0.416102] Unpacking initramfs...
[ 0.805532] Freeing initrd memory: 3644K (c7a99000 - c7e28000)
[ 0.806968] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.807134] Initialise system trusted keyring
[ 0.819980] zbud: loaded
[ 0.841364] NFS: Registering the id_resolver key type
[ 0.841433] Key type id_resolver registered
[ 0.841448] Key type id_legacy registered
[ 0.841492] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.841515] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.842419] fuse init (API version 7.23)
[ 0.844426] Key type big_key registered
[ 0.921912] Key type asymmetric registered
[ 0.921940] Asymmetric key parser 'x509' registered
[ 0.922068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.922096] io scheduler noop registered
[ 0.922114] io scheduler deadline registered
[ 0.922178] io scheduler cfq registered (default)
[ 0.922823] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.924395] console [ttyS0] disabled
[ 0.924490] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[ 1.509985] console [ttyS0] enabled
[ 1.632509] loop: module loaded
[ 1.884462] scsi host0: sata_oxnas
[ 1.937687] ata1: SATA max UDMA/133 irq 7
[ 1.941788] sata_oxnas: resetting SATA core
[ 1.942812] nand: Could not find valid ONFI parameter page; aborting
[ 1.942853] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 1.942858] nand: Hynix NAND 128MiB 3,3V 8-bit
[ 1.942868] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.942886] Scanning device for bad blocks
[ 2.025507] 2 ofpart partitions found on MTD device 41000000.nand
[ 2.031598] Creating 2 MTD partitions on "41000000.nand":
[ 2.036994] 0x000000000000-0x000000e00000 : "boot"
[ 2.043694] 0x000000e00000-0x000008000000 : "data"
[ 2.050931] oxnas-gmac 40400000.ethernet: no reset control found
[ 2.056921] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 2.061975] Ring mode enabled
[ 2.065013] DMA HW capability register supported
[ 2.069514] Enhanced/Alternate descriptors
[ 2.073861] Enabled extended descriptors
[ 2.077849] RX Checksum Offload Engine supported (type 2)
[ 2.083315] TX Checksum insertion supported
[ 2.087559] Wake-Up On Lan supported
[ 2.091212] Enable RX Mitigation via HW Watchdog Timer
[ 2.112212] libphy: stmmac: probed
[ 2.115609] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[ 2.122073] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[ 2.128734] PPP generic driver version 2.4.2
[ 2.133616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.140180] ehci-pci: EHCI PCI platform driver
[ 2.144988] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 2.150568] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 2.158359] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[ 2.180147] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 2.186460] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.193256] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.200463] usb usb1: Product: EHCI Host Controller
[ 2.205319] usb usb1: Manufacturer: Linux 4.4.48-oxnas-tld-1 ehci_hcd
[ 2.211742] usb usb1: SerialNumber: 40200100.ehci
[ 2.217359] hub 1-0:1.0: USB hub found
[ 2.221224] hub 1-0:1.0: 2 ports detected
[ 2.226240] xhci_hcd 0000:00:00.0: xHCI Host Controller
[ 2.231534] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 2
[ 2.244426] xhci_hcd 0000:00:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[ 2.253291] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.260052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.267281] usb usb2: Product: xHCI Host Controller
[ 2.272163] usb usb2: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[ 2.278574] usb usb2: SerialNumber: 0000:00:00.0
[ 2.284172] hub 2-0:1.0: USB hub found
[ 2.287989] hub 2-0:1.0: 2 ports detected
[ 2.292920] xhci_hcd 0000:00:00.0: xHCI Host Controller
[ 2.298142] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 3
[ 2.305722] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.314088] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.321075] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.328268] usb usb3: Product: xHCI Host Controller
[ 2.330009] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.338529] usb usb3: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[ 2.344960] usb usb3: SerialNumber: 0000:00:00.0
[ 2.350609] hub 3-0:1.0: USB hub found
[ 2.354419] hub 3-0:1.0: 2 ports detected
[ 2.359541] usbcore: registered new interface driver cdc_acm
[ 2.365217] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.373332] usbcore: registered new interface driver cdc_wdm
[ 2.379179] usbcore: registered new interface driver usb-storage
[ 2.385374] usbcore: registered new interface driver usbserial
[ 2.391580] usbcore: registered new interface driver usbserial_generic
[ 2.398141] usbserial: USB Serial support registered for generic
[ 2.404572] mousedev: PS/2 mouse device common for all mice
[ 2.410370] i2c /dev entries driver
[ 2.415162] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.421035] usbcore: registered new interface driver usbhid
[ 2.426585] usbhid: USB HID core driver
[ 2.432465] NET: Registered protocol family 10
[ 2.438423] sit: IPv6 over IPv4 tunneling driver
[ 2.444042] NET: Registered protocol family 17
[ 2.448650] Key type dns_resolver registered
[ 2.454438] registered taskstats version 1
[ 2.458554] Loading compiled-in X.509 certificates
[ 2.463488] zswap: loaded using pool lzo/zbud
[ 2.483911] Key type encrypted registered
[ 2.503004] Freeing unused kernel memory: 228K (c0827000 - c0860000)
[ 2.540208] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[ 2.645972] udevd[99]: starting version 175
[ 2.702973] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.709657] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.736857] usb 1-1: Product: USB2.0 Hub
[ 2.752665] hub 1-1:1.0: USB hub found
[ 2.772305] hub 1-1:1.0: 4 ports detected
[ 3.070853] usb 1-1.1: new high-speed USB device number 3 using oxnas-ehci
[ 3.191262] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5575
[ 3.198118] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.205445] usb 1-1.1: Product: Cruzer Glide
[ 3.209697] usb 1-1.1: Manufacturer: SanDisk
[ 3.213980] usb 1-1.1: SerialNumber: 4C530201370809103182
[ 3.221271] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 3.228014] scsi host1: usb-storage 1-1.1:1.0
[ 3.256099] usbcore: registered new interface driver uas
[ 4.231367] scsi 1:0:0:0: Direct-Access SanDisk Cruzer Glide 1.27 PQ: 0 ANSI: 6
[ 4.245685] sd 1:0:0:0: [sda] 15330304 512-byte logical blocks: (7.85 GB/7.31 GiB)
[ 4.255431] sd 1:0:0:0: [sda] Write Protect is off
[ 4.260395] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 4.261591] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.282370] sda: sda1
[ 4.293619] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 16.811156] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 16.837245] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 18.316272] udevd[301]: starting version 175
[ 18.833190] random: nonblocking pool is initialized
[ 20.205941] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 20.498483] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 23.641456] Adding 1048572k swap on /swapfile1. Priority:-1 extents:360 across:1169636k FS
[ 26.462492] zram: Added device: zram0
[ 26.482304] zram: Added device: zram1
[ 26.502236] zram: Added device: zram2
[ 26.522250] zram: Added device: zram3
[ 26.556817] zram0: detected capacity change from 0 to 23220224
[ 26.652879] Adding 22672k swap on /dev/zram0. Priority:10 extents:1 across:22672k SSFS
[ 26.671644] zram1: detected capacity change from 0 to 23220224
[ 26.742402] Adding 22672k swap on /dev/zram1. Priority:10 extents:1 across:22672k SSFS
[ 26.752542] zram2: detected capacity change from 0 to 23220224
[ 26.811645] Adding 22672k swap on /dev/zram2. Priority:10 extents:1 across:22672k SSFS
[ 26.826278] zram3: detected capacity change from 0 to 23220224
[ 26.891955] Adding 22672k swap on /dev/zram3. Priority:10 extents:1 across:22672k SSFS
[ 32.190164] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 55.713454] zram: Cannot change disksize for initialized device
[ 55.787197] zram: Cannot change disksize for initialized device
[ 55.889592] zram: Cannot change disksize for initialized device
[ 56.030026] zram: Cannot change disksize for initialized device
[ 166.086699] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 166.126732] usb 3-2: New USB device found, idVendor=0bc2, idProduct=ab00
[ 166.135700] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 166.152250] usb 3-2: Product: Slim
[ 166.160220] usb 3-2: Manufacturer: Seagate
[ 166.164354] usb 3-2: SerialNumber: 52AB4031F0QZ
[ 166.450332] scsi host2: uas
[ 166.470819] scsi 2:0:0:0: Direct-Access Seagate Slim 6408 PQ: 0 ANSI: 6
[ 166.481436] sd 2:0:0:0: [sdb] Spinning up disk...
root@DebianPlug:~# fdisk -l
Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaaaaaaaa
Device Boot Start End Sectors Size Id Type
/dev/mtdblock0p1 ? 2863311530 5726623059 2863311530 1.3T aa unknown
/dev/mtdblock0p2 ? 2863311530 5726623059 2863311530 1.3T aa unknown
/dev/mtdblock0p3 ? 2863311530 4294989139 1431677610 682.7G aa unknown
/dev/mtdblock0p4 ? 2863311530 5721052499 2857740970 1.3T aa unknown
Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 7.3 GiB, 7849115648 bytes, 15330304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01ecce21
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 15147007 15144960 7.2G 83 Linux
Disk /dev/zram0: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
root@DebianPlug:~# lsusb
Bus 003 Device 002: ID 0bc2:ab00 Seagate RSS LLC
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@DebianPlug:~# lsusb -vvv
Bus 003 Device 002: ID 0bc2:ab00 Seagate RSS LLC
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x0bc2 Seagate RSS LLC
idProduct 0xab00
bcdDevice 1.00
iManufacturer 2 Seagate
iProduct 3 Slim
iSerial 1 52AB4031F0QZ
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 121
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 36mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-out pipe (0x04)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Command pipe (0x01)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Device Status: 0x0000
(Bus Powered)
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 4.04
iManufacturer 3 Linux 4.4.48-oxnas-tld-1 xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:00.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Hub Descriptor:
bLength 12
bDescriptorType 42
nNbrPorts 2
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
bHubDecLat 0.0 micro seconds
wHubDelay 0 nano seconds
DeviceRemovable 0x00
Hub Port Status:
Port 1: 0000.02a0 5Gbps power Rx.Detect
Port 2: 0000.0203 5Gbps power U0 enable connect
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 15
bNumDeviceCaps 1
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x02
Latency Tolerance Messages (LTM) Supported
wSpeedsSupported 0x0008
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 3
Lowest fully-functional device speed is SuperSpeed (5Gbps)
bU1DevExitLat 0 micro seconds
bU2DevExitLat 0 micro seconds
Device Status: 0x0001
Self Powered
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.04
iManufacturer 3 Linux 4.4.48-oxnas-tld-1 xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:00.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0781 SanDisk Corp.
idProduct 0x5575
bcdDevice 1.27
iManufacturer 1 SanDisk
iProduct 2 Cruzer Glide
iSerial 3 4C530201370809103182
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0608 USB-2.0 4-Port HUB
bcdDevice 77.64
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e0
Ganged power switching
Ganged overcurrent protection
TT think time 32 FS bits
Port indicators
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.04
iManufacturer 3 Linux 4.4.48-oxnas-tld-1 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 40200100.ehci
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
root@DebianPlug:~#
I'll come back later.
=========
-= Cloud 9 =-
Edited 2 time(s). Last edit at 03/21/2017 03:24PM by JoeyPogoPlugE02.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 21, 2017 10:44PM |
Registered: 7 years ago Posts: 49 |
Hey Bodhi and Joey,
Does this device use the Renesas uPD720202 chipset? It says "based on". Isn't the driver available in kernel for this for x86? Is there an ARM specific version or do you have to recompile it from source? Have you guys ID'd the new hardware in dmesg yet?
Joey, without reading all the details so far on everything, have you ran or tried running # lsblk and # lspci?
I'm sure Bodhi is getting all the info he needs so far, but I'm just kind of curious.
I see a Seagate drive is showing up in lsusb, but not showing in fdisk. Is this a good, Linux file system formatted hdd and is it USB 2 or 3?
I needed to install:
Here's the results on a v3 currently running off USB.
--------------------------------------------------------------
Blog: www.jeffstory.org
Does this device use the Renesas uPD720202 chipset? It says "based on". Isn't the driver available in kernel for this for x86? Is there an ARM specific version or do you have to recompile it from source? Have you guys ID'd the new hardware in dmesg yet?
Joey, without reading all the details so far on everything, have you ran or tried running # lsblk and # lspci?
I'm sure Bodhi is getting all the info he needs so far, but I'm just kind of curious.
I see a Seagate drive is showing up in lsusb, but not showing in fdisk. Is this a good, Linux file system formatted hdd and is it USB 2 or 3?
I needed to install:
# apt-get install pciutilsTo run:
# lspci
Here's the results on a v3 currently running off USB.
[root@PogoV3Debian jeff]# lsblk -afm NAME FSTYPE LABEL MOUNTPOINT NAME SIZE OWNER GROUP MODE sda sda 14.4G root floppy brw-rw---T `-sda1 ext3 rootfs / `-sda1 14.4G root floppy brw-rw---T loop0 loop0 root disk brw-rw---T loop1 loop1 root disk brw-rw---T loop2 loop2 root disk brw-rw---T loop3 loop3 root disk brw-rw---T loop4 loop4 root disk brw-rw---T loop5 loop5 root disk brw-rw---T loop6 loop6 root disk brw-rw---T loop7 loop7 root disk brw-rw---T mtdblock0 mtdblock0 14M root disk brw-rw---T mtdblock1 mtdblock1 114M root disk brw-rw---T
[root@PogoV3Debian jeff]# lspci 00:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
--------------------------------------------------------------
Blog: www.jeffstory.org
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 12:25AM |
Registered: 9 years ago Posts: 1,516 |
JeffS Wrote:
-------------------------------------------------------
Jeff thanks for stopping by. Ever since Adorama's Pogoplug blowout/rebate sale two years ago, I've wondered if the mpcie slot could be useful on the Pro model, since the stock wireless didn't work once Debian was installed. So my intention is the experiment to see how fast this gets USB 3 stuff over Gigabit LAN, and if it works, to have a speedy distribution point for when family drops by and they want the family media collection. Sickeningly mundane, but then again "what if" it's faster than I imagine? We'd all be $12-25 away from a frightfully useful home server for files mainly. * Honestly I don't know my ass from a hole in the ground, but am the amateur visionary once a year LOL
So to answer where I can, here goes:
> Does this device use the Renesas uPD720202 chipset
I see it listed, so I'm going with yes.
> ? It says "based on". Isn't the driver available i
> n kernel for this for x86? Is there an ARM specifi
> c version or do you have to recompile it from sour
> ce?
BODHI!
> Have you guys ID'd the new hardware in dmesg yet?
I ran it and added it at the bottom/
> Joey, without reading all the details so far on everything, have you ran or tried running # lsblk and # lspci?
Got that for you below.
> I see a Seagate drive is showing up in lsusb, but
> not showing in fdisk. Is this a good, Linux file s
> ystem formatted hdd and is it USB 2 or 3?
The Seagate part might be an adapter that slips over a 2.5" hard drive (used from a Toshiba laptop). The Seagate adapter goes from hard drive to a USB 3.0 plug. The hard drive is formatted Ext3 and I'd copied a bunch of files to it. The OS drive is a USB 2 SanDisk Glide @ 8 GB.
Here's the results here:
lsblk
Tried this too after seeing that in your diagnostics: lsblk -afm
lspci
dmesg
I'll get to bed because it's garbage night with high winds and I know the can is going to be way down the street when I wake up LOL Thanks a lot for looking at this Jeff & Bodhi
=========
-= Cloud 9 =-
Edited 1 time(s). Last edit at 03/22/2017 12:33AM by JoeyPogoPlugE02.
-------------------------------------------------------
Jeff thanks for stopping by. Ever since Adorama's Pogoplug blowout/rebate sale two years ago, I've wondered if the mpcie slot could be useful on the Pro model, since the stock wireless didn't work once Debian was installed. So my intention is the experiment to see how fast this gets USB 3 stuff over Gigabit LAN, and if it works, to have a speedy distribution point for when family drops by and they want the family media collection. Sickeningly mundane, but then again "what if" it's faster than I imagine? We'd all be $12-25 away from a frightfully useful home server for files mainly. * Honestly I don't know my ass from a hole in the ground, but am the amateur visionary once a year LOL
So to answer where I can, here goes:
> Does this device use the Renesas uPD720202 chipset
I see it listed, so I'm going with yes.
> ? It says "based on". Isn't the driver available i
> n kernel for this for x86? Is there an ARM specifi
> c version or do you have to recompile it from sour
> ce?
BODHI!
> Have you guys ID'd the new hardware in dmesg yet?
I ran it and added it at the bottom/
> Joey, without reading all the details so far on everything, have you ran or tried running # lsblk and # lspci?
Got that for you below.
> I see a Seagate drive is showing up in lsusb, but
> not showing in fdisk. Is this a good, Linux file s
> ystem formatted hdd and is it USB 2 or 3?
The Seagate part might be an adapter that slips over a 2.5" hard drive (used from a Toshiba laptop). The Seagate adapter goes from hard drive to a USB 3.0 plug. The hard drive is formatted Ext3 and I'd copied a bunch of files to it. The OS drive is a USB 2 SanDisk Glide @ 8 GB.
Here's the results here:
lsblk
root@DebianPlug:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 1 7.3G 0 disk `-sda1 8:1 1 7.2G 0 part / sdb 8:16 0 465.8G 0 disk zram0 253:0 0 22.1M 0 disk [SWAP] zram1 253:1 0 22.1M 0 disk [SWAP] zram2 253:2 0 22.1M 0 disk [SWAP] zram3 253:3 0 22.1M 0 disk [SWAP] mtdblock0 31:0 0 14M 0 disk mtdblock1 31:1 0 114M 0 disk
Tried this too after seeing that in your diagnostics: lsblk -afm
NAME FSTYPE LABEL UUID MOUNTPOINT NAME SIZE OWNER GROUP MODE sda sda 7.3G root floppy brw-rw---T `-sda1 ext3 rootfs c506c475-6973-4ad0-b8d2-6d0401f82880 / `-sda1 7.2G root floppy brw-rw---T sdb sdb 465.8G root floppy brw-rw---T loop0 loop0 root disk brw-rw---T loop1 loop1 root disk brw-rw---T loop2 loop2 root disk brw-rw---T loop3 loop3 root disk brw-rw---T loop4 loop4 root disk brw-rw---T loop5 loop5 root disk brw-rw---T loop6 loop6 root disk brw-rw---T loop7 loop7 root disk brw-rw---T zram0 swap ac619b47-db81-45e4-abcf-785bdfac7e9b [SWAP] zram0 22.1M root disk brw-rw---T zram1 swap 11e7b621-0c17-4819-9180-917036d34dec [SWAP] zram1 22.1M root disk brw-rw---T zram2 swap 2da87ded-2475-43ee-a2a3-b1cf04de1b66 [SWAP] zram2 22.1M root disk brw-rw---T zram3 swap 62d505d7-3e93-4112-903d-d6debba3450a [SWAP] zram3 22.1M root disk brw-rw---T mtdblock0 mtdblock0 14M root disk brw-rw---T mtdblock1 mtdblock1 114M root disk brw-rw---T root@DebianPlug:~# root@DebianPlug:~#
lspci
root@DebianPlug:~# lspci 00:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02) root@DebianPlug:~#
dmesg
root@DebianPlug:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.48-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Wed Feb 15 02:59:11 PST 2017
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Pogoplug V3 Pro
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c08a6980, node_mem_map c7ef9000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[ 0.000000] pcpu-alloc: s17696 r8192 d23264 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 117048K/131072K available (6406K kernel code, 288K rwdata, 1908K rodata, 228K init, 247K bss, 14024K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0826ddc (8316 kB)
.init : 0xc0827000 - 0xc0860000 ( 228 kB)
.data : 0xc0860000 - 0xc08a8338 ( 289 kB)
.bss : 0xc08a8338 - 0xc08e6310 ( 248 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:160
[ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.000163] Console: colour dummy device 80x30
[ 0.000194] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[ 0.050024] pid_max: default: 32768 minimum: 301
[ 0.050188] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050206] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.051010] Initializing cgroup subsys net_cls
[ 0.051092] CPU: Testing write buffer coherency: ok
[ 0.051517] Setting up static identity map for 0x60008220 - 0x60008258
[ 0.190133] Brought up 2 CPUs
[ 0.190156] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[ 0.190937] devtmpfs: initialized
[ 0.195960] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.196226] prandom: seed boundary self test passed
[ 0.200642] prandom: 100 self tests passed
[ 0.200668] pinctrl core: initialized pinctrl subsystem
[ 0.201489] NET: Registered protocol family 16
[ 0.202030] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.230016] cpuidle: using governor ladder
[ 0.260014] cpuidle: using governor menu
[ 0.265059] gpio-oxnas 44000000.gpio: at address c8848000
[ 0.265446] gpio-oxnas 44100000.gpio: at address c884a000
[ 0.266004] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[ 0.388620] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[ 0.388705] oxnas-pcie 47c00000.pcie-controller: link up
[ 0.389012] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[ 0.389038] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[ 0.389056] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[ 0.389071] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
[ 0.389089] pci_bus 0000:00: root bus resource [bus 00-7f]
[ 0.389148] pci 0000:00:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.389240] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 0.389419] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.389770] PCI: bus0: Fast back to back transfers disabled
[ 0.389862] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48001fff 64bit]
[ 0.390405] vgaarb: loaded
[ 0.390896] SCSI subsystem initialized
[ 0.391257] libata version 3.00 loaded.
[ 0.391774] usbcore: registered new interface driver usbfs
[ 0.391879] usbcore: registered new interface driver hub
[ 0.392035] usbcore: registered new device driver usb
[ 0.392248] pps_core: LinuxPPS API ver. 1 registered
[ 0.392263] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.392307] PTP clock support registered
[ 0.394439] clocksource: Switched to clocksource rps_clocksource_timer
[ 0.412840] NET: Registered protocol family 2
[ 0.413734] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.413775] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.413808] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.413905] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.413946] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.414210] NET: Registered protocol family 1
[ 0.414750] RPC: Registered named UNIX socket transport module.
[ 0.414771] RPC: Registered udp transport module.
[ 0.414781] RPC: Registered tcp transport module.
[ 0.414794] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.414855] pci 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.414927] PCI: CLS 32 bytes, default 32
[ 0.415260] Unpacking initramfs...
[ 0.805478] Freeing initrd memory: 3644K (c7a99000 - c7e28000)
[ 0.806868] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.807032] Initialise system trusted keyring
[ 0.819801] zbud: loaded
[ 0.825126] NFS: Registering the id_resolver key type
[ 0.825187] Key type id_resolver registered
[ 0.825203] Key type id_legacy registered
[ 0.825244] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.825267] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.826219] fuse init (API version 7.23)
[ 0.828200] Key type big_key registered
[ 0.905963] Key type asymmetric registered
[ 0.905996] Asymmetric key parser 'x509' registered
[ 0.906124] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.906150] io scheduler noop registered
[ 0.906170] io scheduler deadline registered
[ 0.906229] io scheduler cfq registered (default)
[ 0.906867] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.908523] console [ttyS0] disabled
[ 0.908618] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[ 1.494151] console [ttyS0] enabled
[ 1.509015] loop: module loaded
[ 1.761057] scsi host0: sata_oxnas
[ 1.814277] ata1: SATA max UDMA/133 irq 7
[ 1.818370] sata_oxnas: resetting SATA core
[ 1.819456] nand: Could not find valid ONFI parameter page; aborting
[ 1.819496] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 1.819502] nand: Hynix NAND 128MiB 3,3V 8-bit
[ 1.819509] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.819527] Scanning device for bad blocks
[ 1.902031] 2 ofpart partitions found on MTD device 41000000.nand
[ 1.908101] Creating 2 MTD partitions on "41000000.nand":
[ 1.913505] 0x000000000000-0x000000e00000 : "boot"
[ 1.920281] 0x000000e00000-0x000008000000 : "data"
[ 1.927569] oxnas-gmac 40400000.ethernet: no reset control found
[ 1.933611] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 1.938636] Ring mode enabled
[ 1.941696] DMA HW capability register supported
[ 1.946201] Enhanced/Alternate descriptors
[ 1.950551] Enabled extended descriptors
[ 1.954539] RX Checksum Offload Engine supported (type 2)
[ 1.960025] TX Checksum insertion supported
[ 1.964270] Wake-Up On Lan supported
[ 1.967907] Enable RX Mitigation via HW Watchdog Timer
[ 1.989017] libphy: stmmac: probed
[ 1.992471] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[ 1.998883] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[ 2.005578] PPP generic driver version 2.4.2
[ 2.010529] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.017036] ehci-pci: EHCI PCI platform driver
[ 2.021931] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 2.027430] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 2.035297] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[ 2.060011] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 2.066362] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.073180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.080404] usb usb1: Product: EHCI Host Controller
[ 2.085260] usb usb1: Manufacturer: Linux 4.4.48-oxnas-tld-1 ehci_hcd
[ 2.091694] usb usb1: SerialNumber: 40200100.ehci
[ 2.097341] hub 1-0:1.0: USB hub found
[ 2.101199] hub 1-0:1.0: 2 ports detected
[ 2.106211] xhci_hcd 0000:00:00.0: xHCI Host Controller
[ 2.111521] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 2
[ 2.124441] xhci_hcd 0000:00:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[ 2.133332] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.140154] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.147343] usb usb2: Product: xHCI Host Controller
[ 2.152222] usb usb2: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[ 2.158632] usb usb2: SerialNumber: 0000:00:00.0
[ 2.164218] hub 2-0:1.0: USB hub found
[ 2.168033] hub 2-0:1.0: 2 ports detected
[ 2.172958] xhci_hcd 0000:00:00.0: xHCI Host Controller
[ 2.178183] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 3
[ 2.185784] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.194150] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.201157] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.208348] usb usb3: Product: xHCI Host Controller
[ 2.210150] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.218657] usb usb3: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[ 2.225100] usb usb3: SerialNumber: 0000:00:00.0
[ 2.230743] hub 3-0:1.0: USB hub found
[ 2.234570] hub 3-0:1.0: 2 ports detected
[ 2.239685] usbcore: registered new interface driver cdc_acm
[ 2.245373] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.253491] usbcore: registered new interface driver cdc_wdm
[ 2.259335] usbcore: registered new interface driver usb-storage
[ 2.265566] usbcore: registered new interface driver usbserial
[ 2.271769] usbcore: registered new interface driver usbserial_generic
[ 2.278330] usbserial: USB Serial support registered for generic
[ 2.284776] mousedev: PS/2 mouse device common for all mice
[ 2.290544] i2c /dev entries driver
[ 2.295354] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.301278] usbcore: registered new interface driver usbhid
[ 2.306826] usbhid: USB HID core driver
[ 2.312683] NET: Registered protocol family 10
[ 2.330549] sit: IPv6 over IPv4 tunneling driver
[ 2.336130] NET: Registered protocol family 17
[ 2.341521] Key type dns_resolver registered
[ 2.347097] registered taskstats version 1
[ 2.351262] Loading compiled-in X.509 certificates
[ 2.356239] zswap: loaded using pool lzo/zbud
[ 2.376606] Key type encrypted registered
[ 2.384012] Freeing unused kernel memory: 228K (c0827000 - c0860000)
[ 2.420075] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[ 2.526571] udevd[99]: starting version 175
[ 2.572149] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.578839] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.610088] usb 1-1: Product: USB2.0 Hub
[ 2.623237] hub 1-1:1.0: USB hub found
[ 2.633182] hub 1-1:1.0: 4 ports detected
[ 2.941585] usb 1-1.1: new high-speed USB device number 3 using oxnas-ehci
[ 3.061893] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5575
[ 3.068759] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.092190] usb 1-1.1: Product: Cruzer Glide
[ 3.096450] usb 1-1.1: Manufacturer: SanDisk
[ 3.100766] usb 1-1.1: SerialNumber: 4C530201370809103182
[ 3.107960] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 3.114805] scsi host1: usb-storage 1-1.1:1.0
[ 3.143144] usbcore: registered new interface driver uas
[ 4.121195] scsi 1:0:0:0: Direct-Access SanDisk Cruzer Glide 1.27 PQ: 0 ANSI: 6
[ 4.133985] sd 1:0:0:0: [sda] 15330304 512-byte logical blocks: (7.85 GB/7.31 GiB)
[ 4.143902] sd 1:0:0:0: [sda] Write Protect is off
[ 4.148697] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 4.149808] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.179683] sda: sda1
[ 4.187064] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 13.446412] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 13.491136] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 15.008714] udevd[297]: starting version 175
[ 16.895462] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 17.190289] random: nonblocking pool is initialized
[ 17.195261] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 20.349383] Adding 1048572k swap on /swapfile1. Priority:-1 extents:360 across:1169636k FS
[ 23.152112] zram: Added device: zram0
[ 23.172615] zram: Added device: zram1
[ 23.186810] zram: Added device: zram2
[ 23.211320] zram: Added device: zram3
[ 23.237949] zram0: detected capacity change from 0 to 23220224
[ 23.317455] Adding 22672k swap on /dev/zram0. Priority:10 extents:1 across:22672k SSFS
[ 23.335470] zram1: detected capacity change from 0 to 23220224
[ 23.398763] Adding 22672k swap on /dev/zram1. Priority:10 extents:1 across:22672k SSFS
[ 23.409781] zram2: detected capacity change from 0 to 23220224
[ 23.474910] Adding 22672k swap on /dev/zram2. Priority:10 extents:1 across:22672k SSFS
[ 23.486512] zram3: detected capacity change from 0 to 23220224
[ 23.574958] Adding 22672k swap on /dev/zram3. Priority:10 extents:1 across:22672k SSFS
[ 28.880153] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 49.137761] zram: Cannot change disksize for initialized device
[ 49.227724] zram: Cannot change disksize for initialized device
[ 49.314690] zram: Cannot change disksize for initialized device
[ 49.394734] zram: Cannot change disksize for initialized device
[ 137.494873] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 137.526282] usb 3-2: New USB device found, idVendor=0bc2, idProduct=ab00
[ 137.533009] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 137.540546] usb 3-2: Product: Slim
[ 137.543941] usb 3-2: Manufacturer: Seagate
[ 137.548016] usb 3-2: SerialNumber: 52AB4031F0QZ
[ 137.569395] scsi host2: uas
[ 137.832714] scsi 2:0:0:0: Direct-Access Seagate Slim 6408 PQ: 0 ANSI: 6
[ 137.844544] sd 2:0:0:0: [sdb] Spinning up disk...
root@DebianPlug:~#
I'll get to bed because it's garbage night with high winds and I know the can is going to be way down the street when I wake up LOL Thanks a lot for looking at this Jeff & Bodhi
=========
-= Cloud 9 =-
Edited 1 time(s). Last edit at 03/22/2017 12:33AM by JoeyPogoPlugE02.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 03:27AM |
Admin Registered: 13 years ago Posts: 18,542 |
@Joey.
Everything looks good. But you need to create the USB partition correctly. There is no partition on the drive
See the sda partition listed above:
If the partition was created correctly, then you would see a similar line for sdb1.
And by the way, you can install a full Linux Mint on USB drive, there is no need for hard disk. After you booted with the Live Mint USB, plug in another USB drive and install Mint to that drive.
@Jeff
The PCIe driver is OK. This Pogo V3 box uses its own pcie-oxnas driver.
The Intel xHCI driver (USB 3.0) is already mainline (this is used in the Pogo V4 too). So as they advertised that this card FW implemented Intel xHCI standard, I hope that will work. So far it does look like it's working. Joey just needs to get the drive format correctly. Then we will see.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Everything looks good. But you need to create the USB partition correctly. There is no partition on the drive
root@DebianPlug:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 1 7.3G 0 disk `-sda1 8:1 1 7.2G 0 part / sdb 8:16 0 465.8G 0 disk zram0 253:0 0 22.1M 0 disk [SWAP] zram1 253:1 0 22.1M 0 disk [SWAP] zram2 253:2 0 22.1M 0 disk [SWAP] zram3 253:3 0 22.1M 0 disk [SWAP] mtdblock0 31:0 0 14M 0 disk mtdblock1 31:1 0 114M 0 disk
See the sda partition listed above:
sda 8:0 1 7.3G 0 disk `-sda1 8:1 1 7.2G 0 part /and now the USB 3.0 disk
sdb 8:16 0 465.8G 0 disk
If the partition was created correctly, then you would see a similar line for sdb1.
And by the way, you can install a full Linux Mint on USB drive, there is no need for hard disk. After you booted with the Live Mint USB, plug in another USB drive and install Mint to that drive.
@Jeff
Quote
Does this device use the Renesas uPD720202 chipset? It says "based on". Isn't the driver available in kernel for this for x86? Is there an ARM specific version or do you have to recompile it from source? Have you guys ID'd the new hardware in dmesg yet?
The PCIe driver is OK. This Pogo V3 box uses its own pcie-oxnas driver.
The Intel xHCI driver (USB 3.0) is already mainline (this is used in the Pogo V4 too). So as they advertised that this card FW implemented Intel xHCI standard, I hope that will work. So far it does look like it's working. Joey just needs to get the drive format correctly. Then we will see.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 06:47AM |
Registered: 11 years ago Posts: 1,303 |
JoeyPogoPlugE02 Wrote:
-------------------------------------------------------
> dmesg
>
Joey,
What comes after the above last line ([ 137.844544] sd 2:0:0:0: [sdb] Spinning up disk.) of your dmesg output? If there is no activity shown w.r.t the HDD, then there is a chance (I could be wrong) the HDD does not get enough power to spin up.
-------------------------------------------------------
> dmesg
>
> root@DebianPlug:~# dmesg > . > : > [ 137.494873] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd > [ 137.526282] usb 3-2: New USB device found, idVendor=0bc2, idProduct=ab00 > [ 137.533009] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 > [ 137.540546] usb 3-2: Product: Slim > [ 137.543941] usb 3-2: Manufacturer: Seagate > [ 137.548016] usb 3-2: SerialNumber: 52AB4031F0QZ > [ 137.569395] scsi host2: uas > [ 137.832714] scsi 2:0:0:0: Direct-Access Seagate Slim 6408 PQ: 0 ANSI: 6 > [ 137.844544] sd 2:0:0:0: [sdb] Spinning up disk. > .. > root@DebianPlug:~# > >>
Joey,
What comes after the above last line ([ 137.844544] sd 2:0:0:0: [sdb] Spinning up disk.) of your dmesg output? If there is no activity shown w.r.t the HDD, then there is a chance (I could be wrong) the HDD does not get enough power to spin up.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 03:21PM |
Registered: 9 years ago Posts: 1,516 |
@ everyone:
It looks very much like Habibie is right about the low power. I checked with my meter and of two 5v supplies, one is 4.6v and the other is 4.1v. One of these is a heavier-duty (supposedly) that's used to power 3.5" hard drives when an adapter is used to get SATA to USB. I haven't re-tried Pogoplug's own 5v out, but... we've been there.
* yes bodhi I installed CinnoMint 18.1 to USB and formatted the drive again. Right before I did that Mint complained it couldn't mount it because of a superblock error, and I thought " aha! that's it!" but no it wasn't all of it LOL I got a screenshot but saved it on the USB stick.
So it looks like my 5v supplies are few and far between here. Of course I'll try something heavier like a desktop computer wired out to it but I don't think I can do it today.
Below are some commands I ran once the Ext4-formatted hard drive was plugged into the USB 3 port.
My sincere thanks for everyone's time and expertise. I'll be here in the background trying to get better quality control. I'm near giving up on this project because it's hard to imagine a good power supply that isn't wasting enough power overall to negate its diminishing returns, is that t? Not done yet, just almost.
Check ye:
=========
-= Cloud 9 =-
Edited 1 time(s). Last edit at 03/22/2017 03:25PM by JoeyPogoPlugE02.
It looks very much like Habibie is right about the low power. I checked with my meter and of two 5v supplies, one is 4.6v and the other is 4.1v. One of these is a heavier-duty (supposedly) that's used to power 3.5" hard drives when an adapter is used to get SATA to USB. I haven't re-tried Pogoplug's own 5v out, but... we've been there.
* yes bodhi I installed CinnoMint 18.1 to USB and formatted the drive again. Right before I did that Mint complained it couldn't mount it because of a superblock error, and I thought " aha! that's it!" but no it wasn't all of it LOL I got a screenshot but saved it on the USB stick.
So it looks like my 5v supplies are few and far between here. Of course I'll try something heavier like a desktop computer wired out to it but I don't think I can do it today.
Below are some commands I ran once the Ext4-formatted hard drive was plugged into the USB 3 port.
My sincere thanks for everyone's time and expertise. I'll be here in the background trying to get better quality control. I'm near giving up on this project because it's hard to imagine a good power supply that isn't wasting enough power overall to negate its diminishing returns, is that t? Not done yet, just almost.
Check ye:
root@DebianPlug:~# fdisk -l
Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaaaaaaaa
Device Boot Start End Sectors Size Id Type
/dev/mtdblock0p1 ? 2863311530 5726623059 2863311530 1.3T aa unknown
/dev/mtdblock0p2 ? 2863311530 5726623059 2863311530 1.3T aa unknown
/dev/mtdblock0p3 ? 2863311530 4294989139 1431677610 682.7G aa unknown
/dev/mtdblock0p4 ? 2863311530 5721052499 2857740970 1.3T aa unknown
Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 7.3 GiB, 7849115648 bytes, 15330304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01ecce21
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 15147007 15144960 7.2G 83 Linux
Disk /dev/zram0: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
root@DebianPlug:~# lspci
00:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)
root@DebianPlug:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.48-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Wed Feb 15 02:59:11 PST 2017
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Pogoplug V3 Pro
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c08a6980, node_mem_map c7ef9000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[ 0.000000] pcpu-alloc: s17696 r8192 d23264 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 117048K/131072K available (6406K kernel code, 288K rwdata, 1908K rodata, 228K init, 247K bss, 14024K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0826ddc (8316 kB)
.init : 0xc0827000 - 0xc0860000 ( 228 kB)
.data : 0xc0860000 - 0xc08a8338 ( 289 kB)
.bss : 0xc08a8338 - 0xc08e6310 ( 248 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:160
[ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.000007] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.000161] Console: colour dummy device 80x30
[ 0.000192] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[ 0.050019] pid_max: default: 32768 minimum: 301
[ 0.050183] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.051005] Initializing cgroup subsys net_cls
[ 0.051092] CPU: Testing write buffer coherency: ok
[ 0.051512] Setting up static identity map for 0x60008220 - 0x60008258
[ 0.190136] Brought up 2 CPUs
[ 0.190159] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[ 0.190940] devtmpfs: initialized
[ 0.196042] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.196305] prandom: seed boundary self test passed
[ 0.200721] prandom: 100 self tests passed
[ 0.200747] pinctrl core: initialized pinctrl subsystem
[ 0.201556] NET: Registered protocol family 16
[ 0.202091] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.230016] cpuidle: using governor ladder
[ 0.260014] cpuidle: using governor menu
[ 0.265062] gpio-oxnas 44000000.gpio: at address c8848000
[ 0.265446] gpio-oxnas 44100000.gpio: at address c884a000
[ 0.266017] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[ 0.388659] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[ 0.388743] oxnas-pcie 47c00000.pcie-controller: link up
[ 0.389056] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[ 0.389081] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[ 0.389099] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[ 0.389114] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
[ 0.389132] pci_bus 0000:00: root bus resource [bus 00-7f]
[ 0.389196] pci 0000:00:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.389286] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 0.389468] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.389836] PCI: bus0: Fast back to back transfers disabled
[ 0.389928] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48001fff 64bit]
[ 0.390481] vgaarb: loaded
[ 0.390973] SCSI subsystem initialized
[ 0.391336] libata version 3.00 loaded.
[ 0.391866] usbcore: registered new interface driver usbfs
[ 0.391976] usbcore: registered new interface driver hub
[ 0.392135] usbcore: registered new device driver usb
[ 0.392345] pps_core: LinuxPPS API ver. 1 registered
[ 0.392360] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.392407] PTP clock support registered
[ 0.394503] clocksource: Switched to clocksource rps_clocksource_timer
[ 0.413158] NET: Registered protocol family 2
[ 0.414046] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.414087] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.414120] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.414215] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.414259] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.414517] NET: Registered protocol family 1
[ 0.415065] RPC: Registered named UNIX socket transport module.
[ 0.415086] RPC: Registered udp transport module.
[ 0.415096] RPC: Registered tcp transport module.
[ 0.415109] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.415170] pci 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.415242] PCI: CLS 32 bytes, default 32
[ 0.415577] Unpacking initramfs...
[ 0.805690] Freeing initrd memory: 3644K (c7a99000 - c7e28000)
[ 0.807111] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.807280] Initialise system trusted keyring
[ 0.820398] zbud: loaded
[ 0.825538] NFS: Registering the id_resolver key type
[ 0.825600] Key type id_resolver registered
[ 0.825615] Key type id_legacy registered
[ 0.825658] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.825684] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.826595] fuse init (API version 7.23)
[ 0.828597] Key type big_key registered
[ 0.906647] Key type asymmetric registered
[ 0.906680] Asymmetric key parser 'x509' registered
[ 0.906810] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.906839] io scheduler noop registered
[ 0.906859] io scheduler deadline registered
[ 0.906918] io scheduler cfq registered (default)
[ 0.907558] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.909184] console [ttyS0] disabled
[ 0.909283] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[ 1.494935] console [ttyS0] enabled
[ 1.509813] loop: module loaded
[ 1.761843] scsi host0: sata_oxnas
[ 1.815080] ata1: SATA max UDMA/133 irq 7
[ 1.819174] sata_oxnas: resetting SATA core
[ 1.820303] nand: Could not find valid ONFI parameter page; aborting
[ 1.820344] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 1.820349] nand: Hynix NAND 128MiB 3,3V 8-bit
[ 1.820359] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.820377] Scanning device for bad blocks
[ 1.902233] 2 ofpart partitions found on MTD device 41000000.nand
[ 1.908298] Creating 2 MTD partitions on "41000000.nand":
[ 1.913702] 0x000000000000-0x000000e00000 : "boot"
[ 1.920442] 0x000000e00000-0x000008000000 : "data"
[ 1.927726] oxnas-gmac 40400000.ethernet: no reset control found
[ 1.933765] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 1.938785] Ring mode enabled
[ 1.941847] DMA HW capability register supported
[ 1.946352] Enhanced/Alternate descriptors
[ 1.950704] Enabled extended descriptors
[ 1.954690] RX Checksum Offload Engine supported (type 2)
[ 1.960161] TX Checksum insertion supported
[ 1.964403] Wake-Up On Lan supported
[ 1.968043] Enable RX Mitigation via HW Watchdog Timer
[ 1.988928] libphy: stmmac: probed
[ 1.992376] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[ 1.998786] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[ 2.005570] PPP generic driver version 2.4.2
[ 2.010536] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.017047] ehci-pci: EHCI PCI platform driver
[ 2.021941] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 2.027438] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 2.035302] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[ 2.060001] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 2.066327] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.073154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.080373] usb usb1: Product: EHCI Host Controller
[ 2.085232] usb usb1: Manufacturer: Linux 4.4.48-oxnas-tld-1 ehci_hcd
[ 2.091665] usb usb1: SerialNumber: 40200100.ehci
[ 2.097295] hub 1-0:1.0: USB hub found
[ 2.101153] hub 1-0:1.0: 2 ports detected
[ 2.106142] xhci_hcd 0000:00:00.0: xHCI Host Controller
[ 2.111452] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 2
[ 2.124362] xhci_hcd 0000:00:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[ 2.133263] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.140067] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.147256] usb usb2: Product: xHCI Host Controller
[ 2.152138] usb usb2: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[ 2.158548] usb usb2: SerialNumber: 0000:00:00.0
[ 2.164154] hub 2-0:1.0: USB hub found
[ 2.167971] hub 2-0:1.0: 2 ports detected
[ 2.172912] xhci_hcd 0000:00:00.0: xHCI Host Controller
[ 2.178137] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 3
[ 2.185751] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.194129] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.201126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.208322] usb usb3: Product: xHCI Host Controller
[ 2.210147] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.218629] usb usb3: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[ 2.225075] usb usb3: SerialNumber: 0000:00:00.0
[ 2.230730] hub 3-0:1.0: USB hub found
[ 2.234554] hub 3-0:1.0: 2 ports detected
[ 2.239677] usbcore: registered new interface driver cdc_acm
[ 2.245368] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.253493] usbcore: registered new interface driver cdc_wdm
[ 2.259351] usbcore: registered new interface driver usb-storage
[ 2.265576] usbcore: registered new interface driver usbserial
[ 2.271777] usbcore: registered new interface driver usbserial_generic
[ 2.278338] usbserial: USB Serial support registered for generic
[ 2.284789] mousedev: PS/2 mouse device common for all mice
[ 2.290560] i2c /dev entries driver
[ 2.295377] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.301299] usbcore: registered new interface driver usbhid
[ 2.306849] usbhid: USB HID core driver
[ 2.312788] NET: Registered protocol family 10
[ 2.330547] sit: IPv6 over IPv4 tunneling driver
[ 2.336140] NET: Registered protocol family 17
[ 2.341532] Key type dns_resolver registered
[ 2.347102] registered taskstats version 1
[ 2.351272] Loading compiled-in X.509 certificates
[ 2.356252] zswap: loaded using pool lzo/zbud
[ 2.376750] Key type encrypted registered
[ 2.384069] Freeing unused kernel memory: 228K (c0827000 - c0860000)
[ 2.420093] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[ 2.527792] udevd[99]: starting version 175
[ 2.572014] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.578700] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.600133] usb 1-1: Product: USB2.0 Hub
[ 2.627077] hub 1-1:1.0: USB hub found
[ 2.636707] hub 1-1:1.0: 4 ports detected
[ 2.930214] usb 1-1.1: new high-speed USB device number 3 using oxnas-ehci
[ 3.051207] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5575
[ 3.058060] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.065418] usb 1-1.1: Product: Cruzer Glide
[ 3.069667] usb 1-1.1: Manufacturer: SanDisk
[ 3.073984] usb 1-1.1: SerialNumber: 4C530201370809103182
[ 3.081349] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 3.088097] scsi host1: usb-storage 1-1.1:1.0
[ 3.116170] usbcore: registered new interface driver uas
[ 4.091824] scsi 1:0:0:0: Direct-Access SanDisk Cruzer Glide 1.27 PQ: 0 ANSI: 6
[ 4.107750] sd 1:0:0:0: [sda] 15330304 512-byte logical blocks: (7.85 GB/7.31 GiB)
[ 4.118469] sd 1:0:0:0: [sda] Write Protect is off
[ 4.123645] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 4.124684] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.146173] sda: sda1
[ 4.153927] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 13.421104] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 13.443412] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.945195] udevd[296]: starting version 175
[ 16.800192] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 17.080248] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 17.120517] random: nonblocking pool is initialized
[ 20.252198] Adding 1048572k swap on /swapfile1. Priority:-1 extents:360 across:1169636k FS
[ 22.971755] zram: Added device: zram0
[ 22.992330] zram: Added device: zram1
[ 23.013939] zram: Added device: zram2
[ 23.030574] zram: Added device: zram3
[ 23.064058] zram0: detected capacity change from 0 to 23220224
[ 23.137912] Adding 22672k swap on /dev/zram0. Priority:10 extents:1 across:22672k SSFS
[ 23.150750] zram1: detected capacity change from 0 to 23220224
[ 23.214848] Adding 22672k swap on /dev/zram1. Priority:10 extents:1 across:22672k SSFS
[ 23.225538] zram2: detected capacity change from 0 to 23220224
[ 23.301084] Adding 22672k swap on /dev/zram2. Priority:10 extents:1 across:22672k SSFS
[ 23.311872] zram3: detected capacity change from 0 to 23220224
[ 23.373706] Adding 22672k swap on /dev/zram3. Priority:10 extents:1 across:22672k SSFS
[ 28.790156] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 31.790126] oxnas-gmac 40400000.ethernet eth0: Link is Down
[ 32.790159] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 35.790131] oxnas-gmac 40400000.ethernet eth0: Link is Down
[ 36.790159] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 39.790133] oxnas-gmac 40400000.ethernet eth0: Link is Down
[ 40.790159] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 43.790156] oxnas-gmac 40400000.ethernet eth0: Link is Down
[ 44.790161] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 72.397716] zram: Cannot change disksize for initialized device
[ 72.477928] zram: Cannot change disksize for initialized device
[ 72.603338] zram: Cannot change disksize for initialized device
[ 72.684208] zram: Cannot change disksize for initialized device
[ 321.718433] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 321.746432] usb 3-2: New USB device found, idVendor=0bc2, idProduct=ab00
[ 321.753157] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 321.760291] usb 3-2: Product: Slim
[ 321.763678] usb 3-2: Manufacturer: Seagate
[ 321.767751] usb 3-2: SerialNumber: 52AB4031F0QZ
[ 321.800286] scsi host2: uas
[ 322.056330] scsi 2:0:0:0: Direct-Access Seagate Slim 6408 PQ: 0 ANSI: 6
[ 322.066396] sd 2:0:0:0: [sdb] Spinning up disk...
[ 323.080084] ...................................................................................................not responding...
[ 422.335997] sd 2:0:0:0: [sdb] 312581807 512-byte logical blocks: (160 GB/149 GiB)
[ 429.427466] xhci_hcd 0000:00:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 429.436746] xhci_hcd 0000:00:00.0: @0000000066b0e8c0 00000000 00000000 1b000000 01038001
[ 436.518812] xhci_hcd 0000:00:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 436.528097] xhci_hcd 0000:00:00.0: @0000000066b0e900 00000000 00000000 1b000000 01038001
root@DebianPlug:~# lsusb
Bus 003 Device 002: ID 0bc2:ab00 Seagate RSS LLC
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
=========
-= Cloud 9 =-
Edited 1 time(s). Last edit at 03/22/2017 03:25PM by JoeyPogoPlugE02.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 04:17PM |
Admin Registered: 13 years ago Posts: 18,542 |
Joey,
Use a flash USB 3.0 drive and you will have enough power.
You did before and it worked.
The only problem you had at that tine was the partition format.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Use a flash USB 3.0 drive and you will have enough power.
You did before and it worked.
The only problem you had at that tine was the partition format.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 04:32PM |
Registered: 11 years ago Posts: 1,303 |
JoeyPogoPlugE02 Wrote:
-------------------------------------------------------
>
I noticed from the above output of dmesg, you have a Seagate Slim 1TB SATA HDD(?) that is USB powered. If so, then any USB ports on a PogoPlug Pro should be able to deliver enough power to it. When, I tried a 2 TB Seagate 2.5" SATA HDD on my PogoPlug Pro and any of its USB2 ports had no problem to deliver power to the HDD.
-------------------------------------------------------
>
> root@DebianPlug:~# dmesg > . > : > [ 321.718433] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd > [ 321.746432] usb 3-2: New USB device found, idVendor=0bc2, idProduct=ab00 > [ 321.753157] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 > [ 321.760291] usb 3-2: Product: Slim > [ 321.763678] usb 3-2: Manufacturer: Seagate > [ 321.767751] usb 3-2: SerialNumber: 52AB4031F0QZ > [ 321.800286] scsi host2: uas > [ 322.056330] scsi 2:0:0:0: Direct-Access Seagate Slim 6408 PQ: 0 ANSI: 6 > [ 322.066396] sd 2:0:0:0: [sdb] Spinning up disk. > .. > [ 323.080084] ...................................................................................................not responding... > [ 422.335997] sd 2:0:0:0: [sdb] 312581807 512-byte logical blocks: (160 GB/149 GiB) > [ 429.427466] xhci_hcd 0000:00:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring > [ 429.436746] xhci_hcd 0000:00:00.0: @0000000066b0e8c0 00000000 00000000 1b000000 01038001 > [ 436.518812] xhci_hcd 0000:00:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring > [ 436.528097] xhci_hcd 0000:00:00.0: @0000000066b0e900 00000000 00000000 1b000000 01038001 > root@DebianPlug:~# lsusb > Bus 003 Device 002: ID 0bc2:ab00 Seagate RSS LLC > Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 001 Device 003: ID 0781:5575 SanDisk Corp. > Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > >Joey,
I noticed from the above output of dmesg, you have a Seagate Slim 1TB SATA HDD(?) that is USB powered. If so, then any USB ports on a PogoPlug Pro should be able to deliver enough power to it. When, I tried a 2 TB Seagate 2.5" SATA HDD on my PogoPlug Pro and any of its USB2 ports had no problem to deliver power to the HDD.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 05:36PM |
Admin Registered: 13 years ago Posts: 18,542 |
> If so, then any USB ports on a PogoPlug Pro sho
> uld be able to deliver enough power to it. When, I
> tried a 2 TB Seagate 2.5" SATA HDD on my PogoPlug
> Pro and any of its USB2 ports had no problem to de
> liver power to the HDD.
Correct. The USB port should provide 5V and enough Amp to run USB 2.5" HDD.
However, I would not use USB HDD for this test, so that we can eliminate a variable out of potential problems.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> uld be able to deliver enough power to it. When, I
> tried a 2 TB Seagate 2.5" SATA HDD on my PogoPlug
> Pro and any of its USB2 ports had no problem to de
> liver power to the HDD.
Correct. The USB port should provide 5V and enough Amp to run USB 2.5" HDD.
However, I would not use USB HDD for this test, so that we can eliminate a variable out of potential problems.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 07:33PM |
Registered: 9 years ago Posts: 1,516 |
Yeah Pogoplug's own USB 5v really is 5 volts.
I just tried starting it up and mounting the hard drive one last time and right when it was mounting it froze. It acted a lot friendlier than previous trials. So I'll try one last time with a USB stick formatted from Mint, and shelve this and have answered the question.
It's just not fun and even if it worked it's impracticable from being touchy from 10 angles. So here goes, give me a little bit.
=========
-= Cloud 9 =-
I just tried starting it up and mounting the hard drive one last time and right when it was mounting it froze. It acted a lot friendlier than previous trials. So I'll try one last time with a USB stick formatted from Mint, and shelve this and have answered the question.
It's just not fun and even if it worked it's impracticable from being touchy from 10 angles. So here goes, give me a little bit.
=========
-= Cloud 9 =-
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 07:42PM |
Admin Registered: 13 years ago Posts: 18,542 |
OK Joey!
I've just test it with my USB power hub. It works fine :) I just dig out my Orico USB 3.0 power hub and connect it to one of the USB port on the daughter card.
Let me post the result here in a moment.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/22/2017 07:44PM by bodhi.
I've just test it with my USB power hub. It works fine :) I just dig out my Orico USB 3.0 power hub and connect it to one of the USB port on the daughter card.
Let me post the result here in a moment.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/22/2017 07:44PM by bodhi.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 08:04PM |
Admin Registered: 13 years ago Posts: 18,542 |
root@PogoPro:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.54-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Pogoplug V3 Pro
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c08a69c0, node_mem_map c7ef9000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[ 0.000000] pcpu-alloc: s17696 r8192 d23264 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data) earlyprintk=serial
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 116688K/131072K available (6410K kernel code, 288K rwdata, 1908K rodata, 224K init, 247K bss, 14384K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0827e14 (8320 kB)
.init : 0xc0828000 - 0xc0860000 ( 224 kB)
.data : 0xc0860000 - 0xc08a8378 ( 289 kB)
.bss : 0xc08a8378 - 0xc08e6350 ( 248 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:160
[ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.008343] Console: colour dummy device 80x30
[ 0.012902] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440)
[ 0.062597] pid_max: default: 32768 minimum: 301
[ 0.067443] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.074150] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.082122] Initializing cgroup subsys net_cls
[ 0.086699] CPU: Testing write buffer coherency: ok
[ 0.092119] Setting up static identity map for 0x60008220 - 0x60008258
[ 0.229957] Brought up 2 CPUs
[ 0.233003] SMP: Total of 2 processors activated (638.97 BogoMIPS).
[ 0.240194] devtmpfs: initialized
[ 0.249077] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.259033] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.265548] prandom: seed boundary self test passed
[ 0.275151] prandom: 100 self tests passed
[ 0.279324] pinctrl core: initialized pinctrl subsystem
[ 0.285550] NET: Registered protocol family 16
[ 0.290718] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.319823] cpuidle: using governor ladder
[ 0.349813] cpuidle: using governor menu
[ 0.359272] gpio-oxnas 44000000.gpio: at address c8848000
[ 0.365199] gpio-oxnas 44100000.gpio: at address c884a000
[ 0.371302] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[ 0.501606] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[ 0.509061] oxnas-pcie 47c00000.pcie-controller: link up
[ 0.514780] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[ 0.522191] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[ 0.529123] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[ 0.536514] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
[ 0.542871] pci_bus 0000:00: root bus resource [bus 00-7f]
[ 0.548467] pci 0000:00:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.548559] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 0.548746] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.549125] PCI: bus0: Fast back to back transfers disabled
[ 0.554880] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48001fff 64bit]
[ 0.562759] vgaarb: loaded
[ 0.566044] SCSI subsystem initialized
[ 0.570283] libata version 3.00 loaded.
[ 0.570813] usbcore: registered new interface driver usbfs
[ 0.576453] usbcore: registered new interface driver hub
[ 0.582023] usbcore: registered new device driver usb
[ 0.587348] pps_core: LinuxPPS API ver. 1 registered
[ 0.592417] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.601661] PTP clock support registered
[ 0.607953] clocksource: Switched to clocksource rps_clocksource_timer
[ 0.634513] NET: Registered protocol family 2
[ 0.639920] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.646970] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.653442] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.659978] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.665899] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.672524] NET: Registered protocol family 1
[ 0.677529] RPC: Registered named UNIX socket transport module.
[ 0.683560] RPC: Registered udp transport module.
[ 0.688327] RPC: Registered tcp transport module.
[ 0.693114] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.699663] pci 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.705469] PCI: CLS 32 bytes, default 32
[ 0.705843] Unpacking initramfs...
[ 1.164974] Freeing initrd memory: 4004K (c7a43000 - c7e2c000)
[ 1.172559] Initialise system trusted keyring
[ 1.190725] zbud: loaded
[ 1.211251] NFS: Registering the id_resolver key type
[ 1.216417] Key type id_resolver registered
[ 1.220746] Key type id_legacy registered
[ 1.224862] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.231654] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.239083] fuse init (API version 7.23)
[ 1.245299] Key type big_key registered
[ 1.333611] Key type asymmetric registered
[ 1.337792] Asymmetric key parser 'x509' registered
[ 1.343009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.350691] io scheduler noop registered
[ 1.354693] io scheduler deadline registered
[ 1.359088] io scheduler cfq registered (default)
[ 1.364643] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 1.372782] console [ttyS0] disabled
[ 1.376512] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[ 1.385254] console [ttyS0] enabled
[ 1.392355] bootconsole [earlycon0] disabled
[ 1.449541] loop: module loaded
[ 1.454845] scsi host0: sata_oxnas
[ 1.458785] ata1: SATA max UDMA/133 irq 7
[ 1.462919] sata_oxnas: resetting SATA core
[ 1.464005] nand: Could not find valid ONFI parameter page; aborting
[ 1.464048] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 1.464053] nand: Hynix NAND 128MiB 3,3V 8-bit
[ 1.464064] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.464081] Scanning device for bad blocks
[ 1.547010] 2 cmdlinepart partitions found on MTD device 41000000.nand
[ 1.553536] Creating 2 MTD partitions on "41000000.nand":
[ 1.558932] 0x000000000000-0x000000e00000 : "boot"
[ 1.565806] 0x000000e00000-0x000008000000 : "data"
[ 1.573227] oxnas-gmac 40400000.ethernet: no reset control found
[ 1.579220] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 1.584281] Ring mode enabled
[ 1.587320] DMA HW capability register supported
[ 1.591843] Enhanced/Alternate descriptors
[ 1.596175] Enabled extended descriptors
[ 1.600176] RX Checksum Offload Engine supported (type 2)
[ 1.605632] TX Checksum insertion supported
[ 1.609873] Wake-Up On Lan supported
[ 1.613529] Enable RX Mitigation via HW Watchdog Timer
[ 1.635944] libphy: stmmac: probed
[ 1.639342] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[ 1.645849] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[ 1.652664] PPP generic driver version 2.4.2
[ 1.657559] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.664209] ehci-pci: EHCI PCI platform driver
[ 1.669050] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 1.674659] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 1.682549] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[ 1.699950] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 1.706283] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.713080] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.720289] usb usb1: Product: EHCI Host Controller
[ 1.725148] usb usb1: Manufacturer: Linux 4.4.54-oxnas-tld-1 ehci_hcd
[ 1.731573] usb usb1: SerialNumber: 40200100.ehci
[ 1.737256] hub 1-0:1.0: USB hub found
[ 1.741153] hub 1-0:1.0: 2 ports detected
[ 1.746227] xhci_hcd 0000:00:00.0: xHCI Host Controller
[ 1.751595] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 2
[ 1.849817] ata1: SATA link down (SStatus 0 SControl 310)
[ 1.869160] xhci_hcd 0000:00:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[ 1.878036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.884830] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.892039] usb usb2: Product: xHCI Host Controller
[ 1.896898] usb usb2: Manufacturer: Linux 4.4.54-oxnas-tld-1 xhci-hcd
[ 1.903326] usb usb2: SerialNumber: 0000:00:00.0
[ 1.908999] hub 2-0:1.0: USB hub found
[ 1.912896] hub 2-0:1.0: 2 ports detected
[ 1.917811] xhci_hcd 0000:00:00.0: xHCI Host Controller
[ 1.923138] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 3
[ 1.930772] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.939112] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.946101] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.953326] usb usb3: Product: xHCI Host Controller
[ 1.958179] usb usb3: Manufacturer: Linux 4.4.54-oxnas-tld-1 xhci-hcd
[ 1.964625] usb usb3: SerialNumber: 0000:00:00.0
[ 1.970368] hub 3-0:1.0: USB hub found
[ 1.974182] hub 3-0:1.0: 2 ports detected
[ 1.979635] usbcore: registered new interface driver cdc_acm
[ 1.985369] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.993538] usbcore: registered new interface driver cdc_wdm
[ 1.999413] usbcore: registered new interface driver usb-storage
[ 2.005913] usbcore: registered new interface driver usbserial
[ 2.012065] usbcore: registered new interface driver usbserial_generic
[ 2.018624] usbserial: USB Serial support registered for generic
[ 2.025077] mousedev: PS/2 mouse device common for all mice
[ 2.030924] i2c /dev entries driver
[ 2.035806] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.041569] usbcore: registered new interface driver usbhid
[ 2.047116] usbhid: USB HID core driver
[ 2.053153] NET: Registered protocol family 10
[ 2.059018] sit: IPv6 over IPv4 tunneling driver
[ 2.063705] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[ 2.071464] NET: Registered protocol family 17
[ 2.076060] Key type dns_resolver registered
[ 2.082296] registered taskstats version 1
[ 2.086420] Loading compiled-in X.509 certificates
[ 2.091407] zswap: loaded using pool lzo/zbud
[ 2.113431] Key type encrypted registered
[ 2.132866] Freeing unused kernel memory: 224K (c0828000 - c0860000)
[ 2.232875] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.239567] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.246766] usb 1-1: Product: USB2.0 Hub
[ 2.252318] hub 1-1:1.0: USB hub found
[ 2.258042] hub 1-1:1.0: 4 ports detected
[ 2.290403] systemd-udevd[101]: starting version 215
[ 2.301137] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.350789] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 2.376634] usb 3-2: New USB device found, idVendor=0781, idProduct=5583
[ 2.421747] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.428879] usb 3-2: Product: Ultra Fit
[ 2.450951] usb 3-2: Manufacturer: SanDisk
[ 2.455055] usb 3-2: SerialNumber: xxxxxxxxxxxxxxxxx
[ 2.483676] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 2.510289] scsi host1: usb-storage 3-2:1.0
[ 2.560046] usb 1-1.4: new high-speed USB device number 3 using oxnas-ehci
[ 2.672409] usb 1-1.4: New USB device found, idVendor=0781, idProduct=5583
[ 2.679280] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.686830] usb 1-1.4: Product: Ultra Fit
[ 2.690885] usb 1-1.4: Manufacturer: SanDisk
[ 2.695144] usb 1-1.4: SerialNumber: xxxxxxxxxxxxxxxxx
[ 2.706511] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 2.730314] scsi host2: usb-storage 1-1.4:1.0
[ 2.770055] usbcore: registered new interface driver uas
[ 3.260236] xhci_hcd 0000:00:00.0: Cannot set link state.
[ 3.265671] usb usb3-port1: cannot disable (err = -32)
[ 3.511610] scsi 1:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[ 3.524400] sd 1:0:0:0: [sda] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 3.535800] sd 1:0:0:0: [sda] Write Protect is off
[ 3.540966] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 3.543216] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.561845] sda: sda1
[ 3.569479] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 3.731578] scsi 2:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[ 3.747105] sd 2:0:0:0: [sdb] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 3.758906] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.763965] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3.765347] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.785180] sdb: sdb1
[ 3.793684] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 12.846776] netpoll: netconsole: local port 6666
[ 12.851678] netpoll: netconsole: local IPv4 address 192.168.0.222
[ 12.857748] netpoll: netconsole: interface 'eth0'
[ 12.862499] netpoll: netconsole: remote port 6666
[ 12.867184] netpoll: netconsole: remote IPv4 address 192.168.0.220
[ 12.873369] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[ 12.880258] netpoll: netconsole: device eth0 not up yet, forcing it
[ 13.033541] netpoll: netconsole: carrier detect appears untrustworthy, waiting 4 seconds
[ 17.063815] console [netcon0] enabled
[ 17.067471] netconsole: network logging started
[ 17.383971] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.284183] systemd-udevd[331]: starting version 215
[ 19.355240] random: udevd: uninitialized urandom read (16 bytes read, 104 bits of entropy available)
[ 19.376271] random: udevd: uninitialized urandom read (16 bytes read, 104 bits of entropy available)
[ 19.980774] random: nonblocking pool is initialized
[ 21.836838] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 22.190476] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 23.738490] Adding 1048572k swap on /swapfile1. Priority:-1 extents:8 across:1130492k FS
[ 52.047895] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 52.060052] NFSD: starting 90-second grace period (net c089f940)
root@PogoPro:~# lspci 00:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)
root@PogoPro:~# lsusb Bus 003 Device 002: ID 0781:5583 SanDisk Corp. Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0781:5583 SanDisk Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@PogoPro:~# fdisk -l Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xaaaaaaaa Device Boot Start End Sectors Size Id Type /dev/mtdblock0p1 ? 2863311530 5726623059 2863311530 1.3T aa unknown /dev/mtdblock0p2 ? 2863311530 5726623059 2863311530 1.3T aa unknown /dev/mtdblock0p3 ? 2863311530 4294989139 1431677610 682.7G aa unknown /dev/mtdblock0p4 ? 2863311530 5721052499 2857740970 1.3T aa unknown Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/sda: 14.3 GiB, 15376000000 bytes, 30031250 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000 Device Boot Start End Sectors Size Id Type /dev/sda1 32 30031249 30031218 14.3G c W95 FAT32 (LBA) Disk /dev/sdb: 14.3 GiB, 15376000000 bytes, 30031250 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x6c109196 Device Boot Start End Sectors Size Id Type /dev/sdb1 * 2048 30031249 30029202 14.3G 83 Linux
root@PogoPro:~# e2label /dev/sdb1 rootfs
root@PogoPro:~# mount /dev/sdb1 /media/rootfs -o noatime
root@PogoPro:~# ll /media/rootfs total 1048696 drwxr-xr-x 25 root root 4096 Jun 3 2016 . drwxrwxrwx 15 root root 4096 Nov 23 2015 .. drwxr-xr-x 2 root root 4096 Jun 3 2016 bin drwxr-xr-x 5 root root 4096 Mar 19 2017 boot drwxr-xr-x 2 root root 4096 Jul 4 2015 .cedata -rw-r--r-- 1 root root 30 May 8 2015 .ceid drwxr-xr-x 5 root root 4096 Jan 21 2011 dev drwxr-xr-x 105 root root 4096 Jun 5 2016 etc drwxr-xr-x 2 root root 4096 Dec 14 2010 home drwxr-xr-x 16 root root 4096 May 13 2016 lib drwxrwxrwx 3 root root 4096 Jul 4 2015 localdisk drwx------ 2 root root 16384 Jan 21 2011 lost+found drwxrwxrwx 15 root root 4096 Nov 23 2015 media drwxr-xr-x 3 root root 4096 Apr 10 2015 mnt drwxr-xr-x 3 root root 4096 Apr 5 2011 nonexistent drwxr-xr-x 2 root root 4096 Jan 21 2011 opt drwxr-xr-x 2 root root 4096 Dec 14 2010 proc drwx------ 20 root root 4096 Dec 12 2016 root drwxr-xr-x 4 root root 4096 Mar 2 2015 run drwxr-xr-x 2 root root 4096 Jun 5 2016 sbin drwxr-xr-x 2 root root 4096 Mar 2 2015 .smb drwxr-xr-x 2 root root 4096 Jan 21 2011 srv -rw------- 1 root root 1073741824 Jun 3 2016 swapfile1 drwxr-xr-x 2 root root 4096 Dec 31 2010 sys drwxrwxrwt 2 root root 4096 Dec 31 16:00 tmp drwxr-xr-x 10 root root 4096 Jan 21 2011 usr drwxr-xr-x 11 root root 4096 Dec 31 16:00 var
root@PogoPro:/localdisk/temp# hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 374 MB in 2.00 seconds = 186.94 MB/sec Timing buffered disk reads: 78 MB in 3.05 seconds = 25.59 MB/sec
I will do the write test later tonight.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 08:26PM |
Admin Registered: 13 years ago Posts: 18,542 |
Hold on :) that seems to be the wrong disk!
I'll try again later.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
I'll try again later.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 08:28PM |
Registered: 9 years ago Posts: 1,516 |
Well congratulations bodhi, but I give up. Something about when this mounts it wrecks the operation of the Pogoplug. At first I mounted it as you can see, and couldn't find files I copied there after formatting in Mint. Then I couldn't copy files to it. So I tried mounting again and got error, but a lot of telling stuff on some of the diagnostics.
583.388052 looks about right :-/
So enjoy yours, I'll try mine in Windows in a few days and if it's broke try to get a refund. Cant' say low voltage fried it either because I ran this off Pogoplug power and we've used a new USB stick and an old hard drive.
Actually, having said that it looks like there's widespread problems with XHCI/USB 3.0 and many Linux kernels.
Google'ing or DuckDuckGo'ing gets relevant results:
=========
-= Cloud 9 =-
Edited 2 time(s). Last edit at 03/22/2017 09:17PM by JoeyPogoPlugE02.
583.388052 looks about right :-/
login as: root
root@192.168.178.104's password:
Linux DebianPlug 4.4.48-oxnas-tld-1 #1 SMP PREEMPT Wed Feb 15 02:59:11 PST 2017 armv6l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Mar 22 20:12:08 2017 from 192.168.178.103
root@DebianPlug:~# mkdir -p /media/JoeyUSB3
root@DebianPlug:~# mount -o noatime /dev/sdb1 /media/JoeyUSB3
root@DebianPlug:~# mount -o noatime /dev/sdb1 /media/JoeyUSB3
mount: special device /dev/sdb1 does not exist
root@DebianPlug:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.48-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Wed Feb 15 02:59:11 PST 2017
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Pogoplug V3 Pro
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c08a6980, node_mem_map c7ef9000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[ 0.000000] pcpu-alloc: s17696 r8192 d23264 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 117048K/131072K available (6406K kernel code, 288K rwdata, 1908K rodata, 228K init, 247K bss, 14024K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0826ddc (8316 kB)
.init : 0xc0827000 - 0xc0860000 ( 228 kB)
.data : 0xc0860000 - 0xc08a8338 ( 289 kB)
.bss : 0xc08a8338 - 0xc08e6310 ( 248 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:160
[ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.000007] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.000161] Console: colour dummy device 80x30
[ 0.000192] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[ 0.050019] pid_max: default: 32768 minimum: 301
[ 0.050183] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.051005] Initializing cgroup subsys net_cls
[ 0.051087] CPU: Testing write buffer coherency: ok
[ 0.051512] Setting up static identity map for 0x60008220 - 0x60008258
[ 0.190133] Brought up 2 CPUs
[ 0.190156] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[ 0.190940] devtmpfs: initialized
[ 0.195857] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.196121] prandom: seed boundary self test passed
[ 0.200537] prandom: 100 self tests passed
[ 0.200565] pinctrl core: initialized pinctrl subsystem
[ 0.201400] NET: Registered protocol family 16
[ 0.201940] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.230018] cpuidle: using governor ladder
[ 0.260011] cpuidle: using governor menu
[ 0.265064] gpio-oxnas 44000000.gpio: at address c8848000
[ 0.265456] gpio-oxnas 44100000.gpio: at address c884a000
[ 0.266014] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[ 0.388710] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[ 0.388828] oxnas-pcie 47c00000.pcie-controller: link up
[ 0.389137] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[ 0.389160] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[ 0.389176] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[ 0.389191] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
[ 0.389207] pci_bus 0000:00: root bus resource [bus 00-7f]
[ 0.389268] pci 0000:00:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.389358] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 0.389539] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.389895] PCI: bus0: Fast back to back transfers disabled
[ 0.390046] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48001fff 64bit]
[ 0.390525] vgaarb: loaded
[ 0.391016] SCSI subsystem initialized
[ 0.391380] libata version 3.00 loaded.
[ 0.391884] usbcore: registered new interface driver usbfs
[ 0.391989] usbcore: registered new interface driver hub
[ 0.392143] usbcore: registered new device driver usb
[ 0.392355] pps_core: LinuxPPS API ver. 1 registered
[ 0.392368] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.392417] PTP clock support registered
[ 0.394539] clocksource: Switched to clocksource rps_clocksource_timer
[ 0.412835] NET: Registered protocol family 2
[ 0.413713] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.413752] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.413788] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.413888] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.413928] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.414197] NET: Registered protocol family 1
[ 0.414740] RPC: Registered named UNIX socket transport module.
[ 0.414760] RPC: Registered udp transport module.
[ 0.414771] RPC: Registered tcp transport module.
[ 0.414781] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.414842] pci 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.414917] PCI: CLS 32 bytes, default 32
[ 0.415249] Unpacking initramfs...
[ 0.805811] Freeing initrd memory: 3644K (c7a99000 - c7e28000)
[ 0.807203] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.807372] Initialise system trusted keyring
[ 0.820741] zbud: loaded
[ 0.825904] NFS: Registering the id_resolver key type
[ 0.825963] Key type id_resolver registered
[ 0.825976] Key type id_legacy registered
[ 0.826022] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.826045] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.826974] fuse init (API version 7.23)
[ 0.828986] Key type big_key registered
[ 0.906992] Key type asymmetric registered
[ 0.907028] Asymmetric key parser 'x509' registered
[ 0.907156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.907182] io scheduler noop registered
[ 0.907202] io scheduler deadline registered
[ 0.907256] io scheduler cfq registered (default)
[ 0.907909] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.909557] console [ttyS0] disabled
[ 0.909652] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[ 1.495344] console [ttyS0] enabled
[ 1.510241] loop: module loaded
[ 1.762245] scsi host0: sata_oxnas
[ 1.815467] ata1: SATA max UDMA/133 irq 7
[ 1.819560] sata_oxnas: resetting SATA core
[ 1.820695] nand: Could not find valid ONFI parameter page; aborting
[ 1.820736] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 1.820743] nand: Hynix NAND 128MiB 3,3V 8-bit
[ 1.820751] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.820766] Scanning device for bad blocks
[ 1.903262] 2 ofpart partitions found on MTD device 41000000.nand
[ 1.909329] Creating 2 MTD partitions on "41000000.nand":
[ 1.914736] 0x000000000000-0x000000e00000 : "boot"
[ 1.921533] 0x000000e00000-0x000008000000 : "data"
[ 1.928808] oxnas-gmac 40400000.ethernet: no reset control found
[ 1.934848] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 1.939873] Ring mode enabled
[ 1.942929] DMA HW capability register supported
[ 1.947435] Enhanced/Alternate descriptors
[ 1.951787] Enabled extended descriptors
[ 1.955776] RX Checksum Offload Engine supported (type 2)
[ 1.961254] TX Checksum insertion supported
[ 1.965498] Wake-Up On Lan supported
[ 1.969136] Enable RX Mitigation via HW Watchdog Timer
[ 1.990302] libphy: stmmac: probed
[ 1.993699] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[ 2.000153] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[ 2.006824] PPP generic driver version 2.4.2
[ 2.011724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.018232] ehci-pci: EHCI PCI platform driver
[ 2.023119] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 2.028618] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 2.036518] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[ 2.060011] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 2.066342] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.073162] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.080381] usb usb1: Product: EHCI Host Controller
[ 2.085237] usb usb1: Manufacturer: Linux 4.4.48-oxnas-tld-1 ehci_hcd
[ 2.091671] usb usb1: SerialNumber: 40200100.ehci
[ 2.097308] hub 1-0:1.0: USB hub found
[ 2.101168] hub 1-0:1.0: 2 ports detected
[ 2.106193] xhci_hcd 0000:00:00.0: xHCI Host Controller
[ 2.111500] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 2
[ 2.124418] xhci_hcd 0000:00:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[ 2.133317] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.140134] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.147325] usb usb2: Product: xHCI Host Controller
[ 2.152202] usb usb2: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[ 2.158612] usb usb2: SerialNumber: 0000:00:00.0
[ 2.164213] hub 2-0:1.0: USB hub found
[ 2.168033] hub 2-0:1.0: 2 ports detected
[ 2.172974] xhci_hcd 0000:00:00.0: xHCI Host Controller
[ 2.178201] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 3
[ 2.185804] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.194181] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.201198] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.208391] usb usb3: Product: xHCI Host Controller
[ 2.210152] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.218700] usb usb3: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[ 2.225144] usb usb3: SerialNumber: 0000:00:00.0
[ 2.230796] hub 3-0:1.0: USB hub found
[ 2.234618] hub 3-0:1.0: 2 ports detected
[ 2.239728] usbcore: registered new interface driver cdc_acm
[ 2.245419] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.253537] usbcore: registered new interface driver cdc_wdm
[ 2.259389] usbcore: registered new interface driver usb-storage
[ 2.265612] usbcore: registered new interface driver usbserial
[ 2.271818] usbcore: registered new interface driver usbserial_generic
[ 2.278382] usbserial: USB Serial support registered for generic
[ 2.284830] mousedev: PS/2 mouse device common for all mice
[ 2.290598] i2c /dev entries driver
[ 2.295418] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.301342] usbcore: registered new interface driver usbhid
[ 2.306887] usbhid: USB HID core driver
[ 2.312721] NET: Registered protocol family 10
[ 2.330552] sit: IPv6 over IPv4 tunneling driver
[ 2.336117] NET: Registered protocol family 17
[ 2.341509] Key type dns_resolver registered
[ 2.347069] registered taskstats version 1
[ 2.351237] Loading compiled-in X.509 certificates
[ 2.356213] zswap: loaded using pool lzo/zbud
[ 2.376604] Key type encrypted registered
[ 2.383938] Freeing unused kernel memory: 228K (c0827000 - c0860000)
[ 2.420090] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[ 2.527892] udevd[99]: starting version 175
[ 2.572108] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.578792] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.633175] usb 1-1: Product: USB2.0 Hub
[ 2.670510] hub 1-1:1.0: USB hub found
[ 2.690122] hub 1-1:1.0: 4 ports detected
[ 3.000069] usb 1-1.1: new high-speed USB device number 3 using oxnas-ehci
[ 3.121177] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5575
[ 3.128028] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.135349] usb 1-1.1: Product: Cruzer Glide
[ 3.139601] usb 1-1.1: Manufacturer: SanDisk
[ 3.143892] usb 1-1.1: SerialNumber: 4C530201370809103182
[ 3.150689] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 3.157455] scsi host1: usb-storage 1-1.1:1.0
[ 3.184445] usbcore: registered new interface driver uas
[ 4.161912] scsi 1:0:0:0: Direct-Access SanDisk Cruzer Glide 1.27 PQ: 0 ANSI: 6
[ 4.176192] sd 1:0:0:0: [sda] 15330304 512-byte logical blocks: (7.85 GB/7.31 GiB)
[ 4.187281] sd 1:0:0:0: [sda] Write Protect is off
[ 4.192268] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 4.193423] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.212085] sda: sda1
[ 4.223283] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 13.868968] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 13.894215] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 15.411499] udevd[300]: starting version 175
[ 17.266836] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 17.304230] random: nonblocking pool is initialized
[ 17.569418] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 20.735810] Adding 1048572k swap on /swapfile1. Priority:-1 extents:360 across:1169636k FS
[ 22.926819] zram: Added device: zram0
[ 22.939673] zram: Added device: zram1
[ 22.948623] zram: Added device: zram2
[ 22.972715] zram: Added device: zram3
[ 23.022553] zram0: detected capacity change from 0 to 23220224
[ 23.094883] Adding 22672k swap on /dev/zram0. Priority:10 extents:1 across:22672k SSFS
[ 23.107051] zram1: detected capacity change from 0 to 23220224
[ 23.167669] Adding 22672k swap on /dev/zram1. Priority:10 extents:1 across:22672k SSFS
[ 23.178672] zram2: detected capacity change from 0 to 23220224
[ 23.243128] Adding 22672k swap on /dev/zram2. Priority:10 extents:1 across:22672k SSFS
[ 23.253701] zram3: detected capacity change from 0 to 23220224
[ 23.328614] Adding 22672k swap on /dev/zram3. Priority:10 extents:1 across:22672k SSFS
[ 28.700303] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 52.242145] zram: Cannot change disksize for initialized device
[ 52.343787] zram: Cannot change disksize for initialized device
[ 52.452183] zram: Cannot change disksize for initialized device
[ 52.555481] zram: Cannot change disksize for initialized device
[ 507.040739] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 507.065103] usb 3-2: New USB device found, idVendor=0781, idProduct=5581
[ 507.071843] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 507.078947] usb 3-2: Product: Ultra
[ 507.082483] usb 3-2: Manufacturer: SanDisk
[ 507.086807] usb 3-2: SerialNumber: 4C530001320111116341
[ 507.101637] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 507.120440] scsi host2: usb-storage 3-2:1.0
[ 508.140997] scsi 2:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
[ 508.156935] sd 2:0:0:0: [sdb] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB)
[ 508.168212] sd 2:0:0:0: [sdb] Write Protect is off
[ 508.173099] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 508.180490] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 508.201103] sdb: sdb1
[ 508.215139] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 583.380247] xhci_hcd 0000:00:00.0: xHCI host not responding to stop endpoint command.
[ 583.388052] xhci_hcd 0000:00:00.0: Assuming host is dying, halting host.
[ 583.394787] xhci_hcd 0000:00:00.0: HC died; cleaning up
[ 583.400729] usb 3-2: USB disconnect, device number 2
[ 583.420385] sd 2:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
[ 583.428549] sd 2:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 00 00 08 00 00 00 08 00
[ 583.436129] blk_update_request: I/O error, dev sdb, sector 2048
[ 583.442045] Buffer I/O error on dev sdb1, logical block 0, lost sync page write
[ 583.457914] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 592.260303] Buffer I/O error on dev sdb1, logical block 3702784, lost sync page write
[ 592.268108] JBD2: Error -5 detected when updating journal superblock for sdb1-8.
[ 592.275909] Aborting journal on device sdb1-8.
[ 592.280448] Buffer I/O error on dev sdb1, logical block 3702784, lost sync page write
[ 592.288245] JBD2: Error -5 detected when updating journal superblock for sdb1-8.
[ 597.266296] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[ 600.133199] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[ 604.556794] EXT4-fs error (device sdb1): ext4_find_entry:1450: inode #2: comm smbd: reading directory lblock 0
[ 604.567055] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[ 604.583582] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[ 604.601100] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[ 604.617082] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[ 604.650664] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[ 604.671342] EXT4-fs error (device sdb1): ext4_find_entry:1450: inode #2: comm smbd: reading directory lblock 0
[ 604.681592] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[ 636.548459] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
root@DebianPlug:~# lspci
00:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)
root@DebianPlug:~# lsusb
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@DebianPlug:~# fdisk -l
Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaaaaaaaa
Device Boot Start End Sectors Size Id Type
/dev/mtdblock0p1 ? 2863311530 5726623059 2863311530 1.3T aa unknown
/dev/mtdblock0p2 ? 2863311530 5726623059 2863311530 1.3T aa unknown
/dev/mtdblock0p3 ? 2863311530 4294989139 1431677610 682.7G aa unknown
/dev/mtdblock0p4 ? 2863311530 5721052499 2857740970 1.3T aa unknown
Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 7.3 GiB, 7849115648 bytes, 15330304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01ecce21
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 15147007 15144960 7.2G 83 Linux
Disk /dev/zram0: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
root@DebianPlug:~# e2label /dev/sdb1
e2label: No such file or directory while trying to open /dev/sdb1
Couldn't find valid filesystem superblock.
So enjoy yours, I'll try mine in Windows in a few days and if it's broke try to get a refund. Cant' say low voltage fried it either because I ran this off Pogoplug power and we've used a new USB stick and an old hard drive.
Actually, having said that it looks like there's widespread problems with XHCI/USB 3.0 and many Linux kernels.
Google'ing or DuckDuckGo'ing gets relevant results:
xHCI host not responding to stop endpoint command. Assuming host is dying, halting host. HC died; cleaning up USB disconnect
=========
-= Cloud 9 =-
Edited 2 time(s). Last edit at 03/22/2017 09:17PM by JoeyPogoPlugE02.
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 09:12PM |
Admin Registered: 13 years ago Posts: 18,542 |
Joey,
Calm down:) nothing was broken! That looks like a power problem for the USB 3.0 drive.
Unplug your FD or molex connector. Find any USB power hub, 2.0 is fine. Use that for power.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Calm down:) nothing was broken! That looks like a power problem for the USB 3.0 drive.
Unplug your FD or molex connector. Find any USB power hub, 2.0 is fine. Use that for power.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread March 22, 2017 09:16PM |
Admin Registered: 13 years ago Posts: 18,542 |
I will verify later tonight one way or the other, and I will be done with this experiment and move on to the iConnect.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
